Table of Contents
Advertisement
Prepare for Router Installation
• When equipment installed in a rack (particularly in an enclosed rack) fails, try operating the equipment
Power Guidelines and Requirements
Check the power at your site to ensure that you are receiving power that is free of spikes and noise. Install a
power conditioner if necessary.
Power Guidelines and Requirements lists power requirements for the Cisco <platform name>.
Table 5: Power Requirements for <platform name>
Power Source
66W AC Power Adapter
(PWR-66W-AC-V2)
115W AC Power Adapter
(PWR-115W-AC)
30W AC Power Adapter
(PWR-30W-AC)
150W AC Power Adapter
(PWR-150W-AC)
66W DC Power Adapter
(PWR-66W-I-DC)
Network Cabling Specifications
The following sections describe the cables and thee specifications required to install Cisco 1100 Series ISRs:
Console Port Connections
The C111x has both EIA/TIA-232 asynchronous (RJ-45) and USB 5-pin micro Type B, 2.0 compliant serial
console ports. The console ports do not have any hardware flow control. Shielded USB cables with properly
terminated shields are recommended.
EIA/TIA-232
Depending on the cable and the adapter used, this port appears as a DTE or DCE device at the end of the
cable. Only one port can be used at the same time.
by itself, if possible. Power off other equipment in the rack (and in adjacent racks) to allow the router
under test a maximum of cooling air and clean power.
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
Input Rated
100-240V, 2A
100-240VAC, 2A, 50-60 Hz
100-240 VAC, 1A
100-240 VAC, 2A
24 V DC Nominal (19.7V DC to
30 V DC input range)
Power Guidelines and Requirements
Output Rated
12 VDC, 5.5A
12V, 4.6A, -53.5V 1.12A
12V , 2.5A
12V 5.5A, -53.5 1.5A
12 VDC, 5.5A
25
Hide quick links:
Advertisement
Chapters
Table of Contents
