Table of Contents
Advertisement
WPA2/WPA with pre-shared key (PSK)
WPA
is a more advanced procedure than WEP for protecting wireless networks. Dynamic
keys, based on TKIP (Temporal Key Integrity Protocol), offer increased security. The new
standard WPA2 uses
WPA-PSK
is a special WPA mode for private users and users in small companies without
their own authentication server. After a certain period of time
tion keys are automatically generated with the pre-shared key, automatically changed
("rekeying") and authenticated between the devices.
Note:
Every PC (network adapter) that requires access to a WPA-protected wireless network
must also support WPA. Information about this can be found in the operating manual
for your network adapter.
If you have performed a successful WPS registration before a manual configuration of
security data, this page shows the encryption settings. You can see this key unmasked
in the Advanced Settings (see page 93) for manual configuration of network adapters
without WPS function.
ì
If you use WPS-Registration click on Next >.
If you do not use WPS:
ì
Select WPA2-PSK if WPA2 is supported by all components in the wireless network.
If you have performed a successful WPS registration before a manual configuration of
security data, this page shows the encryption settings. You can see this key unmasked
in the Advanced Settings (see page 93) for manual configuration of network adapters
without WPS function.
ì
If you use WPS Registration click on Next >.
AES
(Advanced Encryption Standard) for encryption.
Security Setup Wizard
(Rekey
interval), encryp-
55
Advertisement
Table of Contents
