Table of Contents
Advertisement
2.
The ARRAY SELECTION MENU displays the available drives connected to the SATA
ports. Use the up/down arrow keys to select the drives you want to include in the RAID
set, and then press <Space>. When selected, the drive indicator changes from READY
to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Port # 2 DISK
SPACE-Sel,ENTER-EndArray,F10-Configure,F2-Drive Info,F3-Virtual Drives,F4-HSP
•
•
•
3.
Select all the drives required for the RAID set, and then press <F10> to configure array
setting.
4.
Press <Space> to select the configurable array.
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Cursor Keys, SPACE-(De)Select F2-Chidinfo F3-SlotInfo F10-Configure Esc-Quit
6-6
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version
Easy Configuration - ARRAY SELECTION MENU
0
1
2
3
74.74GB HDS728080PLA380
The information of the selected hard disk drive displays at the bottom of the screen.
You need at least two identical hard disk drives when creating a RAID 1 set.
You need at least four identical hard disk drives when creating a RAID 10 set.
LSI Software RAID Configuration Utility Ver C.05 Sep 17,2010
BIOS Version
Easy Configuration - ARRAY SELECTION MENU
Select Configurable Array(s)
A-0
0
SPAN-1
1
2
3
A.10.09231523R
PORT #
ONLIN A00-00
ONLIN A00-01
READY
READY
A.10.09231523R
PORT #
ONLIN A00-00
ONLIN A00-01
READY
READY
05.01C05
Chapter 6: RAID Configuration
Advertisement
Table of Contents
