Advertisement
Quick Links
Advertisement
Related Manuals for Siemens WM14Y891GR
Summary of Contents for Siemens WM14Y891GR
- Page 1 Instruction Manual and Installation Instructions WM14Y891GR Washing machine www.siemens-home.com...
- Page 2 Please take a couple of minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands of the Siemens brand, each washing machine, which leaves our factory, is inspected thoroughly to ensure that it functions properly and is in perfect condition.
- Page 3 Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Before washing Intended use Ø...
- Page 4 Intended use B e f o r e wa s h i n g For use in the household only. Ø The washing machine is suitable for washing machine- Ø washable textiles and hand-washable wool in wash liquor. The washing machine is suitable to be operated with cold Ø...
- Page 5 Safety instructions ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. ã...
- Page 6 ã Caution! Danger of scalding! When washing at high temperatures, you may be scalded if you touch the hot wash liquor (e.g. if draining hot wash liquor into a washbasin or if draining the washing machine in an emergency). Allow detergent solution to cool down. ã...
- Page 7 Protection of the environment Packaging/Old appliance Dispose of packaging in an environmentally friendly manner. This appliance has been identified in accordance with the European Directive 2002/96/EG on Waste Electrical and Electronic Equipment (WEEE). The Directive specifies the framework for an EU-wide valid return and recycling of waste appliances.
- Page 8 The main points in brief Insert mains plug. Open the washing To switch on, press Select the Turn the tap on. machine door. programme, e.g. button. Βαμβακερά (Cotton). Dosage: automatic ú Please load laundry: max. 9kg Sort the washing. Insert the washing. Do not exceed maximum load.
- Page 9 Getting to know your appliance 2SHUDWLQJ HOHPHQWV 'HWHUJHQW GUDZHU 'LVSOD\ HOHPHQWV 'UXP OLJKW GHSHQGLQJ RQ PRGHO 'RRU 6HUYLFH IODS FODFN 6HUYLFH IODS 2SHQLQJ DQG FORVLQJ WKH GRRU...
- Page 10 Detergent drawer Intelligent Dosing System (i-Dos): Your washing machine features an intelligent dosing system for liquid detergent and sof- tener. Dispensers i-Dos (1.3 l) and i-Dos (0.5 l) in the detergent drawer are used ô ô for this. You can select whether you want to use one liquid detergent and one softener or two liquid detergents.
- Page 11 Operating elements/Display elements ² All buttons are sensitive, they only need to be touched gently. Indicator lights for intelligent dosage (Start/Pause) button Έναρξη/Παύση Ü ~ Page 35 to start, interrupt and cancel the programme (e.g. reload washing). Button ecoPerfect ~ Page 16, ¦...
- Page 12 Before each washing O p e r a t i n g t h e a p p l i a n c e – Install and connect washing machine properly. ² Refer to ~ Page 55 – Before the 1st wash, wash once without any washing. ~ Page 65 1.
- Page 13 Otherwise, the load display may malfunction. ~ Page 41 Press the button. The appliance is switched on. The Siemens logo is indicated on the display panel and all programme indicator lamps are lit. Then always the Βαμβακερά (Cottons) programme preset at the factory is displayed.
- Page 14 – In the shell grip of the detergent drawer the indicator lights for intelligent dosage are lit if intelligent dosage has been selected. – For appliances with drum light: After switching on the appliance, after opening and closing the washing machine door as well as after starting the programme, the drum is lit.
- Page 15 ~ Page 41 – Do not load washing until the main menu for the saved programme is displayed after the Siemens logo. – The load screen is indicated when the door is opened or when the amount of washing is changed.
- Page 16 Change Temperature, Spin, Finish in time: Ø Selecting and changing e.g. the Θερμοκρασία (Temperature): i-Dos ô © 1400 2:31 °C i-Dos øø ô ¨ The arrows on the display panel indicate which buttons are used to change the settings. The settings are active without acknowledgement and are displayed in the main menu.
- Page 17 Μενού (Options). Overview of all options Page 32 Ø ß Select Μενού (Options) and e.g. Water Plus button: ß 60°C 2:31h 1400 Extra rinse Water Plus è Rinse Hold – Select option by pressing the two buttons displayed on the left.
- Page 18 6. Starting the programme Select Έναρξη/Παύσή (Start/Pause). The indicator light Ø Ü is on.
- Page 19 Washing During the wash cycle the programme progress is indicated by a bar on the display panel. The bar progresses in the course of the wash cycle and provides information about the current programme progress. The arrows are switched on and off according to the programme progress.
