Related Manuals for Siemens WM14Y791GB
Summary of Contents for Siemens WM14Y791GB
- Page 1 Washing machine WM14Y791GB, WM16Y791GB siemens-home.com/welcome Register your product online...
-
Page 2: Your New Washing Machine
Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Siemens, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. -
Page 3: Table Of Contents
Contents e n W a s h i n g m a c h i n e I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Before washing Intended use... -
Page 4: Intended Use
Intended use B e f o r e w a s h i n g For use in the household only. Ø The washing machine is suitable for washing machine- Ø washable textiles and hand-washable wool in wash liquor. The washing machine is suitable to be operated with cold Ø... -
Page 5: Safety Instructions
Safety instructions Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. Warning! Risk to children! –... - Page 6 Caution! Danger of scalding! When washing at high temperatures, you may be scalded if you touch the hot wash liquor (e.g. if draining hot wash liquor into a washbasin or if draining the washing machine in an emergency). Allow detergent solution to cool down. Caution! Risk of damaging appliance! –...
-
Page 7: Protection Of The Environment
Protection of the environment Packaging/Old appliance Dispose of packaging in an environmentally friendly manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU. -
Page 8: The Main Points In Brief
The main points in brief Insert mains plug. Open the washing To switch on, press Select the Turn the tap on. machine door. programme, e.g. button. Cotton. Dosage: 30% ú Please load laundry: max. 8kg Sort the washing. Insert the washing. Do not exceed maximum load. -
Page 9: Getting To Know Your Appliance
Getting to know your appliance... -
Page 10: Detergent Drawer
Detergent drawer Dispenser I Detergent for prewash Softener, starch. Do not exceed the maximum load. Dispenser Dispenser II Detergent for main wash, water softener, bleach, stain remover Insert A for dosing liquid detergent (not for all models) For models with insert for liquid detergent: The detergent drawer features an insert which is used as a dosing aid for liquid detergent. -
Page 11: Operating Elements/Display Elements
Operating elements/Display elements ² All buttons are sensitive, they only need to be touched gently. Switch on and off the appliance. Press Start wash programme. main switch button. Select Start/Reload button to start, Ü interrupt and cancel the programme Select a programme. Rotating the in (e.g. -
Page 12: Before Each Washing
Before each washing O p e r a t i n g t h e a p p l i a n c e – Install and connect washing machine properly. Refer ² to ~ Page 44 – Before the 1st wash, wash once without any washing. ~ Page 53 1. -
Page 13: Preparing The Appliance
Otherwise, the load display may malfunction. ~ Page 32 Press the button. The appliance is switched on. The Siemens logo is indicated on the display panel and all programme indicator lamps are lit. Then always the Cottons programme preset at the factory is displayed. - Page 14 After switching on the appliance, after opening and closing the washing machine door as well as after starting the programme, the drum is lit. The light goes out automatically. Select a programme. You can use the saved programme or select another programme, Programme Overview, refer to ~ Page 22, or select other programmes (see Others) and choose one programme as follows:...
-
Page 15: Changing The Settings Of The Selected Programme
– Do not load washing until the main menu for the saved programme is displayed after the Siemens logo. – The load bar progresses as the washing machine is loaded. If the max. load is exceeded, the bar flashes. Do not exceed indicated max. - Page 16 You can use the displayed presettings or adjust the selected programme optimally to the items of washing by changing the presettings or selecting additional settings/options. Changing the Temperature (°C) Spin ( ) , Finish in (h). Ø Refer to ~ Page 27: e.g.
-
Page 17: Starting The Programme
. Overview of all stains ~ Page 29 Ø ASR Stain Automatic ã Do not let stains dry. Remove solid substances beforehand. Arrange items of washing as usual and load washing machine. Select the programme. Select a stain type (depending on the selected programme). Select ASR Stain Automatic button and select e.g. -
Page 18: Washing
Washing During the wash cycle the programme progress is indicated by a bar on the display panel. The bar progresses in the course of the wash cycle and provides information about the current programme progress. The arrows are switched on and off according to the programme progress. - Page 19 Ø Topping up washing When the programme has started, washing can be reloaded or taken out as required. Select (Start/Pause). Ü ˜ 60°C 2:31h 1600 Pause: Reload is possible – If there is a high water level, high temperature or if the drum ²...
-
Page 20: End Of The Programme
Ø End of programme by Rinse Hold Rinse hold reached: Select "spin" or "drain" and then "start". Spin Drain 1. Select Spin (If required, adjust the spin speed) or Drain. 2. Select (Start/Pause). Ü End of the programme Finished, remove washing is indicated on the display panel. Finished, remove washing If Foam has been detected is also indicated on the display panel, the washing machine has detected too much foam during the... -
Page 21: After Washing
After washing Open washing machine door and remove washing.. Remove the washing. ú Switch off the device. – Do not leave any items of washing in the drum. In the next ² wash they may shrink or discolour something else. –... -
Page 22: Programme Overview
Programme overview The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/information max. load Name of the programme Brief explanation of the programme and for selectable temperature as °C which textiles it is suitable. selectable spin speeds in rpm, the max. - Page 23 The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/information max. 2 kg Wool Hand or machine-washable wool or rich- cold - 30 - 40 °C wool textiles. 0 ... 800 rpm Especially gentle wash programme to prevent shrinkage, longer programme ç...
