Chapter 9 - Serial Programming Commands; Conventions; Menu Command Syntax - Honeywell Voyager 1602g User Manual
Wireless area-imaging pocket wireless area-imaging pocket scanner
Hide thumbs
Also See for Voyager 1602g:
- User manual (204 pages) ,
- Quick start manual (16 pages) ,
- Quick start manual (15 pages)
Table of Contents
Advertisement
CHAPTER
9
SERIAL PROGRAMMING
COMMANDS
The serial programming commands can be used in place of the programming bar-
codes. Both the serial commands and the programming barcodes will program the
scanner. For complete descriptions and examples of each serial programming
command, refer to the corresponding programming barcode in this manual.
The device must be set to an RS232 interface (see
mands can be sent via a PC COM port using terminal emulation software.
Conventions
The following conventions are used for menu and query command descriptions:
parameter
[option]
{Data}
bold
Menu Command Syntax
Menu commands have the following syntax (spaces have been used for clarity
only):
Prefix [:Name:] Tag SubTag {Data} [, SubTag {Data}] [; Tag SubTag {Data}] [...] Storage
Prefix
:Name:
Voyager 1602g User Guide
A label representing the actual value you should send as part of a
command.
An optional part of a command.
Alternatives in a command.
Names of menus, menu commands, buttons, dialog boxes, and win-
dows that appear on the screen.
Three ASCII characters: SYN M CR (ASCII 22,77,13).
This command is only used with wireless devices. It is used to specify
whether you're communicating with the host or the scanner. To send
information to the scanner (connected to host), use :Voyager: The
default factory setting for a Voyager scanner is Voyager scanner. This
page
21). The following com-
177
Advertisement
Table of Contents