- Page 20 Ø Topping up washing When the programme has started, washing can be reloaded or taken out as required. Select Έναρξη/Παύση (Start/Pause). Ü i-Dos ô © 1400 2:31 °C i-Dos ø øô ¨ Pause: Reload is possible – If there is a high water level, high temperature or if the drum ²...
- Page 21 Ø End of programme by Rinse Hold Rinse hold reached: Select "spin" or "drain" and then "start". Spin Drain 1. Select Spin (If required, adjust the spin speed) or Drain. 2. Select Έναρξη/Παύση (Start/Pause). Ü End of the programme Finished, remove washing is indicated on the display panel. Finished, remove washing If Foam has been detected is also indicated on the display panel, the washing machine has detected too much foam during the...
- Page 22 After washing Open washing machine door and remove washing.. Remove the washing. ú Switch off the device. – Do not leave any items of washing in the drum. In the next ² wash they may shrink or discolour something else. –...
- Page 23 Programme overview The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information max. load Name of the programme Õ Brief explanation of the programme and selectable temperature as °C for which textiles it is suitable. selectable spin speeds in rpm, the max.
- Page 24 The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information max. 2 kg Μεταξωτά (Delicate/Silk) For delicate, washable textiles, e.g. made cold – 30 – 40 °C of silk, satin, synthetic fibres or blended 0 ... 600 ... 800 rpm fabrics (e.g.
- Page 25 The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information max. 2 kg Πουκάμισα/Μπλούζες (Shirts/Business) cold – 40 – 60 °C Shirts/Blouses made of cotton, linen, 0 ... 800 rpm synthetics fibres or blended fabrics. For non-iron shirts the shirts/blouses are ¦...
- Page 26 see ... Αλλα (Others) (additional programmes) The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information max. 1 kg Lingerie For delicate, washable underwear e.g. made cold – 30 – 40 °C of velvet, lace, Lycra, silk or satin. 0 ...
- Page 27 see ... Αλλα (Others) (additional programmes) The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/Information Spin/Low program Extra spin cycle at reduced speed and with especially gentle spin mechanism. 0 ... 800 ... 1200 rpm æ ç...
- Page 28 Memory The programme and all settings are permanently stored under Memory. Saving: Select Μνήμη (Memory) programme. If a programme has not yet been selected for this memory programme, select programme according to the instructions on the display panel. The selection of the programme is automatically acknowledged by a tick.
- Page 29 Rinse hold reached: Please add to detergent drawer À the water proofing agent and then select "start" Dose textile-guard agent (max. 170 ml) in dispenser À Á Select Έναρξη/Παύση (Start/Pause). After-treatment of Ü the washing according to manufacturer’s instructions. Starching The washing should not be treated with fabric softener.
- Page 30 Programme settings/options Depending on the programme, you can use the programme options to adjust the washing process even more efficiently to your items of washing. Programme settings/options: Are active without acknowledgement. Ø Can be selected or deselected or changed depending on the Ø...
- Page 31 Buttons Notes To change the softener dosage strength (or i-Dos ô detergent when container content: detergent set) for light – normal – the selected programme permanently until the next strong – off change: Page 17 – light: slightly soft washing –...
- Page 32 Notes Press Μενού (Options) ß button to select: For heavily soiled washing. Pre-wash on – off For intelligent dosage: Selected detergent is used for prewash and main wash. To prevent overdosage, select medium i-Dos setting. For manual dosage: Divide detergent for pre-wash and main wash.
- Page 33 Anti-stain system General information about stains The Stains additional programme option for treating special stains can be found via the Μενού (Options) button. Ö A total of 16 different stains can be selected. The washing machine adjusts the washing temperature, drum movement and soaking time specific to the type of stain.
- Page 34 Intelligent Dosing System Your washing machine features an intelligent dosing system for liquid detergent and softener. Dispensers i-Dos (1.3 l) and ô i-Dos (0.5 l) in the detergent drawer are used for this. You ô can select whether you want to use one liquid detergent and one softener or two liquid detergents.
- Page 35 Use only self-flowing liquid products and gels which the Ø manufacturer recommends adding to a detergent drawer. Do not mix different liquid detergents. If changing the liquid Ø detergent (type, manufacturer, ...), empty the dispenser completely. ~ Page 43 Do not use any solvent-based, corrosive or gas-emitting Ø...
- Page 36 The same detergent or softener can be topped up at any time. If the product/manufacturer is changed, we recommend cleaning the dispensers beforehand. ~ Page 43 If required, adjusting the basic dosage. ~ Page 36 Standard settings If required, change basic dosages for detergent and softener: Ø...
