Produktinfo Circulating-air mode ................5 Operating the appliance ............6 Additional information on products, accessories, replacement Setting the fan ..................6 parts and services can be found at www.siemens-home.bsh- Lighting ....................6 group.com and in the online shop www.siemens-home.bsh- group.com/eshops Cleaning and maintenance ............6 : Important safety information Read these instructions carefully.
Page 4
Adequate incoming air must therefore When gas burners are in operation without ■ ■ always be ensured. any cookware placed on them, they can build up a lot of heat. A ventilation An incoming/exhaust air wall box alone ■ appliance installed above the cooker may will not ensure compliance with the limit.
Causes of damage Caution! Risk of damage due to corrosion. Always switch on the appliance while cooking to avoid condensation. Condensate can produce corrosion damage. Risk of damage due to ingress of humidity into the electronic circuitry. Never clean operator controls with a wet cloth. Surface damage due to incorrect cleaning.
Operating the appliance These instructions apply to several appliance variants. It is 2 Fan possible that individual features are described which do not apply to your appliance. Switches off the fan Note: Switch on the extractor hood when you start cooking and Switches on fan speed 1 switch it off again several minutes after you have finished Switches on fan speed 2...
Page 7
Removing the fleece grease filter Fitting the fleece grease filter Trim the new fleece grease filter to the required size and Risk of fire! place it in the filter grid. Grease deposits in the grease filter may catch fire. Clamp the fleece grease filter in place with the wires. Replace the grease filter at least every two months.
Trouble shooting Replacing the LED lights Malfunctions often have simple explanations. Please read the following notes before calling the after-sales service. Risk of electric shock! Risk of electric shock! When changing the bulbs, the bulb socket contacts are live. Incorrect repairs are dangerous. Repairs may only be carried Before changing the bulb, unplug the appliance from the mains out and damaged power cables replaced by one of our trained or switch off the circuit breaker in the fuse box.