Related Manuals for Siemens WM14Y740EE
Summary of Contents for Siemens WM14Y740EE
- Page 1 Instruction Manual and Installation Instructions WM14Y740EE WM14Y74XEE Washing machine www.siemens-home.com...
- Page 2 Please take a couple of minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands of the Siemens brand, each washing machine, which leaves our factory, is inspected thoroughly to ensure that it functions properly and is in perfect condition.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t io n Ma n u a l a n d I n s t alla t io n In s t r u c t i o n s Before washing Ø... -
Page 4: Ø Intended Use
Intended use B e f o r e wa s h i n g Ø For use in the household only. Ø The washing machine is suitable for washing machine- washable textiles and hand-washable wool in wash liquor. Ø The washing machine is suitable to be operated with cold drinking water and commercially available detergents and care products which are suitable for use in washing machines. -
Page 5: Ø Safety Instructions
Safety instructions ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. Warning! ã... - Page 6 – When washing at high temperatures, the glass of the washing machine door becomes hot. Prevent children from touching the hot washing machine door. – Detergents and care products may cause intoxication if consumed or eye and skin irritation if touched.
- Page 7 ã Caution! Risk of damaging appliance! – Cover plate may break! Do not climb on the washing machine. – Opened washing machine door may break off or washing machine may overturn! Do not lean on the open washing machine door. ã...
-
Page 8: Ø Protection Of The Environment
Protection of the environment Packaging/Old appliance Dispose of packaging in an environmentally friendly manner. This appliance has been identified in accordance with the European Directive 2002/96/EG on Waste Electrical and Electronic Equipment (WEEE). The Directive specifies the framework for an EU-wide valid return and recycling of waste appliances. -
Page 9: Ø Getting To Know Your Appliance
Getting to know your appliance 2SHUDWLQJ HOHPHQWV 'HWHUJHQW GUDZHU 'LVSOD\ HOHPHQWV 'UXP OLJKW GHSHQGLQJ RQ PRGHO 'RRU 6HUYLFH IODS FODFN 2SHQLQJ DQG FORVLQJ WKH GRRU 6HUYLFH IODS... -
Page 10: Ø Detergent Drawer
Detergent drawer Dispenser I Detergent for prewash Softener, starch. Do not exceed the maximum load. Dispenser Dispenser II Detergent for main wash, water softener, bleach, stain remover Dispenser A for dosing liquid detergent (not for all models) For models with insert for liquid detergent: ²... -
Page 11: Ø Operating Elements/Display Elements
Operating elements/Display elements ² All buttons are sensitive, they only need to be touched gently. Switch on and off the appliance. Press Start wash programme. Select Inicio/ Ü main switch button. Carga (Start/Pause) button to start, interrupt and cancel the programme (e.g. Select a programme. -
Page 12: The Main Points In Brief
The main points in brief Insert mains plug. Open the washing To switch on, press Select the pro- Turn the tap on. machine door. gramme, e.g. button. Algodón (Cottons). ú Dosage: 30% Please load laundry: max. 8kg Sort the washing. Insert the washing. -
Page 13: Ø Before Each Washing
Before each washing Op e r a t i n g t h e a p p l i a n c e ² – Install and connect washing machine properly. Refer to ~ Page 45 – Before the 1st wash, wash once without any washing. ~ Page 58 1. - Page 14 Otherwise, the load display may malfunction. ~ Page 33 Press the button. The appliance is switched on. The Siemens logo is indicated on the display panel and all programme indicator lamps are lit. Then always the Algodón (Cottons) programme preset at the factory is displayed.
- Page 15 – For appliances with drum light: After switching on the appliance, after opening and closing the washing machine door as well as after starting the programme, the drum is lit. The light goes out automatically. Select a programme. You can use the saved programme or select another programme, Programme Overview, refer to ~ Page 23, or select other programmes (see...
- Page 16 – Do not load washing until the main menu for the saved programme is displayed after the Siemens logo. – The load bar progresses as the washing machine is loaded. If the max. load is exceeded, the bar flashes. Do not exceed indicated max.
- Page 17 You can use the displayed presettings or adjust the selected programme optimally to the items of washing by changing the presettings or selecting additional settings/options. Ø Changing the °C (Temperature), (Spin), Terminado en/em (Finish in). Refer to ~ Page 28: e.g.
