Table of Contents
Advertisement
4.2
Rapid traverse during jog traversing
Using the jog axis traverse switch and rapid traverse switch in operation panel, each axis
can be traversed in rapid.
(1)
Operation method for jog rapid traverse
1
2
(2) Jog rapid traverse speed
(3) Jog rapid traverse limit
In case that Q-setter is down, rapid traverse using jog switch operation is restricted.
[Jog mode selection]
Press the switch shown in left side, then the machine
becomes jog mode.
[Axis traverse by pressing direction button with rapid
+
traverse button at the same time]
Decide the axis and direction that want to be traversed.
or
The axis will traverse in rapid while the direction button
and rapid traverse button are pressed. The axis will
keep traversing at the speed set by the feed override
+
when rapid traverse switch is released.
Rapid traverse speed can be adjusted with feed override
switch as shown in the left figure. Regarding to the exact
speed, refer to the specification of machine.
OPERATION | 29
Advertisement
Table of Contents
