IBM IntelliStation M Pro Hardware Maintenance Manual page 93
Hide thumbs
Also See for IntelliStation M Pro:
- User manual (120 pages) ,
- Installation manual (112 pages) ,
- Technical information manual (71 pages)
Table of Contents
Advertisement
6. Remove any of the following components that are installed on the system
board:
v Battery (see "Replacing the battery" on page 29).
v Microprocessor (see "Microprocessor/fan-sink assembly" on page 80).
Important: If you plan to reinstall an existing microprocessor to the new
system board, be careful when handling the adhesive material
on the microprocessor. If the adhesive material on the
microprocessor will be reused, do not contaminate it. If
replacement adhesive material is provided with the replacement
system board, be sure to remove all traces of existing adhesive
material from the microprocessor before applying the new
adhesive material.
v Adapters (see "Working with adapters" on page 35).
v DIMMs ("Installing memory modules" on page 44).
Note: The power supply has been removed in the illustration for purposes of
clarification (see "Power supply" on page 79). If any installed items
impede your ability to easily access the system board, you can remove
them from the computer.
System board
screws ( 8 places )
Heat-sink retention
module screws
( 4 places )
Heat-sink
retention
clip
FRU information (service only)
83
Advertisement
Table of Contents
Troubleshooting