- Page 18 ã Select Antimanchas/Nodoas (ASR Stain Automatic) button and select e.g. grass: μ 60°C 2:31h 1400 soil + sand ã μ è Stains grass coffee Main menu – Select/deselect stain using displayed buttons. Stain option is immediately active and is indicated on the display panel.
-
Page 19: Ø Washing
Washing During the wash cycle the programme progress is indicated by a bar on the display panel. The bar progresses in the course of the wash cycle and provides information about the current programme progress. The arrows are switched on and off according to the programme progress. - Page 20 If the programme selector is adjusted or a button is selected while the childproof lock is active, the symbol flashes briefly. Ø Topping up washing When the programme has started, washing can be reloaded or taken out as required. Ü Select Inicio/Carga (Start/Pause).
- Page 21 Ø End of programme by Rinse Hold Rinse hold reached: Select "spin" or "drain" and then "start". Spin Drain 1. Select Spin (If required, adjust the spin speed) or Drain. Ü 2. Select Inicio/Carga (Start/Pause). End of the programme Finished, remove washing is indicated on the display panel. Finished, remove washing If Foam has been detected is also indicated on the display panel, the washing machine has detected too much foam during the...
-
Page 22: Ø After Washing
After washing Open washing machine door and remove washing.. ú Remove the washing. Switch off the device. ² – Do not leave any items of washing in the drum. In the next wash they may shrink or discolour something else. –... -
Page 23: Ø Programme Overview
Programme overview The presettings of the pro- grammes are highlighted in bold. Programme/Type of washing Options/information Name of the programme max. load Õ Brief explanation of the programme and selectable temperature as °C for which textiles it is suitable. selectable spin speeds in rpm, the max. - Page 24 The presettings of the pro- grammes are highlighted in bold. Programme/Type of washing Options/information max. 2 kg Lana (Wool) Hand or machine-washable wool or rich- cold – 30 – 40 °C wool textiles. 0 ... 800 rpm Especially gentle wash programme to ç...
- Page 25 The presettings of the pro- grammes are highlighted in bold. Programme/Type of washing Options/information Microfibras + impreg. max. 1 kg (Outdoor/Waterproofing) cold – 30 – 40 °C Washing followed by impregnation of 0 ... 800 rpm weatherproof and outdoor clothing with membrane coating and water-resistant ¦...
- Page 26 ... more programmes The presettings of the pro- grammes are highlighted in bold. Programme/Type of washing Options/information Outdoor max. 2 kg Weatherproof and outdoor clothing with a cold - 30 – 40 °C membrane coating and water-resistant 0 ... 800 rpm ²...
- Page 27 Memory 1 and 2 The programme and all settings are permanently stored under Memoria (Memory) 1 and Memoria (Memory) 2. Saving: Select Memoria (Memory) 1 or 2 programme. If a programme has not yet been selected for this memory programme, select programme according to the instructions on the display panel.
-
Page 28: Ø Programme Settings/Options
Programme settings/options Depending on the programme, you can use the programme options to adjust the washing process even more efficiently to your items of washing. ² – Are active without acknowledgement. – Not retained after appliance is switched off. – Can be selected or deselected or changed depending on the programme progress. - Page 29 ß Notes Press Menu (Options) button to select: Pre-wash For heavily soiled washing. on – off Pour detergent into dispensers I and II. Less Ironing Reduces creasing by special spin sequence followed ² on – off by fluffing and reduced spin speed. Residual moisture of the washing slightly in- creased.
-
Page 30: Ø Anti-Stain System
ASR Stain Automatic General information about stains A total of 16 different stains can be selected. The washing machine adjusts the washing temperature, drum movement and soaking time specific to the type of stain. Hot or cold water, gentle or intensive washing control and long or short soaking provide the wash programme with a special sequence for each type of stain. -
Page 31: Ø Consumption Values
Consumption values Programme Load Energy Water *** Programme consumption *** duration *** Algodón (Cottons) 30 °C * 8 kg 0.38 kWh 57 l 2:21 h Algodón (Cottons) 40 °C * 8 kg 0.97 kWh 57 l 2:31 h Algodón (Cottons) 60 °C * 8 kg 1.31 kWh 57 l... -
Page 32: Ø Appliance Settings
Appliance settings By pressing the Ajustes base 3s. (Basic Settings 3 sec.) buttons, appliance settings can be changed, e.g. button signal. Simultaneously hold down Ajustes base 3s. (Basic Settings 3 sec.) buttons for approx. 3 seconds: Language è end signal button signal Ø... -
Page 33: Sensors - Your Washing Machine Is So Intelligent
Sensors – Your washing machine is so intelligent Load adjust Depending on the type of textile and load, the load adjust optimally adjusts the water consumption in each programme. Aqua-Sensor depending on model During the rinse cycle the Aqua sensor checks the degree of turbidity (turbidity is caused by dirt and detergent residue) of the rinsing water. -
Page 34: Ø Care And Maintenance
Care and maintenance C l e a n i n g a n d m a i n t e n a n c e ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. Switch off the appliance. - Page 35 Descaling Not required if detergent dosed correctly. However, if this does occur, follow the instructions of the descaling agent manufacturer. Suitable descalers can be purchased on our website or from customer service. ~ Page 42 Cleaning the detergent drawer If it contains detergent or fabric softener residue: Pull out, depress insert, take out drawer all the way.
