BaByliss ST298E-C180a - Quartz, Ceramic Starightener Manual

Read the safety instructions first.

HOW TO USE

Hot surface! When in use, the appliance must never come into contact with the scalp, face, ears, and neck.

• Ensure hair is dry and combed through to remove any tangles. Divide the hair into sections ready for styling.
• Press the button marked 'I/0' to switch on.
• Rotate the temperature dial to select the desired straightening temperature. The red indicator light will blink until the selected temperature has been reached.
• Place a section of hair between the straightening plates, close to the roots.
• Hold the hair firmly between the straightening plates and slide down the length of the hair, from root to tip.
• Repeat as necessary.
• Allow the hair to cool before combing through.
• After use, press the button to switch off and unplug the appliance.
• Allow to cool before storing away

Heat Settings

If you have delicate, fine, bleached or coloured hair, use the lower heat setting. For thicker hair, use the higher heat setting. It is suggested to always complete a test on initial use to ensure the correct temperature is used on the hair type. Start on the lowest setting and increase the temperature until desired result is achieved.

Below is a guide of the temperature settings:
1-3 = 170°C-180°C
4-8 = 185°C-205°C
9-13 = 210°C-235°C

Auto Shut Off

This appliance has an automatic shut off feature for added safety. If the appliance is switched on for more than 72 minutes continuously, it will automatically switch off. If you wish to continue using the appliance after this time, simply press the I/0 button to turn the power on.

Heat Wrap

The appliance comes with a heat wrap for use during and after styling. During use do not place the appliance on any heat sensitive surface, even when using the heat wrap provided. After use, switch off and unplug the appliance. Immediately wrap the appliance in the heat wrap provided and allow to fully cool down. Continue to keep it out of reach of children as it will remain hot for several minutes.

The outer satin material is not heat resistant and the appliance should not be placed on this material whilst hot.

CLEANING & MAINTENANCE

To keep your appliance in the best possible condition, please follow the steps below:

• Do not wrap the lead around the appliance, instead coil the lead loosely by the side of the appliance.
• Do not use the appliance at a stretch from the power point.
• Always unplug after use.

Made in China

BABYLISS SARL
99 Avenue Aristide Briand
92120 Montrouge
France

www.babyliss.com

FAC/2019/03

IB-19/075A