hit counter script
Toro Super Recycler 20383 Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. Super Recycler 20383
  6. Operator's manual

Toro Super Recycler 20383 Operator's Manual

Hide thumbs Also See for Super Recycler 20383:
Table of Contents

Advertisement

Quick Links

Download this manual
Super Recycler
Model No. 20383—Serial No. 404314000 and Up

Introduction

This rotary-blade, walk-behind lawn mower is intended
to be used by residential homeowners. It is designed
primarily for cutting grass on well-maintained lawns
on residential properties. It is not designed for cutting
brush or for agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
identifies the location of the model and serial numbers
on the product. Write the product model and serial
numbers in the space provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure
2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
© 2019—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Figure 1
Register at www.Toro.com.
®
Lawn Mower
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order or the engine is constructed,
equipped, and maintained for the prevention of fire.
Gross or Net Torque: The gross or net torque
of this engine was laboratory rated by the engine
manufacturer in accordance with the Society of
Automotive Engineers (SAE) J1940 or J2723. As
configured to meet safety, emission, and operating
requirements, the actual engine torque on this class
of mower will be significantly lower. Please refer to
the engine manufacturer's information included with
the machine.
Important:
1500 m (5,000 ft) for a continuous period, ensure
that the High Altitude Kit has been installed
so that the engine meets CARB/EPA emission
regulations. The High Altitude Kit increases
engine performance while preventing spark-plug
fouling, hard starting, and increased emissions.
g226624
Once you have installed the kit, attach the
high-altitude label next to the serial decal on the
machine. Contact any Authorized Toro Service
Dealer to obtain the proper High Altitude Kit and
high-altitude label for your machine. To locate
a dealer convenient to you, access our website
at www.Toro.com or contact our Toro Customer
Care Department at the number(s) listed in your
Emission Control Warranty Statement.
Remove the kit from the engine and restore the
engine to its original factory configuration when
running the engine under 1500 m (5,000 ft). Do
not operate an engine that has been converted
for high-altitude use at lower altitudes; otherwise,
you could overheat and damage the engine.
Form No. 3423-219 Rev B
Operator's Manual
Figure 2
Safety-alert symbol
If you are using this machine above
Original Instructions (EN)
All Rights Reserved *3423-219* B
Printed in Mexico
g000502

Advertisement

Table of Contents
loading

Related Manuals for Toro Super Recycler 20383

Summary of Contents for Toro Super Recycler 20383

  • Page 1: Introduction

    Authorized Service equipped, and maintained for the prevention of fire. Dealer or Toro Customer Service and have the model Gross or Net Torque: The gross or net torque and serial numbers of your product ready.

  • Page 2: Table Of Contents

    If you are unsure whether or not your machine Checking the Blade-Brake-Clutch has been converted for high-altitude use, look for Operation ............16 the following label: Recycling the Clippings ........17 Bagging the Clippings........18 Discharging the Clippings ......... 19 Operating Tips ..........

  • Page 3: Safety

    Safety This machine has been designed in accordance with ANSI B71.1-2012. General Safety This product is capable of amputating hands and feet and of throwing objects. Always follow all safety instructions to avoid serious personal injury. Using this product for purposes other than its intended use could prove dangerous to you and bystanders.

  • Page 4: Safety And Instructional Decals

    Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decaloemmarkt Manufacturer's Mark 1. This mark indicates that the blade is identified as a part decal115-8411 115-8411 from the original machine manufacturer.
  • Page 5 decal131-4514b 131-4514 1. Warning—read the Operator's Manual. 2. Cutting/dismemberment hazard of hand, mower blade—stay away from moving parts; keep all guards and shields in place. 3. Cutting/dismemberment hazard of hand, mower blade—disconnect the spark-plug wire before performing maintenance. 4. Thrown object hazard—keep bystanders away. 5.

  • Page 6: Setup

    Setup Important: Remove and discard the protective plastic sheet that covers the engine and any other plastic or wrapping on the machine. Assembling and Unfolding the Handle No Parts Required Procedure WARNING Assembling and unfolding the handle improperly can damage the cables, causing an unsafe operating condition.
  • Page 7 g225815 Figure 4...

  • Page 8: Installing The Blade-Control Bar

    Installing the Blade-Control Bar No Parts Required Procedure g241429 Figure 5 Installing the Recoil-starter Rope in the Rope Guide No Parts Required Procedure g236533 Figure 6...

  • Page 9: Filling The Engine With Oil

    Filling the Engine with Oil No Parts Required Procedure Important: Your machine does not come with oil in the engine. Before starting the engine, fill the engine with oil. g235721 Figure 7 Assembling the Grass Bag No Parts Required Procedure g241560 Figure 8...

  • Page 10: Product Overview

    Product Overview Operation Note: Determine the left and right sides of the machine from the normal operating position. Before Operation Before Operation Safety General Safety • Become familiar with the safe operation of the equipment, operator controls, and safety signs. •...

  • Page 11: Filling The Fuel Tank

    – Store fuel in an approved container and keep it out of the reach of children. • Fuel is harmful or fatal if swallowed. Long-term exposure to vapors can cause serious injury and illness. – Avoid prolonged breathing of vapors. –...

