Table of Contents
Advertisement
global_main.book.book Page 23 Wednesday, May 11, 2022 9:31 AM
Extra Options and
Functions
You can use the extra options and functions on
some programmes to customize the cycle.
Customising a Washing
Programme
Each programme has default settings that are
selected automatically. You may also customise
these settings using these buttons.
Soil Level
Use this option to select the wash strength.
• Press the Soil Level button repeatedly until the
desired soil level is selected.
Temp.
Use this option to change water temperature.
• Press the Temp. button until the desired setting
is lit.
Water Level
This appliance detects the amount of clothes
automatically, then sets the water level. However,
manually increasing the water level may be
required and recommended to avoid linting and
unbalanced errors when the load is bulky but
lightweight.
• Press Water Level option to adjust water level.
• When you select a wash programme, the water
level will be shown on the control panel.
• When water level is automatically detected, it
may differ depending on the amount of clothes
even though the same water level is indicated on
the control panel.
Wash
Adjusting the wash time setting modifies the cycle
times and/or wash actions.
• Press Wash button until the desired wash time is
selected.
Rinse
Use this option to change the number of rinses.
• Press Rinse button to change the number of
rinses.
• When the Rinse option is selected,
• If selecting the maximum number of rinses, then
this option is deactivated.
NOTE
• This option is only available on some
programmes.
Spin
Use this option to change the spin strength. When
you press the START/PAUSE button after selecting
this option, the remaining time is indicated on the
display.
NOTE
• Always keep the clothes amount to 2 kg or less
and make sure to redistribute the clothes evenly.
Using Basic Options
Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
Press the POWER button.
2
Select a washing programme.
3
Press the Delay button to set the required
delay ending time.
4
Press the START/PAUSE button.
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
l
icon is lit.
OPERATION
23
Advertisement
Table of Contents