- Page 24 The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/information max. 2 kg Rapid 15’ Extra short programme approx. 15 minutes, cold - 30 - 40 °C suitable for lightly soiled washing as a small 0 ... 800 ... 1200 rpm amounts of laundry.
- Page 25 ... more programmes The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/information max. 1 kg Dessous For delicate, washable underwear e.g. made cold – 30 – 40 °C of velvet, lace, Lycra, silk or satin. 0 ... 600 rpm ¦...
- Page 26 Starching The washing should not be treated with fabric softener. ² Liquid starch can be used in all wash programmes. Pour starch into the dispenser according to manufacturer’s specifications (if required clean beforehand). Dyeing/Discolouring Dye in household quantities only. Salt may attack stainless steel!Observe specifications of the dye manufacturer! Do not discolourwashing in the washing machine! Soaking...
-
Page 27: Programme Settings/Options
Programme settings/options Depending on the programme, you can use the programme settings to adjust the washing process even more efficiently to your items of washing. Programme settings: – are active without acknowledgement. ² – not retained after appliance is switched off. –... - Page 28 Options button to select: Notes Press ß For heavily soiled washing. Pre-wash on – off Pour detergent into dispensers I and II. Reduces creasing by special spin sequence followed Less Ironing on – off by fluffing and reduced spin speed. ²...
-
Page 29: Anti-Stain System
Anti-stain system General information about stains A total of 16 different stains can be selected. The washing machine adjusts the washing temperature, drum movement and soaking time specific to the type of stain. Hot or cold water, gentle or intensive washing control and long or short soaking provide the wash programme with a special sequence for each type of stain. -
Page 30: Consumption Values
Consumption values Programme Load Energy Water ** Programme consumption ** duration ** Cotton 20 °C 8 kg 0,25 kWh 57 l Cotton 40 °C 8 kg 1,09 kWh 57 l Cotton 60 °C 8 kg 1,43 kWh 57 l Cotton 90 °C 8 kg 2,40 kWh 69 l... -
Page 31: Appliance Settings
Appliance settings By pressing the 3 sec (Basic Setting 3 sec.) buttons, appliance  settings can be changed, e.g. button signal. Simultaneously hold down 3 sec (Basic Setting 3 sec.) buttons  for approx. 3 seconds: Language end signal è button signal If the buttons are held down, the settings automatically run Ø... -
Page 32: Sensors - Your Washing Machine Is So Intelligent
Sensors – Your washing machine is so intelligent Load adjust Depending on the type of textile and load, the load adjust optimally adjusts the water consumption in each programme. Aqua-Sensor depending on model During the rinse cycle the Aqua sensor checks the degree of turbidity (turbidity is caused by dirt and detergent residue) of the rinsing water. -
Page 33: Care And Maintenance
Care and maintenance C l e a n i n g a n d m a i n t e n a n c e Warning! Danger of death from electric shock! Danger of death if live parts are touched. Switch off the appliance. -
Page 34: Cleaning The Detergent Drawer
Cleaning the detergent drawer If it contains detergent or fabric softener residue: Pull out, depress insert, take out drawer all the way. Take out insert: using your finger, press insert upwards. Clean detergent dispenser and insert with water and a brush and dry. - Page 35 Take the drainage hose out of the holder. Remove the sealing cap, drain water into a suitable receptacle. Press on sealing cap and insert drainage hose into the holder. Note: Residual water may run out. Carefully unscrew the pump cover. Clean the interior, pump cover thread and pump housing (fan impeller in the detergent-solution pump must rotate).
-
Page 36: Filter Blocked In Water Inlet Hose
Filter blocked in water inlet hose First, release water pressure in the supply hose: Turn off the tap! Select any programme (except Spin/Drain). Select Start/Pause . Leave programme for approx. 40 Ü seconds. Press the button. Appliance is switched off. Pull out the mains plug! Clean the filter: Disconnect the hose from the water tap. -
Page 37: Emergency Release
Emergency release The programme continues running when the power supply is restored. If the washing is still to be removed, the door can be opened as described below: Warning! Danger of scalding! Wash liquor and washing may be hot. If touched, there is a risk of scalding. -
Page 38: Information On The Display Panel
Information on the display panel Display Cause/Remedy The door cannot be – Washing may be caught. Please open and close washing locked, please open machine door again and select Start/Pause Ü the door again, then – If required, shut washing machine door or remove washing and close it and select shut again. -
Page 39: Faults, What To Do
Faults, what to do? Faults Cause/Remedy Water is running out. – Correctly attach/replace drainage hose. – Tighten screw-fitting on the supply hose. Water not flowing in. – Start/Reload not selected? Ü Detergent not – Tap not open? washed in. – Filter blocked? Clean the filter. ~ Page 36 –... - Page 40 Faults Cause/Remedy Display panel/ – Power failure? indicator lights do – Fuse tripped? Switch on/replace fuse. not function while – If the fault occurs repeatedly, call customer service. ~ Page 41 the appliance is running. The programme – Not a fault – unbalanced load detection system adjusts takes longer than imbalance by repeatedly distributing the washing.