- Page 36 Take the drainage hose out of the holder. Remove sealing cap, allow detergent solution to flow out. Have a suitable container ready. Push up the closing cap and place the drain hose back in its holder. Note: Residual water may run out. Carefully unscrew the pump cover.
- Page 37 Filter blocked in water inlet hose First, release water pressure in the supply hose: Turn off the tap! Select any programme (except Spin/Drain). Select Inicio/Carga Ü (Start/Pause). Leave programme for approx. 40 seconds. Press the button. Appliance is switched off. Pull out the mains plug! Clean the filter: Disconnect the hose from the water tap.
-
Page 38: Ø Emergency Lock Release, E.g. If Power Failure Occurs
Emergency lock release, e.g. if power failure occurs The programme continues running when the power supply is restored. If the washing is still to be removed, the door can be opened as described below: Warning! ã Danger of scalding! Wash liquor and washing may be hot. If touched, there is a risk of scalding. -
Page 39: Ø Information On The Display Panel
Information on the display panel Display Cause/Remedy The door cannot be – Washing may be caught. Please open and close washing ma- chine door again and select Inicio/Carga Ü (Start/Pause). locked, please open the door again, then – If required, shut washing machine door or remove washing and close it and select shut again. -
Page 40: Ø Faults, What To Do
Faults, what to do? Faults Cause/Remedy Water is running out. – Correctly attach/replace drainage hose. – Tighten screw-fitting on the supply hose. – Inicio/Carga Ü (Start/Pause) not selected? Water not flowing in. Detergent not – Tap not open? – Filter blocked? Clean the filter. ~ Page 37 washed in. - Page 41 Faults Cause/Remedy Display panel/indi- – Power failure? cator lights do not – Fuse tripped? Switch on/replace fuse. – If the fault occurs repeatedly, call customer service. ~ Page 42 function while the appliance is running. The programme – Not a fault – unbalanced load detection system adjusts imbal- takes longer than ance by repeatedly distributing the washing.
-
Page 42: Customer Service
Customer service If you cannot rectify the fault yourself, Faults, what to do? ~ Page 40, please contact our customer service. We will always finds a suitable solution to avoid unnecessary visits by technicians. Please give customer service the product number (E-Nr.) and the production number (FD) of the appliance. -
Page 43: Ø Standard Accessories
Standard accessories In s t a l l i n g t h e ap p l i a n c e GHSHQGLQJ RQ PRGHO $TXD6WRS 6WDQGDUG$TXD6HFXUH 0DLQV FDEOH :DWHU RXWOHW :DWHU LQOHW ,QVWUXFWLRQ PDQXDO DQG ,QVWDOODWLRQ LQVWUXFWLRQV &RYHUV ZLWK KRVH FOLS (OERZ IRU VHFXULQJ WKH ZDWHU RXWOHW KRVH... - Page 44 Hose and cable lengths GHSHQGLQJ RQ PRGHO &RQQHFWLRQ RQ OHIW VLGH &RQQHFWLRQ RQ ULJKW VLGH a FP a FP a FP a FP PD[ a FP a FP FP a FP a FP ² If the hose holders are used, the possible hose lengths are reduced! Available from dealer/customer service: Ø...
-
Page 45: Ø Installation
Installation ² Humidity in the drum is caused by the final inspection. Secure installation ã Warning! Risk of injury! – The washing machine is heavy – caution: take care when lifting it. – If the washing machine is raised by protruding components (e.g. - Page 46 ã Caution! Washing machine may be damaged! – Frozen hoses may tear/burst. Do not install the washing machine in an area where there is a risk of frost or outdoors. – If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and the washing machine may be damaged.
