Related Manuals for Siemens WM14Y591GB
Summary of Contents for Siemens WM14Y591GB
- Page 1 Washing machine Washing machine Washing machine WM14Y591GB, WM16Y591GB siemens-home.com/welcome Register your product online...
-
Page 2: Your New Washing Machine
Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Siemens, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition. -
Page 3: Table Of Contents
Contents e n W a s h i n g m a c h i n e I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Before washing Intended use... -
Page 4: Intended Use
Intended use B e f o r e w a s h i n g For use in the household only. Ø The washing machine is suitable for washing machine- Ø washable textiles and hand-washable wool in wash liquor. The washing machine is suitable to be operated with cold Ø... -
Page 5: Safety Instructions
Safety instructions Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. Warning! Risk to children! –... - Page 6 Caution! Danger of scalding! When washing at high temperatures, you may be scalded if you touch the hot wash liquor (e.g. if draining hot wash liquor into a washbasin or if draining the washing machine in an emergency). Allow detergent solution to cool down. Caution! Risk of damaging appliance! –...
-
Page 7: Protection Of The Environment
Protection of the environment Packaging/Old appliance Dispose of packaging in an environmentally friendly manner. This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU. -
Page 8: The Main Points In Brief
The main points in brief Insert mains plug. Open the washing To switch on, press Select the Turn the tap on. machine door. programme, e.g. button. Cotton. Sort the washing. Sort the washing. Sort the washing. Insert the washing. Insert the washing. Insert the washing. -
Page 9: Getting To Know Your Appliance
Getting to know your appliance... -
Page 10: Detergent Drawer
Detergent drawer Dispenser I Detergent for prewash Detergent for prewash Detergent for prewash Softener, starch. Do not exceed the maximum load. Softener, starch. Do not exceed the maximum load. Softener, starch. Do not exceed the maximum load. Dispenser Dispenser II Detergent for main wash, water softener, bleach, stain Detergent for main wash, water softener, bleach, stain Detergent for main wash, water softener, bleach, stain... -
Page 11: Operating Elements/Display Elements
Operating elements/Display elements ² All buttons are sensitive, they only need to be touched gently. All buttons are sensitive, they only need to be touched gently. All buttons are sensitive, they only need to be touched gently. Press the main switch button. -
Page 12: Before Each Washing
Before each washing O p e r a t i n g t h e a p p l i a n c e – Install and connect washing machine properly. Refer ² to ~ Page 42 – Before the 1st wash, wash once without any washing. ~ Page 52 1. -
Page 13: Preparing The Appliance
2. Preparing the appliance Insert mains plug. Turn on water tap. 3. Selecting programme and loading laundry in the drum Open the washing machine door. Check whether the drum has been completely emptied. If Check whether the drum has been completely emptied. If Check whether the drum has been completely emptied. - Page 14 Select the programme. You can use the displayed programme or select another programme. Programme overview, refer to ~ Page 22 Insert laundry The load screen for the selected programme (e.g. for Cotton) is indicated on the display panel. The load screen is indicated when the door is opened or when the amount of washing when the door is opened or when the amount of washing when the door is opened or when the amount of washing...
- Page 15 = 60 % = 75 % = 100 % – Soiling, – Water hardness (depending on model can be determined using enclosed water hardness strip or is available from your water utility company). – Manufacturer’s instructions. – When dosing all detergents, cleaning aids, cleaning products ²...
- Page 16 Change presettings for temperature, spin speed, finished in Ø time; , E.g. select and change Temp. °C buttons – and +: The settings are active without acknowledgement and are displayed in the main menu. – If the buttons are held down, the set values automatically run ²...
-
Page 17: Starting The Programme
Other settings can be selected depending on the model, e.g. Rinse Hold button: When selected, the button indicator lamp is lit and a corresponding symbol is indicated on the display panel: Button Less Ironing – Button Prewash – Button Extra Rinse – (Rinse cycles) Ë... -
Page 18: Washing
Washing Programme sequence While the programme is running, the programme progress is indicated on the display panel via corresponding symbols and a progress bar. The bar progresses in the course of the wash cycles. The combined symbol indicates the following programme indicates the following programme indicates the following programme Æ... - Page 19 The activated childproof lock is indicated on the display panel by the symbol If the programme selector is adjusted or a button is selected while the childproof lock is active, the symbol flashes briefly. Ø Topping up laundry When the programme has started, washing can be reloaded or taken out as required.
-
Page 20: End Of The Programme
. Programme stops Ø End of programme by Rinse Hold in the last rinse cycle. – Select Start/Reload . The programme continues with Ü the drain and spin cycles (if required change spin speed). – If only the drain cycle, but not the spin cycle, is required, select and start the Empty programme. -
Page 21: After Washing
After washing Open washing machine door and remove washing. – Do not leave any items of washing in the drum. In the next ² wash they may shrink or discolour something else. – Remove any foreign objects from the drum and the rubber –... -
Page 22: Programme Overview
Programme overview The presettings of the programmes are highlighted in bold. Programme/Type of washing Settings/Information max. load Name of the programme Brief explanation of the programme and selectable temperature as °C for which textiles it is suitable. selectable spin speeds in rpm, the max. - Page 23 The presettings of the programmes are highlighted in bold. Programme/Type of washing Settings/Information max. 2 kg Delicates/Silk For delicate, washable textiles, e.g. made cold - 30 - 40 °C of silk, satin, synthetic fibres or blended 0 ... 600 ... 800 rpm fabrics (e.g.