-
Page 41: Customer Service
Customer service If you cannot rectify the fault yourself, Faults, what to do?~ Page 39, please contact our customer service. We will always finds a suitable solution to avoid unnecessary visits by technicians. Please give customer service the product number (E-Nr.) and the production number (FD) of the appliance. -
Page 42: Standard Accessories
Standard accessories I n s t a l l i n g t h e a p p l i a n c e Also required for connection of the water drainage hose to a siphon: 1 hose clip Ø 24–40 mm (DIY store) is also required for connection to a siphon. -
Page 43: Hose And Cable Lengths
Hose and cable lengths If the hose holders are used, the possible hose lengths are ² reduced! Available from dealer/customer service: Extension for Aqua-Stop or cold water inlet hose Ø (approx. 2.50 m). Order no. WMZ2380, WZ10130, CZ11350, Z7070X0 Longer supply hose (approx. 2.20 m), for standard model. Ø... -
Page 44: Installation
Installation Humidity in the drum is caused by the final inspection. ² Secure installation Warning! Risk of injury! – The washing machine is heavy – caution: take care when lifting it. – If the washing machine is raised by protruding components (e.g. -
Page 45: Installation Area
Installation area Stability is important to prevent the washing machine from ² wandering! – The installation area must be firm and level. – Soft floors/floor coverings are not suitable. Installation on a platform with drawer Platform: order no. WMZ 20490, WZ- 20490 Installing the appliance on a base or on a wooden joist ceiling Warning! -
Page 46: Remove Transportation Protection Devices
Remove transportation protection devices Caution! Washing machine may be damaged! Transit bolts which have not been removed may damage e.g. the drum while the washing machine is running. Before using the appliance for the first time, remove the 4 transportation protection devices completely and keep in a safe place. - Page 47 Loosen and remove all 4 transportation lock screws. Take the power cord out of the holders. Remove sleeves. Insert covers. Lock covers firmly by pressing on the locking hook. ²...
-
Page 48: Connecting The Water
Connecting the water Warning! Danger of death from electric shock! Danger of death if live parts are touched. Do not immerse Aqua-Stop safety device in water (contains an electric valve). – To prevent leakage or water damage, follow the instructions ²... - Page 49 on the appliance: for Standard and Aqua-Secure models Carefully turn on the tap and check that the connection points are not leaking. Screw connection is under water pipe pressure. ² Water drainage hose – Do not kink or protract the the water supply hose. ²...
- Page 50 Drainage into a siphon Warning! Water damage possible! If the drainage hose slips off the siphon connection due to high water pressure when draining the washing machine, leaking water may cause damage. Connection point must be secured with hose clip, Ø...
-
Page 51: Alignment
Alignment Loosen lock nut in a clockwise direction with a wrench. Check alignment of the washing machine with a spirit level and, if required, correct. Adjust the height by rotating the foot. All four feet must be firmly on the floor. ²... -
Page 52: Electrical Connection
Electrical connection Electrical safety Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. –... -
Page 53: Before The 1St Washing
Before the 1st washing The washing machine was inspected thoroughly before leaving the factory. To remove any water left over from testing procedures, the first washing cycle should be carried out without laundry in the machine. The washing machine must have been installed and connected ²... -
Page 54: Transportation, E.g. If Moving House
Transportation, e.g. if moving house Preparatory work Turn off the tap. Release the water pressure in the supply hose. Maintenance – Filter in the water inlet hose ~ Page 36 Drain any residual detergent solution. Maintenance – Drain pump blocked ~ Page 34 Isolate the washing machine from the power supply. -
Page 55: Index
Index Alignment, 51 system, 11, 17, 27, 29 Anti-stain Aqua-Sensor, 32 Basic Settings 3 sec., 11 Options, 17 Button speedPerfect, 16 ASR Stain Automatic, 17 Spin, 16 ecoPerfect, 16 Temperature, 16 Finish in, 16 Cancelling Cleaning the programme, 19 the detergent drawer, 34 Care, 33 the filter, 36 Drum, 33... - Page 56 Information on the display the laundry, 14 panel, 38 Installation, 44 Inserting the laundry, 15 Installing transportation Insert the laundry, 13 protection devices, 54 Insert the washing Intended use, 4 Less Ironing, 28 Load sensor/Load display, 32 Load adjust, 32 Maintenance, 33 Old appliance, 7 Options, 11, 17, 27...
- Page 57 Technical specifications, 43 washing, 19 Temperature, 11, 16, 27 Transport bolts, 46 Topping up Unbalanced load detection Unloading system, 32 the laundry, 21 Water Plus, 28...
- Page 60 Calls from a BT landline will be charged at up to 3 pence per minute. 01450 2655 0.03 € per minute at peak. Off peak 0.0088 € per minute. Please find the contact data of all countries in the enclosed customer service list. Siemens-Electrogeräte GmbH Carl-Wery-Straße 34, 81739 München siemens-home.com *9000960342* 9000960342...