BaByliss I-PRO 235 - Short to Medium Hair Manual

Read the safety instructions first.

OVERVIEW

BaByliss Diamond Ceramic is a high-density ceramic coating for professional use. The perfect glide and heat-transfer qualities guarantee softness, shine and protection of the hair. ST388E has the following features:

• BaByliss Diamond Ceramic professional plates: 24 mm x 120 mm (1)
• Intense button: 2 positions (2)
• Protect button: 4 positions (3)
• On/off switch - Automatic switch off (4)
• Swivel cord (5)
• Floating plates: they make gliding and handling of the iron easier by applying constant pressure on the hair without damaging it (6)
• Temperature regulator with LED screen– 6 settings (140 - 160 - 180 - 200 - 220 - 235°C)
• i-Temperature Technology – Immediate heat-up – Perfectly stable temperature
• Ionic function: Negative ions are distributed through the hair during straightening to reduce frizz and static electricity.
• Wet & Dry: designed especially for use on either dry or wet hair
• Locking system for optimal protection and storage.
• Heat-resistant insulated mat

USE

Straightening: Plug in the appliance, switch on and allow to heat up. The default temperature is 200°C. The LED digital display will stop flashing when the unit has heated up to the selected temperature.

For a smooth straightening, press once on the Protect button and the straightener will reach 180°C; twice and the straightener will reach 160°C; three times and the straightener will reach 140°C; and four times and the straightener will reach 200°C. Press the same button again and the straightener will return to 180°C.

For an intense straightening, press once on the Intense button and the straightener will reach 220°C; twice and the straightener will reach 235°C. Press the same button again and the straightener will return to 220°C.

Thoroughly brush hair and section. Start with the underneath sections of hair. Take a section of about 2 to 3 cm width and place it between the 2 hot plates, being careful to avoid touching the hot surface of the appliance with your hand. Hold the hair firmly with the straightener and slide slowly along from the roots to the tips. Let the hair cool down before you comb it. After use, switch off and unplug the appliance. Allow to cool before storing away.

Styling: To create perfectly shaped bobs use as above but turn the appliance under at the end of your hair and hold in place for a couple of seconds and then release. For flick-ups follow the same procedure but angle the appliance out at the end of your hair instead of under.

Notes:

• The first time you use the unit, you may notice a little steam and a particular odor: this is common and will disappear the next time you use it. Note: When you are straightening, you might see some steam. Do not be concerned, this could be because of evaporation of the sebum, some residual hair products (leave-in hair care, hairspray, etc.) or excess water that is evaporating from your hair.
• Always select a lower temperature during the first use.
• It is possible to use a heat protection spray for optimal protection of the hair.
• If straightening is not effective enough, tighten the plates more firmly on your strand and let the appliance glide more slowly.

AUTO SHUT-OFF

If the appliance has been left on for over 1 hour, the appliance will automatically turn off.

MAINTENANCE

• Unplug the straightening iron and allow to cool completely.
• Clean the plates using a soft, dampened cloth, without soap, to preserve the optimal quality of the plates. Do not scratch the plates.
• To protect the plates, store the straightening iron with the plates closed tightly.

Made in China

BABYLISS
99 Avenue Aristide Briand
92120 Montrouge
France
www.babyliss.com