- Page 24 The presettings of the programmes are highlighted in bold. Programme/Type of washing Settings/Information Empty the rinsing water, e.g. after Flot (Rinse Hold) (without final spin cycle). max. 3,5 kg Dark Wash Dark textiles made of cotton and dark cold - 30 - 40 °C easy-care textiles.
- Page 25 The presettings of the programmes are highlighted in bold. Programme/Type of washing Settings/Information max. 1 kg Textile Guard Washing followed by water proofing cold - 30 - 40 °C of weatherproof and outdoor clothing with 0 ... 800 rpm membrane coating and water-resistant textiles.
-
Page 26: Programme Settings
Programme settings Depending on the programme, you can use the programme settings to adjust the washing process even more efficiently to your items of washing. Programme settings: – are active without acknowledgement. ² – not retained after appliance is switched off. –... - Page 27 Buttons Notes For heavily soiled washing. Prewash Pour detergent into dispensers I and II. Additional rinse cycles depending on the Extra Rinse programme, prolonged programme duration. + 1 Rinse « + 2 Rinses « ² . Recommended application: for particularly + 3 Rinses «...
-
Page 28: Consumption Values
Consumption values Programme Load Energy Water ** Programme consumption ** duration ** Cotton 20 °C 8 kg 0,25 kWh 57 l Cotton 40 °C 8 kg 1,09 kWh 57 l Cotton 60 °C 8 kg 1,43 kWh 57 l Cotton 90 °C 8 kg 2,40 kWh 69 l... -
Page 29: Appliance Settings
Appliance settings The Basic Settings 3 sec. buttons (Spin + and Finished in +) can be used to change the set values of the appliance settings, e.g. the volume of the button signals. Simultaneously hold down Basic Settings 3sec. buttons for approx. -
Page 30: Sensors - Your Washing Machine Is So Intelligent
Sensors – Your washing machine is so intelligent Load adjust Depending on the type of textile and load, the load adjust optimally adjusts the water consumption in each programme. Aqua-Sensor depending on model During the rinse cycle the Aqua sensor checks the degree of turbidity (turbidity is caused by dirt and detergent residue) of the rinsing water. -
Page 31: Care And Maintenance
Care and maintenance C l e a n i n g a n d m a i n t e n a n c e Warning! Danger of death from electric shock! Danger of death if live parts are touched. Switch off the appliance. -
Page 32: Cleaning The Detergent Drawer
Cleaning the detergent drawer If it contains detergent or fabric softener residue: Pull out, depress insert, take out drawer all the way. Take out insert: using your finger, press insert upwards. Clean detergent dispenser and insert with water and a brush and dry. - Page 33 Take the drainage hose out of the holder. Remove the sealing cap, drain water into a suitable receptacle. Press on sealing cap and insert drainage hose into the holder. Note: Residual water may run out. Carefully unscrew the pump cover. Clean the interior, pump cover thread and pump housing (fan impeller in the detergent-solution pump must rotate).
-
Page 34: Filter Blocked In Water Inlet Hose
Filter blocked in water inlet hose First, release water pressure in the supply hose: Turn off the tap! Select any programme (except Spin/Drain). Select Start/Reload . Leave programme for approx. 40 Ü seconds. Press the button. Appliance is switched off. Pull out the mains plug! Clean the filter: Disconnect the hose from the water tap. -
Page 35: Emergency Release
Emergency release The programme continues running when the power supply is restored. If the washing is still to be removed, the door can be opened as described below: Warning! Danger of scalding! Wash liquor and washing may be hot. If touched, there is a risk of scalding. -
Page 36: Information On The Display Panel
Information on the display panel Display Cause/Remedy CLOSE – Washing may be caught. Please open and close washing DOOR machine door again and select Start/Reload Ü – If required, shut washing machine door or remove washing and shut again. – If required, switch appliance off and on again; set programme and make individual settings;... -
Page 37: Faults, What To Do
Faults, what to do? Faults Cause/Remedy Water is running out. – Correctly attach/replace drainage hose. – Tighten screw-fitting on the supply hose. Water not flowing in. – Start/Reload not selected? Ü Detergent not – Tap not open? washed in. – Filter blocked? Clean the filter. ~ Page 34 –... - Page 38 Faults Cause/Remedy Display panel/ – Power failure? indicator lights do – Fuse tripped? Switch on/replace fuse. not function while – If the fault occurs repeatedly, call customer service. ~ Page 39 the appliance is running. The programme – Not a fault – unbalanced load detection system adjusts takes longer than imbalance by repeatedly distributing the washing.
