Installation Options With Rack-Mount Kits - Cisco Nexus 93108TC-FX3P Hardware Installation Manual

Aci-mode switch

Hide thumbs Also See for Nexus 93108TC-FX3P:

Table of Contents

Installation Options with Rack-Mount Kits

Warning

Caution

Note

Warning

Installation Options with Rack-Mount Kits

The rack-mount kit enables you to install the switch into racks of varying depths. You can position the switch

with easy access to either the port connections or the fan and power supply modules.

You can install the switch using the following rack-mount options:

• Rack-mount kit (NXK-ACC-KIT-1RU) which you can order from Cisco. This option offers you easy

• Rack-mount kit (N3K-C3064-ACC-KIT) which you can order from Cisco.

Cisco Nexus 93108TC-FX3P ACI-Mode Switch Hardware Installation Guide

Statement 1032 Lifting the Chassis

To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the handles

on modules, such as power supplies, fans, or cards. These types of handles are not designed to support the

weight of the unit.

Statement 1006 Chassis Warning for Rack-Mounting and Servicing

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to

ensure that the system remains stable. The following guidelines are provided to ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the

heaviest component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the

unit in the rack.

To prevent loss of input power, ensure the total maximum loads on the circuits supplying power to the switch

are within the current ratings for the wiring and breakers.

For AC input application, please refer to the statement below:

Statement 1005 Circuit Breaker

This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the

protective devices is rated not greater than 20A (North America), 16A (Europe), and 13A (UK).

installation, greater stability, increased weight capacity, added accessibility, and improved removability

with front and rear removal.

Installing the Switch Chassis

Table of Contents

N9k-c93108tc-fx3p N9k-c93108tc-fx3h