Recording - Sony NXCAM HXR-NX80 Operating Manual
Solid-state memory camcorder
Hide thumbs
Also See for NXCAM HXR-NX80:
- Simple live streaming quick manual (5 pages) ,
- Service manual (156 pages)
Table of Contents
Advertisement
Recording
Recording
Recording
Your camcorder records movies on memory cards. The factory setting for recording is XAVC
S 4K.
Check that the memory cards are inserted correctly, and press the START/STOP button
(handle record button) to start recording.
The recording lamps light up during recording.
To stop recording, press the START/STOP button (handle record button) again.
b Notes
• When [AUTO] is selected in the [MIC SELECT] menu and the XLR handle unit is connected to the
camcorder without a microphone attached to the INPUT1 and INPUT2 jacks, the internal microphone is
not selected and no audio is recorded. In this case, select [INT MIC] (p. 50).
• If the file format is XAVC S 4K and [4K REC OUTPUT] is switched to [EXTERNAL OUTPUT], then
[NIGHTSHOT LIGHT] is set to [OFF].
• If recording in XAVC S 4K is started with [4K REC OUTPUT] set to [EXTERNAL OUTPUT], then
[LCD BRIGHT] is set to [NORMAL].
• If the file format is AVCHD or XAVC S HD and [SIMUL/RELAY REC] is switched to
[SIMULTANEOUS REC], then [NIGHTSHOT LIGHT] is set to [OFF].
• If the file format is XAVC S 4K and streaming is started, then [4K REC OUTPUT] is set to [VF/LCD
PANEL], [NIGHTSHOT LIGHT] is set to [OFF], and [LCD BRIGHT] is set to [NORMAL] while
streaming.
• If the file format is AVCHD or XAVC S HD and streaming is started, then [NIGHTSHOT LIGHT] is set
to [OFF] and [LCD BRIGHT] is set to [NORMAL] while streaming.
• When the access lamp is lit or flashing in red, your camcorder is reading or writing data. Do not shake or
apply strong force to your camcorder, do not turn the power off, and do not remove the memory card,
battery pack or the AC Adaptor. The image data may be destroyed.
• If a movie file size exceeds 2 GB while recording in AVCHD format, the camcorder automatically divides
the file and creates a new one.
• The menu settings, picture profile settings, and settings made using the AUTO/MANUAL switch are
saved when you close the LCD screen and turn off the camcorder. The POWER/CHG lamp flashes while
the settings are being stored. If you remove the battery or disconnect the AC Adaptor with the power
turned on without closing the LCD screen, interrupting the power, the settings will not be saved.
z Tips
• The picture aspect ratio is fixed to 16:9.
• For details about changing the screen display during recording, see page 67.
• For details about screen display during recording, see page 17.
• The recording lamps can be set to stay off ([REC LAMP], p. 126).
• See page 149 about the recording time of movies.
30
[STBY] t [REC]
Advertisement
Table of Contents
