IBM IntelliStation M Pro Hardware Maintenance Manual page 53
Hide thumbs
Also See for IntelliStation M Pro:
- User manual (120 pages) ,
- Installation manual (112 pages) ,
- Technical information manual (71 pages)
Table of Contents
Advertisement
8. Touch the static-protective package containing the new drive to any unpainted
metal surface on the computer; then, remove the drive from the package and
place it on a static-protective surface.
9. Set any jumpers or switches on the new drive according to the documentation
that comes with the drive.
10. Attach the new drive to the drive tray. Place the drive on the drive tray and
align the holes on the drive with the mounting pins on the drive tray. Gently
pull both sides of the drive tray outward, and insert the mounting pins into the
holes on the drive.
11. Slide the drive into the drive bay until the drive snaps into place, and place the
drive cage back into the computer.
Important: The following illustration shows where the connectors on the
parallel IDE and serial ATA (SATA) drives should be located when you install
the drive in the drive tray.
Connectors
on IDE drive
12. If you are installing a parallel IDE or serial ATA device, connect one end of the
parallel IDE or serial ATA signal cable into the back of the drive and the other
end of the cable into the parallel IDE or serial ATA connector on the system
board. For the location of the parallel IDE or serial ATA connectors, see
"System-board internal connectors" on page 33.
Note: Make sure to route the signal cable so that it does not block the airflow
to the rear of the drives or over the microprocessor.
13. Connect a power cable to the back of the drive. The connectors are keyed and
can be inserted only one way.
14. If you have other options to install or remove, do so now.
15. Replace the support bracket. See "Removing and installing the support
bracket" on page 35.
16. Replace the cover. See "Replacing the cover" on page 47 for details.
17. Reconnect the external cables and power cords; then, turn on the attached
devices and the computer.
Connectors on
Serial ATA drive
43
Installing options
Advertisement
Table of Contents
Troubleshooting
