Table of Contents
Advertisement
Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Place the camera on the camera frame and secure the camera.
2
Connect the camera cable to the camera module.
3
Press the camera frame down into the slot on the display-assembly base
until it snaps into place.
4
Route the camera cable and antenna cable through the routing guides on
the display-assembly base.
5
Connect the camera cable and antenna cable to the system board.
Post-requisites
1
Replace the
back
2
Replace the stand.
computer. After working inside your
cover.
After working inside your
57
Advertisement
Table of Contents