- Page 37 Change basic dosage amount. ~ Page 40 If required, convert i-Dos dispenser contents. Ø ô Instead of softener, a second liquid detergent can also be used in dispenser i-Dos ô Change dispenser content. ~ Page 40 ² – When the i-Dos container content is switched from ô...
- Page 38 Manual dosage In the case of programmes in which intelligent dosage is not possible or not requested (then set intelligent dosage to off), detergent is added to detergent drawer À Á In addition to intelligent dosage of detergents - cleaning agents such as water softener, bleach or stain remover can also be dosed here.
- Page 39 Consumption values Programme Load Energy Water *** Programme consumption *** duration *** (Cottons) 20 °C 9 kg 0,32 kWh 64 l Βαμβακερά (Cottons) 40 °C * 9 kg 1,15 kWh 64 l Βαμβακερά (Cottons) 60 °C 9 kg 1,25 kWh 64 l Βαμβακερά...
- Page 40 Appliance settings By pressing the Ρυθμίσεις 3 δευτ. (Settings 3 sec.) buttons, appliance settings can be changed, e.g. button signal. Simultaneously hold down Ρυθμίσεις 3 δευτ. (Settings 3 sec.) buttons for approx. 3 seconds: Language end signal è button signal If the buttons are held down, the settings automatically run Ø...
- Page 41 Sensors – Your washing machine is so intelligent Load adjust Depending on the type of textile and load, the load adjust optimally adjusts the water consumption in each programme. Aqua-Sensor During the wash and rinse cycles the Aqua sensor checks the degree of turbidity (turbidity is caused by dirt and detergent residue) of the washing and rinsing water.
- Page 42 Care and maintenance C l e a n i n g a n d m a i n t e n a n c e ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. Switch off the appliance.
- Page 43 i-Dos Clean the detergent drawer Drain dispensers Ø The dispensers have drainage openings with removable stoppers in the front area. To drain the dispensers, first remove the drawer handle as illustrated: 1. Open detergent drawer. 2. Pull release lever (A) on the back of the drawer handle (bottom middle) gently towards yourself and simultaneously ...
- Page 44 3. Press release lever and completely remove drawer. 4. Carefully remove drawer cover. ã Caution! Detergent drawer may be damaged! The detergent drawer contains electrical components. They may be damaged if they come into contact with water. – Do not clean the cover in the dishwasher and do not immerse in water.
- Page 45 Drain pump blocked ã Warning! Danger of scalding! Wash liquor is hot when washing at high temperatures. You may be scalded if you touch the hot wash liquor. Allow wash liquor to cool down. Turn the tap off to prevent more water from flowing in and to ²...
- Page 46 Insert service flap (1), engage (2) and close (3). To prevent unused detergent from flowing into the outlet during ² the next wash cycle: Pour approx. 1 litre of water into dispenser and start the Drain programme. À Á Drainage hose on the siphon blocked Switch off the appliance.
- Page 47 Remove hose from the rear of the appliance. Take out filter with pliers and clean. Connect the hose and check for leaks.
- Page 48 Emergency lock release, e.g. if power failure occurs The programme continues running when the power supply is restored. If the washing is still to be removed, the door can be opened as described below: ã Warning! Danger of scalding! Wash liquor and washing may be hot. If touched, there is a risk of scalding.
- Page 49 Information on the display panel Display Cause/Remedy The door cannot be – Washing may be caught. Please open and close washing locked, please open machine door again and select Έναρξη/Παύση Ü (Start/ the door again, then Pause). close it and select –...
- Page 50 Faults, what to do? Faults Cause/Remedy Water is running out. – Correctly attach/replace drainage hose. – Tighten screw-fitting on the supply hose. Water not flowing in. – Έναρξη/Παύση Ü (Start/Pause) not selected? – Tap not open? – Filter blocked? Clean the filter. ~ Page 46 –...
- Page 51 Faults Cause/Remedy Odour formation in Run Cottons 90 °C programme without washing. the washing Use standard detergent. machine. Repeated, intensive – Check basic dosage settings and dosage strength. foaming. – If required, use a different liquid detergent. Detergent/softener Too much detergent/softener in the dispensers. Observe max mark drips off the seal and in the dispensers.
- Page 52 Customer service If you cannot rectify the fault yourself, Faults, what to do?~ Page 50, please contact our customer service. We will always finds a suitable solution to avoid unnecessary visits by technicians. Please give customer service the product number (E-Nr.) and the production number (FD) of the appliance.
