Related Manuals for Siemens LC81JAN60
Summary of Contents for Siemens LC81JAN60
- Page 1 LC81JAN60 Extractor hood EN User manual and installation instructions Register your appliance on My Siemens and discover exclusive services and offers. Siemens Home Appliances...
-
Page 2: Table Of Contents
en Safety Further information and explanations are available online: Table of contents ¡ Keep the instruction manual and the product information safe for future refer- ence or for the next owner. INFORMATION FOR USE ¡ Do not connect the appliance if it has been Safety .............. 2 damaged in transit. -
Page 3: Safety
Safety en Hot oil and fat ignites very quickly. WARNING ‒ Risk of burns! ▶ Always supervise hot oil and fat. The accessible parts of the appliance become ▶ Never extinguish burning oil or fat with wa- hot during operation. ter. Switch off the hotplate. Extinguish ▶... -
Page 4: Avoiding Material Damage
en Avoiding material damage Improper repairs are dangerous. Penetrating moisture may cause an electric ▶ Repairs to the appliance should only be shock. carried out by trained specialist staff. ▶ Do not use wet sponge cloths. ▶ Only use genuine spare parts when repair- WARNING ‒ Risk of explosion! ing the appliance. -
Page 5: Operating Modes
Operating modes en Operating modes 4 Operating modes 4.1 Air recirculation To bind odours in air recirculation mode, you must install an odour filter. The air which is drawn in is cleaned by the grease fil- The different options for operating the ters and an odour filter, and conveyed back into the appliance in air circulation mode can room. -
Page 6: Before Using For The First Time
en Before using for the first time Switching the lighting on or off Home Connect Setting the brightness Before using for the first time 6 Before using for the first time Configure the settings for initial start-up. Clean the ap- 6.1 Setting an operating mode pliance and accessories. - Page 7 Home Connect en In the Home Connect app, you can set the colour tem- 8.8 Setting the colour temperature perature for the light from cold to warm. Home Connect 9 Home Connect This appliance is network-capable. Connecting your ap- 9.2 Resetting the connection pliance to a mobile device lets you control its functions To reset the saved connections to the home net- ▶...
-
Page 8: Hob-Based Hood Control
en Hob-based hood control ¡ Status of any previous reset to factory settings. Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. In- This initial registration prepares the Home Connect formation on data protection can be retrieved in the functions for use and is only required when you want to Home Connect app. -
Page 9: Cleaning And Servicing
Cleaning and servicing en Clean aluminium using a soft cloth and glass Soak the grease filter in hot soapy water. ‒ cleaner. Use special grease solvent for stubborn dirt. You Clean plastic using a soft cloth and glass can obtain grease solvents from customer service ‒... -
Page 10: Troubleshooting
en Troubleshooting Replacing the odour filter Position the small filter at the back and swing it Open the glass plate. Remove the grease filters. You can find information about removing the grease filters in the operating instructions for your appli- ance. Position the large odour filters at the bottom swing them up ... -
Page 11: Disposal
Disposal en Fault Cause and troubleshooting The LED lighting Different causes are possible. does not work. Defective LED lights may be replaced by the manufacturer, their customer service or a ▶ qualified technician (electrician) only. Call ▶ → "Customer Service", Page 11. The button illumina- Different causes are possible. -
Page 12: Accessories
A detailed Declaration of Conformity can be found on- A detailed RED Declaration of Conformity can be found line at siemens-home.bsh-group.com/uk/ among the online at siemens-home.bsh-group.com among the ad- additional documents on the product page for your ditional documents on the product page for your appli- appliance. -
Page 13: Information Regarding Free And Open
Information regarding Free and Open Source Software en Information regarding Free and Open Source Software 17 Information regarding Free and Open Source Software This product includes software components that are li- The source code will be made available to you on re- censed by the copyright holders as free or open quest. -
Page 14: 19.5 Secure Installation
en Installation instructions Tip: The retaining bracket for the flue duct section and 19.4 Safety clearances the small silver and black crews are included in the Comply with the safety clearances for the appliance. scope of delivery but are not required for air recircula- tion appliances. - Page 15 Installation instructions en cabinet, an upper cabinet or the wall must ▶ Call customer services. → Page 11 be at least 50 mm. Improper repairs are dangerous. ▶ Repairs to the appliance should only be WARNING ‒ Risk of injury! carried out by trained specialist staff. Components inside the appliance may have ▶...
- Page 16 en Installation instructions Install the appliance with a fixing material which is WARNING ‒ Risk of electric shock! sufficiently stable and has been adjusted accord- It must always be possible to disconnect the appliance ingly for both the structural conditions and the from the electricity supply. The appliance must only be weight of the appliance.
- Page 17 Installation instructions en Use a spirit level to align the appliance bracket hori- Hook the appliance into the appliance bracket from zontally and screw it firmly in place. above so that it clicks firmly into place. To align the appliance, if necessary, adjust the height of the appliance from above using a screw- driver.
- Page 18 en Installation instructions Note: Do not knock the gas pressure dampers Clip the gas pressure dampers onto the left- and against the painted inner frame. right-hand side of the glass panel. Clip the gas pressure dampers in on the left- and right-hand side of the appliance. Insert the plug.
- Page 19 Installation instructions en Insert the grease filters. Connect the appliance to the power supply. Fitting the air recirculation deflector Push the air recirculation deflector onto the air-pipe connector until the air recirculation deflector audibly engages. To change the air circulation, turn the air recircula- tion deflector clockwise or anti-clockwise.
- Page 20 EN Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom BSH Hausgeräte GmbH Carl-Wery-Straße 34...