- Page 47 ã Caution! Risk of stumbling! If the hoses and power cord are installed incorrectly, there is a risk of tripping and injury. Lay hoses and cables in such a way that there is no risk of stumbling. ã Caution! Washing machine may be damaged! –...
- Page 48 Installation area ² Stability is important to prevent the washing machine from wandering! – The installation area must be firm and level. – Soft floors/floor coverings are not suitable. Installing the appliance on a base or on a wooden joist ceiling ã...
-
Page 49: Ø Remove Transportation Protection Devices
Remove transportation protection devices Caution! ã Washing machine may be damaged! Transit bolts which have not been removed may damage e.g. the drum while the washing machine is running. Before using the appliance for the first time, remove the 4 transportation protection devices completely and keep in a safe place. - Page 50 Take hoses out of the elbow and remove elbow. Loosen and remove all 4 transportation lock screws. Take the power cord out of the holders. Remove sleeves. Prepare/separate cover. Insert covers. ² Lock covers firmly by pressing on the locking hook. Insert hose holder.
-
Page 51: Ø Connecting The Water
Connecting the water ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. Do not immerse Aqua-Stop safety device in water (contains an electric valve). ² – To prevent leakage or water damage, follow the instructions in this chapter! –... - Page 52 to the tap (¾" = 26.4 mm): ƒ ƒ PLQ PP Aqua-Stop and Aqua-Secure Standard on the appliance: for Standard and Aqua-Secure models Carefully turn on the tap and check that the connection points are not leaking. ² Screw connection is under water pipe pressure.
- Page 53 – The plug must not be in the plug hole. – When the water is being pumped out of the washing machine, check that the water drains away quickly enough. – The end of the drainage hose must not be immersed in the drained water! Installing the drainage hose: Drainage into a siphon Warning!
- Page 54 Drainage into a plastic pipe with rubber sleeve or into a gully: Warning! ã Water damage possible! If the drainage hose slips off the plastic pipe due to high water pressure when draining the washing machine, leaking water may cause damage. Secure the drainage hose to prevent it from slipping out of the sink.
-
Page 55: Ø Alignment
Alignment Loosen lock nut in a clockwise direction with a wrench. Check alignment of the washing machine with a spirit level and, if required, correct. Adjust the height by rotating the foot. ² All four feet must be firmly on the floor. The washing machine must not wobble! Tighten the lock nut against the housing. -
Page 56: Ø Electrical Connection
Electrical connection Electrical safety ã Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. - Page 57 Ensure that: – Mains plug and socket match fit. – Cable cross-section is adequate. – Earthing system has been installed correctly. – A damaged power cord may be replaced by an electrician only. A replacement mains cable can be obtained from customer service. –...
-
Page 58: Ø Before The 1St Washing
Before the 1st washing The washing machine was inspected thoroughly before leaving the factory. To remove any water left over from testing procedures, the first washing cycle should be carried out without laundry in the machine. ² The washing machine must have been installed and connected properly. -
Page 59: Transportation, E.g. If Moving House
Transportation, e.g. if moving house Preparatory work Turn off the tap. Release the water pressure in the supply hose. Maintenance – Filter in the water inlet hose ~ Page 37 Drain any residual detergent solution. Maintenance – Drain pump blocked ~ Page 35 Isolate the washing machine from the power supply. -
Page 60: Index
Index Alignment, 55 ASR Stain Automatic, 11, 17, 28, 30 Aqua-Sensor, 33 Basic Settings 3 sec., 11 Finish in, 11, 17, 28 Button Options, 11, 18 ASR Stain speedPerfect, 11, 17, 28 Automatic, 11, 17, 28 Spin, 11, 17, 28 Basic Settings 3 sec., 11 Start/Pause, 11 ecoPerfect, 11, 17, 28... - Page 61 Hints and tips, 8 Hose and cable lengths, 44 Information on the display Installation, 45 panel, 39 Installing transportation Inserting the laundry, 16 protection devices, 59 Insert the laundry, 14 Intended use, 4 Insert the washing, 15 Less Ironing, 29 Load sensor/Load display, 33 Load adjust, 33 Maintenance, 34...
- Page 62 Unbalanced load detection Unloading system, 33 the laundry, 22 Water Plus, 29...
- Page 64 Calls from a BT landline will be charged at up to 3 pence per minute. 01450 2655 Please find the contact data of all countries in the enclosed customer service list. Siemens-Electrogeräte GmbH Carl-Wery-Str. 34, 81739 München Germany 9000731667 (9203)