- Page 53 Standard accessories In s t a l l i n g t h e ap p l i a n c e GHSHQGLQJ RQ PRGHO $TXD6WRS 6WDQGDUG$TXD6HFXUH 0DLQV FDEOH :DWHU RXWOHW :DWHU LQOHW ,QVWUXFWLRQ PDQXDO DQG ,QVWDOODWLRQ LQVWUXFWLRQV &RYHUV (OERZ IRU VHFXULQJ WKH ZDWHU RXWOHW KRVH 6SDQQHU...
- Page 54 Hose and cable lengths GHSHQGLQJ RQ PRGHO &RQQHFWLRQ RQ OHIW VLGH &RQQHFWLRQ RQ ULJKW VLGH a FP a FP a FP a FP PD[ a FP a FP FP a FP a FP If the hose holders are used, the possible hose lengths are ²...
- Page 55 Installation ² Humidity in the drum is caused by the final inspection. Secure installation ã Warning! Risk of injury! – The washing machine is heavy – caution: take care when lifting it. – If the washing machine is raised by protruding components (e.g.
- Page 56 ã Warning! Risk of injury! – The washing machine is heavy – caution: take care when lifting it. – If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and cause injuries. Do not lift the washing machine by its projecting parts.
- Page 57 Installation on a platform with drawer Platform: order no. WMZ 20490, WZ- 20490 Installing the appliance on a base or on a wooden joist ceiling ã Warning! Washing machine may be damaged!! The washing machine may wander during the spin cycle and topple/fall off the base.
- Page 58 Remove transportation protection devices ã Caution! Washing machine may be damaged! Transit bolts which have not been removed may damage e.g. the drum while the washing machine is running. Before using the appliance for the first time, remove the 4 transportation protection devices completely and keep in a safe place.
- Page 59 Loosen and remove all 4 transportation lock screws. Take the power cord out of the holders. Remove sleeves. Insert covers. Lock covers firmly by pressing on the locking hook. ²...
- Page 60 Connecting the water ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. Do not immerse Aqua-Stop safety device in water (contains an electric valve). – To prevent leakage or water damage, follow the instructions ²...
- Page 61 on the appliance: for Standard and Aqua-Secure models Carefully turn on the tap and check that the connection points are not leaking. Screw connection is under water pipe pressure. ² Water drainage hose – Do not kink or protract the the water supply hose. ²...
- Page 62 Drainage into a siphon ã Warning! Water damage possible! If the drainage hose slips off the siphon connection due to high water pressure when draining the washing machine, leaking water may cause damage. Connection point must be secured with hose clip, Ø...
- Page 63 Alignment Loosen lock nut in a clockwise direction with a wrench. Check alignment of the washing machine with a spirit level and, if required, correct. Adjust the height by rotating the foot. All four feet must be firmly on the floor. ²...
- Page 64 Electrical connection Electrical safety ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. –...
- Page 65 Before the 1st washing The washing machine was inspected thoroughly before leaving the factory. To remove any water left over from testing procedures, the first washing cycle should be carried out without laundry in the machine. The washing machine must have been installed and connected ²...
- Page 66 Transportation, e.g. if moving house Preparatory work Turn off the tap. Release the water pressure in the supply hose. Maintenance – Filter in the water inlet hose ~ Page 46 Drain any residual detergent solution. Maintenance – Drain pump blocked Page 45 Isolate the washing machine from the power supply.
- Page 67 Index Alignment, 63 Aqua-Sensor, 41 Anti-stain system, 33 Automatic programmes, 28 Basic Settings 3 sec., 11 Options, 11, 17 Button speedPerfect, 11, 16, 30 ecoPerfect, 11, 16, 30 Spin, 11, 16, 30 Finish in, 11, 16, 30 Start/Pause, 11 Temperature, 11, 16, 30 i-Dos , 11, 17, 31 ô...
- Page 68 i-Dos, 10, 23, 31 Information on the display panel, 49 Clean the dispenser, 43 Insert Drain dispensers, 43 the laundry, 15 Filling dispenser, 34 the washing, 14 In daily use, 35 Installation, 55 Standard settings, 36 Installing transportation Switching on the appliance, 34 protection devices, 66 Intended use, 4...
- Page 69 Technical specifications, 54 washing, 20 Temperature, 11, 16, 30 Transport bolts, 58 Topping up Unbalanced load detection Unloading system, 41 the laundry, 22 Washing Water Plus, 32 Insert laundry, 13...
- Page 72 3 pence per minute. 01450 2655 0.03 € per minute at peak. Off peak 0.0088 € per minute. Please find the contact data of all countries in the enclosed customer service list. Siemens-Electrogeräte GmbH Carl-Wery-Str. 34, 81739 München Germany 9000895673 (9306)