Cisco IE 3000 Getting Started Manual page 7

Cisco systems switch user manual

Hide thumbs Also See for IE 3000:

Table of Contents

Cisco IE 3000 Switch Getting Started Guide

Step 6

Connect a Category 5 Ethernet cable (not

provided) from the blinking switch port to the

Ethernet port on your PC.

The port LEDs on your PC and the switch

blink green while the switch configures the

connection.

Step 7

When the Setup LED turns solid green, start a browser session on the PC.

Step 8

The Express Setup window automatically appears. If the window does not appear, verify that

any proxy settings or pop-up blockers are disabled on your browser and that any wireless

client is disabled on your PC. You might also need to enter a URL in your browser, such as

Cisco.com or another well-known website. If you need help, see the

section on page

If the switch has been previously configured, the device manager page appears. You

Note

can use it to change the switch IP address.

OL-16234-01

25.

"In Case of Difficulty"

Cisco IE 3000 Switch Getting Started Guide

Table of Contents

Show Quick Links

Chapters

Table of Contents