-
Page 39: Customer Service
Customer service If you cannot rectify the fault yourself, Faults, what to do? ~ Page 37, please contact our customer service. We will always finds a suitable solution to avoid unnecessary visits by technicians. Please give customer service the product number (E-Nr.) and the production number (FD) of the appliance. -
Page 40: Standard Accessories
Standard accessories I n s t a l l i n g t h e a p p l i a n c e Also required for connection of the water drainage hose to a Also required for connection of the water drainage hose to a Also required for connection of the water drainage hose to a siphon: siphon:... -
Page 41: Hose And Cable Lengths
Hose and cable lengths If the hose holders are used, the possible hose lengths are If the hose holders are used, the possible hose lengths are If the hose holders are used, the possible hose lengths are ² reduced! Available from dealer/customer service: Available from dealer/customer service: Available from dealer/customer service: Extension for Aqua-Stop or cold water inlet hose... -
Page 42: Installation
Installation Humidity in the drum is caused by the final inspection. ² Secure installation Warning! Risk of injury! – The washing machine is heavy – caution: take care when lifting it. – If the washing machine is raised by protruding –... -
Page 43: Installation Area
Warning! Risk of injury! – The washing machine is heavy – caution: take care when lifting it. – If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and cause injuries. Do not lift the washing machine by its projecting parts. - Page 44 Installing the appliance on a base or on a wooden joist ceiling Warning! Washing machine may be damaged!! The washing machine may wander during the spin cycle and topple/fall off the base. Always secure the washing machine feet with fixing brackets.
-
Page 45: Remove Transportation Protection Devices
Remove transportation protection devices Caution! Washing machine may be damaged! Transit bolts which have not been removed may damage e.g. the drum while the washing machine is running. Before using the appliance for the first time, remove the 4 transportation protection devices completely and keep in a safe place. - Page 46 Loosen and remove all 4 transportation lock screws. Take the power cord out of the holders. Remove sleeves. Insert covers. Lock covers firmly by pressing on the locking hook. Lock covers firmly by pressing on the locking hook. Lock covers firmly by pressing on the locking hook. ²...
-
Page 47: Connecting The Water
Connecting the water Warning! Danger of death from electric shock! Danger of death if live parts are touched. Do not immerse Aqua-Stop safety device in water (contains an electric valve). – To prevent leakage or water damage, follow the instructions ²... - Page 48 on the appliance: for Standard and Aqua-Secure models Carefully turn on the tap and check that the connection points are not leaking. Screw connection is under water pipe pressure. ² Water drainage hose – Do not kink or protract the the water supply hose. ²...
- Page 49 Drainage into a siphon Warning! Water damage possible! If the drainage hose slips off the siphon connection due to high water pressure when draining the washing machine, leaking water may cause damage. Connection point must be secured with hose clip, Ø...
-
Page 50: Alignment
Alignment Loosen lock nut in a clockwise direction with a wrench. Check alignment of the washing machine with a spirit level and, if required, correct. Adjust the height by rotating the foot. All four feet must be firmly on the floor. All four feet must be firmly on the floor. -
Page 51: Electrical Connection
Electrical connection Electrical safety Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. –... -
Page 52: Before The 1St Washing
Before the 1st washing The washing machine was inspected thoroughly before leaving the factory. To remove any water left over from testing procedures, the first washing cycle should be carried out without laundry in the machine. The washing machine must have been installed and connected ²... -
Page 53: Transportation, E.g. If Moving House
Transportation, e.g. if moving house Preparatory work Turn off the tap. Release the water pressure in the supply hose. Maintenance – Filter in the water inlet hose ~ Page 34 Drain any residual detergent solution. Maintenance – Drain pump blocked ~ Page 32 Isolate the washing machine from the power supply. -
Page 54: Index
Index Alignment, 50 Aqua-Sensor, 30 Basic Settings 3 sec., 11, 29 Rinse Hold, 11, 17, 27 Button speedPerfect , 11, 16, ecoPerfect , 11, 16, 26 ¦ Spin, 11, 16, 26 Extra Rinse, 11, 17, 27 Start/Reload, 11 Finish in, 11, 16, 26 Temperature, 11, 16, 26 Less Ironing, 11, 17, 26 Prewash, 11, 17, 27... - Page 55 Information on the display Installation, 42 panel, 36 Installing transportation Inserting protection devices, 53 the laundry, 13, 14, 15 Intended use, 4 Less Ironing, 11, 17, 26 Load sensor/Load display, 30 Load adjust, 30 Maintenance, 31 Old appliance, 7 Packaging, 7 Programme sequence, 18 Programme sequence, 18 Programme sequence, 18...
- Page 56 Please find the contact data of all countries in the enclosed customer service list. Please find the contact data of all countries in the enclosed customer service list. Please find the contact data of all countries in the enclosed customer service list. Siemens-Electrogeräte GmbH Carl-Wery-Straße 34, 81739 München siemens-home.com...