  • Page 12: Checking The Engine-Oil Level

    Checking the Engine-Oil Level Service Interval: Before each use or daily Important: If the oil level in the crankcase is too low or too high and you run the engine, you may damage the engine. g235721 Figure 12 Adjusting the Cutting Height WARNING Adjusting the cutting height may bring you into contact with the moving blade, causing serious injury.

  • Page 13: Adjusting The Handle Height

    g225876 Figure 13 During Operation Adjusting the Handle Height During Operation Safety You may raise or lower the handle to a position comfortable for you. General Safety Rotate the handle lock, move the handle to 1 of 3 positions, and lock the handle into position (Figure •...

  • Page 14: Starting The Engine

    Uneven terrain could cause the • Use accessories and attachments approved by machine to overturn or cause you to lose your The Toro® Company only. balance or footing. • If the machine strikes an object or starts to vibrate,...

  • Page 15: Using The Self-Propel Drive

    Using the Self-Propel Drive Shutting Off the Engine To operate the self-propel drive, simply walk with your Service Interval: Before each use or daily hands on the upper handle and your elbows at your To shut off the engine, press and hold the sides, and the machine will automatically keep pace engine-shutoff button (Figure...

  • Page 16: Disengaging The Blade

    Using the Grass Bag Service Interval: Before each use or daily You can use the grass bag to perform an additional test to check the blade-brake clutch. Install the empty grass bag on the machine. Start the engine. g003124 Figure 19 Engage the blade.

  • Page 17: Recycling The Clippings

    Recycling the Clippings Your machine comes from the factory ready to recycle the grass and leaf clippings back into the lawn. If the side-discharge chute is on the machine, remove it and lock the side-discharge deflector; refer to Removing the Side-Discharge Chute (page 20) before recycling the clippings.

  • Page 18: Bagging The Clippings

    Bagging the Clippings Use the grass bag when you want to collect grass and leaf clippings from the lawn. If the side-discharge chute is on the machine, remove it and lock the side-discharge deflector; refer to Removing the Side-Discharge Chute (page 20).

  • Page 19: Discharging The Clippings

    g231916 Figure 24 Discharging the Clippings Side-discharge or rear-discharge the clippings when cutting very tall grass. WARNING The blade is sharp; contacting the blade can result in serious personal injury. Shut off the engine and wait for all moving parts to stop before leaving the operating position. Side-Discharging the Clippings If the bag is on the machine, remove it and insert the rear plug;...
  • Page 20 Installing the Side-Discharge Chute Unlock the side-discharge deflector (A of Figure 26). Lift open the side-discharge deflector (B of Figure 26). Install the side-discharge chute and close the deflector onto the chute (B, C, and D of Figure 26). g231920 Figure 26 Removing the Side-Discharge Chute To remove the side-discharge chute, reverse the steps above.

  • Page 21: Operating Tips

    • For best performance, install a new blade before the cutting season begins. • Replace the blade when necessary with a Toro replacement blade. Cutting Grass • Cut only about a third of the grass blade at a time.

  • Page 22: After Operation

    Cleaning under the Machine After Operation Service Interval: Before each use or daily After Operation Safety WARNING The machine may dislodge material from General Safety under the machine. • Clean grass and debris from the machine to help • Wear eye protection. prevent fires.

  • Page 23: Maintenance

    • To ensure optimum performance and continued safety certification of the machine, use only genuine Toro replacement parts and accessories. Replacement parts and accessories made by other manufacturers could be dangerous, and such use could void the product warranty.

  • Page 24: Preparing For Maintenance

    Preparing for Maintenance Servicing the Air Filter Shut off the engine and wait for all moving parts Service Interval: Yearly to stop. Press down on the latch tabs on top of the Disconnect the spark-plug wire from the spark air-filter cover (Figure 30).

  • Page 25: Changing The Engine Oil

    Changing the Engine Oil After draining the used oil, return the machine to the operating position. Service Interval: After the first 5 hours Carefully pour about 3/4 of the engine capacity of oil into the oil-fill tube. Yearly Wait 3 minutes for the oil to settle in the engine. Note: Run the engine a few minutes before changing the oil to warm it.

  • Page 26: Replacing The Blade

    Replacing the Blade Cleaning the Blade-Brake-Clutch Shield Service Interval: Yearly—Replace the blade or have it sharpened (more frequently if the Service Interval: Every 25 hours edge dulls quickly). Clean the blade-brake-clutch shield yearly to prevent Important: You will need a torque wrench to the blade from stalling while you mow.

  • Page 27: Adjusting The Self-Propel Drive

    (Figure 36). On the last refueling of the year, add fuel stabilizer (such as Toro Premium Fuel Treatment) to the fuel as directed on the label. Dispose of any unused fuel properly. Recycle it according to local codes or use it in your automobile.
  • Page 28 While the exposure from Toro products may be negligible or well within the “no significant risk” range, out of an abundance of caution, Toro has elected to provide the Prop 65 warnings. Moreover, if Toro does not provide these warnings, it could be sued by the State of California or by private parties seeking to enforce Prop 65 and subject to substantial penalties.

Table of Contents