Page 1
คู่่ � มื ื อ การใช้้ ง าน เคู่รื � อ งฟอกอากาศ AIR PURIFIER OPERATION MANUAL “Plasmacluster” and “Device of a cluster of grapes” are trademarks of Sharp Corporation. * The number in this technology mark indicates an approximate number of ions supplied into air of 1 cm , which is measured around the center of a room applicable floor area (at 1.2 m height above the floor)
ENGLISH Thank you for purchasing this SHARP Air Purifier. Please read this manual carefully before using the product. This manual should be kept in a safe place for handy reference. CONTENTS IMPORTANT SAFETY HOW TO CHANGE VARIOUS INSTRUCTIONS ........2 SETTINGS..........
Page 27
FEATURES A unique Combination of Air Treatment Technologies Triple Filtration System + Plasmacluster Plasmacluster High Density Plasmacluster 25000 The higher the ion density, the greater the effect. By emitting a balance of positive and negative ions, Plasmacluster air treatment is a natural process.
Sharp authorized Service Center or similarly qualified persons in order to avoid a hazard. NOTE Contact the nearest Service Center for any problems, adjustments, or repairs.
Page 29
sensors. The product may not operate properly. near the product. The fluororesin or silicone could get stuck inside the product, and cause 3. Avoid use in locations where furniture, fabrics, Plasmacluster Ions cannot be generated. or other items may come in contact with and restrict the air inlets and/or outlets.
Page 30
SAFETY / PRECAUTIONS OF THE Wi-Fi FUNCTION WARNING 3. At the following places, Wi-Fi connection might be unstable: a. Inside of a building made with concrete, When remotely controlling the air purifier reinforcing steel or metal. In case of remote operation from outside, you b.
PART NAMES MAIN BODY Back Side 14 15 Air Inlet 18 Sensor Cover (Left and Right) Side Panel 19 Sensitive Odor Sensor (Left and Right) (Internal) Pre-Filter Sensor (Left and Right) (Internal) Temperature / Humidity Deodorizing Filter (Left and Right) 21 Power Cord Micro HEPA Plus Filter (Left and Right)
Page 32
OPERATION PANEL DISPLAY *4,5 Cloud Service Indicator Power ON/OFF Button Illuminates when "Cloud Service" in the designated Wi-Fi Button App is ON. ON Timer Indicator Switching Display Button Filter Reset Button (Press 3 sec.) OFF Timer Indicator CLEAN ION SHOWER Button, Lamp Child-Lock Indicator Child-Lock Button (Press 3 sec.)
PREPARATION • To maintain the quality of the filter, it is installed in the product and packaged in a plastic bag. • Be sure to stop operation and unplug the product before filter installation or replacement. FILTER INSTALLATION Install the Pre-Filter. Click Remove the Side Panel.
Wi-Fi access point (Router) (SHARP ID). Wi-Fi specifications supported by this • If you do not have a SHARP ID, please register product to create a SHARP ID. • Frequency : 2.4GHz band / 5GHz band iii. Enter a name for your smart (IEEE802.11a/b/g/n)
Page 35
How to set Wi-Fi ON / OFF Follow instructions on the App. • If the Wi-Fi Indicator lights up, the connection is after completing the inisial successfully completed. set up Light up If you would like to turn the Wi-Fi OFF: Tap “REGISTER”.
OPERATION START/STOP SELECT AIR VOLUME AND MODE START STOP ♪ ♪ ~ ♪ ♪ AUTO ♪ POLLEN NOTE ♪ • When the product starts operating the operation SLEEP starts in the previous mode it was operated in. ♪ ♪ ♪ CLEAN ION SHOWER MODE AUTO:...
Page 37
CHILD LOCK The operation panel will be locked. (with the product ON or OFF) Press for 3 sec. CANCELLATION ♪ ♪ ♪ NOTE • It is possible to turn Wi-Fi off while in Child Lock Mode. SWITCH DISPLAY ♪ ♪ Humidity ♪...
HOW TO CHANGE VARIOUS SETTINGS • You can change the product and Wi-Fi When on Wi-Fi setting functions on page 13 - 16. Refer to page 14 - 16 for the details of each function. Turn the product OFF. When on Product setting ♪...
Page 39
PRODUCT FUNCTIONS (F1-F6) Function Setting When set to “OFF”, the “Dim” light illuminates for 8 seconds after operation starts and then the light goes off. However, some indicators that need notification will remain dim. Light Control You can select the brightness of the Display and Auto (default) Cleanliness Indicator.
Page 40
Wi-Fi FUNCTIONS (A1-A9) Function Setting Select “ ” by following Steps 1 - 3 on page 12. Press "Switching Display" Button to select Setting " " or " ". Wi-Fi OFF Wi-Fi ON ♪ ♪ ♪ Wi-Fi adapter ON/OFF Complete NOTE ♪...
Page 41
Function Setting Select “ ” by following Steps 1 - 3 on page 12. Press “Switching Display” Button to display MAC address. ♪ ♪ ♪ ♪ ♪ ♪ ♪ ♪ ~ For example: Confirmation of In case MAC address is “12:34:56:AB:CD:EF”. MAC address Complete ♪...
Function Setting Select “ ” by following Steps 1 - 3 on page 12. Press "Switching Display" Button to select Setting " " or " ". Bluetooth OFF Bluetooth ON ♪ ♪ ♪ Bluetooth ON/OFF Complete ♪ ~ CARE AND MAINTENANCE •...
Page 43
SIDE PANELS / SENSORS PRE-FILTERS Sensors Remove the dust gently with a cleaning tool Remove the dust such as a vacuum cleaner. gently with a cleaning tool such as a vacuum cleaner. NOTE How to Clean Hard-to-Remove Dirt. Sensor Filter (Sensitive Dust Sensor) Side Filter Pre-Filter 1.
Page 44
MAINTENANCE REPLACEMENT Remove the dust on the filters. Filter Replacement Indicator NOTE The Filter Replacement Indicator will start flashing to remind the filter replacement is required. The • Do not wash the filters. Do not expose to flashing speed becomes faster once the filter is sunlight (Otherwise these filters may lose their requires to change immediately.
Page 45
PLASMACLUSTER ION GENERATING UNIT (Electrode Section) REPLACEMENT AND MAINTENANCE CYCLE Parts Name Maintenance Cycle Max Service Life Replacement Model Plasmacluster Ion Every 6 months or more often if 19,000 hours IZ-C90ME Generating Unit necessary *1: In the following, "Plasmacluster Ion Generating Unit" is abbreviated as "Unit". *2: The replacement time will be announced by the Unit Replacement lamp.
Page 46
REPLACEMENT Unit Replacement Indicator When the total operation time exceeds 17,500 hours, the Unit Replacement Indicator will flash to indicate that the Unit needs replacement. (Page 6) Operating time Explanation 17,500 hours Replace the Unit. Flashes slowly 19,000 hours No Plasmacluster ions will be released by the Unit.
TROUBLESHOOTING The Cleanliness Indicator changes color Before calling for service, please review • frequently. the Troubleshooting list below, since the problem may not be the product • The Cleanliness Indicator automatically change malfunction. color when the Sensitive Dust Sensor and Sensitive Odor Sensor detect impurities.
Page 48
ABOUT THE Wi-Fi When changing the smart device FUNCTION • Perform the following steps. 1. Delete the registration of the old smart device from the designated App. The Wi-Fi connection of the air purifier 2. Use the new smart device to perform “INITIAL and the router is not working.