Table of Contents
Advertisement
Power connector and cable
Description
Power connector and cable
Before removing the power cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the following components:
a.
Service door
b.
Hard drive
c.
Keyboard
d.
Top cover
e.
Card reader board
f.
Battery
g.
Display assembly right hinge
non-touch on page
Remove the power cable:
1.
Disconnect the cable from the system board (1).
2.
Remove the cable from the clip (2).
3.
Remove the power cable from the computer (3).
Reverse this procedure to install the power cable.
(Service doors on page
(Hard drive on page
37)
(Keyboard on page
40)
(Top cover on page
44)
(Card reader board on page
(Battery on page
58)
(Display assembly – non-touch on page 65
65)
31).
57)
Component replacement procedures
Spare part number
L01952-001
or
Display assembly –
71
Hide quick links:
Advertisement
Table of Contents
