Summer Compensation -- (Lower) Starting Temperature For Summer Compensation (°C); Summer Compensation - Offset Of The Set-Point Temperature For The Entry Into Summer Compensation (X 0.1°C); Summer Compensation - (Upper) Exit Temperature For Summer Compensation (°C) - ABB SmartTouch i-bus KNX Product Manual
Table of Contents
Advertisement
10.24.94 Summer compensation -— (Lower) Starting temperature for summer compensation (°C)
Options:
The parameter defines the lower outside temperature value up to which temperature value the
setpoint correction (summer compensation) is performed based on too high an outside
temperature.
Note
This parameter is only available if the "Summer compensation" parameter is set
to "Yes".
10.24.95 Summer compensation — Offset of the set-point temperature for the entry into summer
compensation (x 0.1°C)
Options:
The parameter is used to define how many degrees Kelvin the setpoint value will be increased
by during summer compensation when the lower temperature value is reached.
Typical values for summer compensation are:
20°C: Lower outside temperature value
■
32°C: Upper outside temperature value
■
0 K: Lower setpoint offset
■
4 K: Upper setpoint offset
■
That means that a flowing setpoint increase of 0 to 4 K occurs if the outside temperature
increases from 20°C to 32°C.
Note
This parameter is only available if the "Summer compensation" parameter is set
to "Yes".
10.24.96 Summer compensation — (Upper) exit temperature for summer compensation (°C)
Options:
The parameter defines the upper outside temperature value up to which temperature value the
setpoint correction (summer compensation) is performed based on too high an outside
temperature.
Note
This parameter is only available if the "Summer compensation" parameter is set
to "Yes".
Product manual 2CKA00xx73xxxxx
KNX control elements and application parameters
Setting option between -127 - 127
Setting option between -127 - 127
Setting option between -127 - 127
Application "Internal RTC"
│245
Advertisement
Table of Contents
