Table of Contents
Advertisement
System Event Log
Allows you to change the SEL event log configuration.
SEL Components [Enabled]
Allows you to enable or disable all features of system Event Logging during boot.
Configuration options: [Disabled] [Enabled]
•
•
Erase SEL [No]
Allows you to choose options for erasing SEL.
Configuration options: [No] [Yes, On next reset] [Yes, On every reset]
When SEL is Full [Do Nothing]
Allows you to choose options for reactions to a full SEL.
Configuration options: [Do Nothing] [Erase Immediately]
Log EFI Status Codes [Error code]
Disable the logging of EFI Status Codes, or log only error code, or only progress code,
or both.
Configuration options: [Disabled] [Both] [Error code] [Progress code]
Bmc network configuration
The sub-items in this configuration allow you to configure the BMC network parameters.
Configuration Address source DM_LAN1/LAN1 [Previous State]
This item allows you to configure LAN channel parameters statistically or dynamically (by
BIOS or BMC). Unspecified option will not modify any BMC network parameters during
BIOS phase.
Configuration options: [ Previous State] [Static]
5-38
The following items appears only when you set SEL Components to [Enabled].
All values changed here do not take effect until computer is restarted.
[DynamicBmcDhcp] [DynamicBmcNonDhcp]
Chapter 5: BIOS Setup
Advertisement
Table of Contents
