Epson RC700 Series Original Instructions Manual page 35
Robot controller
Hide thumbs
Also See for RC700 Series:
- Manual (316 pages) ,
- Maintenance manual (90 pages) ,
- Manual (340 pages)
Table of Contents
Advertisement
G6 :Table Top Mounting
■ Install the Table Top Mounting Manipulator with two or more people.
The Manipulator weights are as follows. Be careful not to get hands, fingers,
or feet caught and/or have equipment damaged by a fall of the Manipulator.
G6-45** : Approximately 27 kg: 60 lbs.
WARNING
G6-55** : Approximately 27 kg: 60 lbs.
G6-65** : Approximately 28 kg: 62 lbs.
(1) Secure the base to the base table with four
bolts.
NOTE
Use bolts with specifications conforming to
ISO898-1 property Class: 10.9 or 12.9.
Tightening torque: 32.0 N·m (326 kgf·cm)
(2) Using nippers, cut off the wire tie binding the
shaft and arm retaining bracket on the base.
(3) Remove the bolts securing the wire ties
removed in step (2).
(4) Remove the shipping bolt and jigs.
RC700 Series Rev.3
Installation 2. Installation
4-M8×4
Spring Washer
Pane Washer
20 mm
Screw Hole
(depth 20 mm or more)
Sheet
Wire tie
Bolt
: M5×15
Bolt
: M4×15
17
Advertisement
Table of Contents
