hit counter script
Sony PMC-DR45L Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Stereo System
  5. PMC-DR45L
  6. Service manual
Sony PMC-DR45L Service Manual

Sony PMC-DR45L Service Manual

Personal component system
Hide thumbs Also See for PMC-DR45L:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver 1.1 2001. 11
CD player section
System
Compact disc digital audio system
Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of
about 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV)
Number of channels
2
Frequency response
20 - 20,000 Hz +0/–1 dB
Wow and flutter
Below measurable limit
Radio section
Frequency range
FM
87.5 - 108 MHz
MW
531 - 1,602 kHz
LW
153 - 279 kHz
IF
FM: 10.7 MHz
MW/LW: 450 kHz
Aerials
FM: Lead aerial
MW/LW: Loop aerial
Cassette-corder section
Recording system
4-track 2-channel stereo
Fast winding time
Approx. 120 s (sec.) with Sony cassette C-60
Frequency response
TYPE I (normal): 50 - 14,000 Hz
Sony Corporation
9-927-669-12
2001K0400-1
Home Audio Company
© 2001. 11
Published by Sony Engineering Corporation
PMC-DR45L
Model Name Using Similar Mechanism CFD-S45L/S47L
CD Loading Mechanism Type
CD
Section
CD Mechanism Type
Optical Pick-up Name
Model Name Using Similar Mechanism PMC-DR50L/DR70L
Tape
Section Tape Transport Mechanism Type
SPECIFICATIONS
General
Speaker
Full range: 8 cm (3
cone type × 2
Input
LINE IN jack (stereo minijack)
Minimum input level 440 mV
Outputs
Headphones jack (stereo minijack)
For 16 - 64 ohms impedance headphones
LINE OUT jack (stereo minijack)
Rated output level 330 mV at load impedance
47 kilohms
OPTICAL DIGITAL OUT (CD) (optical output connector)
Wave length: 760 - 880 nm
Maximum power output
15 W + 15 W
Power requirements
For personal component system:
230 V AC, 50 Hz
For remote control:
3 V DC, 2 R6 (size AA) batteries
Power consumption
AC 45 W
PERSONAL COMPONENT SYSTEM
– 1 –
AEP Model
UK Model
E Model
FLM-DR45-149
KSM-213CCP
KSS-213C
MF-DR45
in.) dia., 4 ohms,
1/4
– Continued on next page –

Advertisement

Table of Contents
loading

Related Manuals for Sony PMC-DR45L

Summary of Contents for Sony PMC-DR45L

  • Page 1 MW/LW: Loop aerial Cassette-corder section Recording system PERSONAL COMPONENT SYSTEM 4-track 2-channel stereo Fast winding time Approx. 120 s (sec.) with Sony cassette C-60 Frequency response TYPE I (normal): 50 - 14,000 Hz Sony Corporation 9-927-669-12 2001K0400-1 Home Audio Company ©...

  • Page 2: Table Of Contents

    Dimensions (incl. projecting parts) Player: approx. 137 × 212 × 202 mm (w/h/d) × 8 × 8 inches) Left speaker: approx. 137 × 212 × 202 mm × 8 × 8 inches) (w/h/d) (5 Right speaker: approx. 137 × 180 × 202 mm ×...

  • Page 3: Servicing Notes

    COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 4: General

    SECTION 2 GENERAL This section is extracted from instruction manual. – 4 –...
  • Page 5 – 5 –...
  • Page 6 – 6 –...

  • Page 7: Disassembly

    SECTION 3 DISASSEMBLY • The equipment can be removed using the following procedure. Cabinet (Front) Assy Cabinet (Rear) Control Board Top Block Assy Front Board Tuner Board Line Board Holder, Cassette Main Board Tape Mechanism Block Top Board (TC Board) CD Chassis Block H/P Board Plate Assy, Chuck...

  • Page 8: Cabinet (Rear)

    3-2. CABINET (REAR) 4 cabinet (rear) 3 BVTP 3x10 2 BVTP 3x10 1 BVTP 3x10 3-3. FRONT BOARD 1 BTP 2.6x8 2 BTP 2.6x8 3 FRONT board – 8 –...

  • Page 9: Control Board

    3-4. CONTROL BOARD 5 CONTROL board 1 CNP804 4 BVTP 3x10 2 CNP803 6 CNP307 3 BVTP 3x10 3-5. LINE BOARD 1 CNP304 3 CNP312 4 LINE board 2 BVTP 3x10 – 9 –...

  • Page 10: Tuner Board

    3-6. TUNER BOARD 1 screw 6 TUNER board 5 Removal the solder. 4 CNP1 2 BVTP 3x10 3 BVTP 3x10 3-7. HOLDER, CASSETTE 2 boss 4 holder, cassette 3 boss 1 spring, cassette – 10 –...

  • Page 11: Top Block Assy

    3-8. TOP BLOCK ASSY 5 top block assy 1 CNP306 4 claw 3 claws 2 connector CD block assy 3-9. CD CHASSIS BLOCK 3 CD chassis block 6 plate, CD 5 CNP703 4 CNP702 1 BVTP 3x10 2 BVTP 3x10 –...

  • Page 12: H/P Board

    3-10. H/P BOARD 1 BVTP 3x10 2 H/P board 3-11. MAIN BOARD 5 connector 3 MAIN board 4 CNP302 2 BVTP 3x10 1 BVTP 3x10 – 12 –...

  • Page 13: Tape Mechanism Block

    3-12. TAPE MECHANISM BLOCK (TC BOARD) 3 tape mechanism block 2 BVTP 3x10 1 BVTP 3x10 4 connector 8 holder MD 6 TC board 7 BVTP 3x10 5 BVTP 3x10 3-13. TOP BOARD 3 panel assy, top 6 TOP board 4 BTP 2.8x8 5 BTP 2.8x8 1 BVTP 3x10...

  • Page 14: Plate Assy, Chuck

    3-14. PLATE ASSY, CHUCK 2 plate assy, chuck 1 P 2.6x8 3-15. TRAY 2 claw 3 claw 5 tray – 14 –...

  • Page 15: Loading Board

    3-16. LOADING BOARD 1 belt 5 B 2x3 4 CN651 6 claw 3 pulley 2 claw 7 claw 8 LOADING board 3-17. CD BOARD 3 CNP701 1 Removal the four solders. 4 CD board 2 P 2x5 – 15 –...

  • Page 16: Cd Mechanism Block

    3-18. CD MECHANISM BLOCK 0 arm 4 PWH 2.6x10 1 PWH 2.6x10 2 gear, drive qa CD mechanism block 8 PWH 2.6x10 3 gear CD mechanism block chassis chassis 3-19. POWER BOARD 6 CNP911 4 bracket, cover qd B 4x6 7 CNP901 0 speaker board 9 BVTP 3x10...

  • Page 17: Mechanical Adjustments

    SECTION 5 SECTION 4 MECHANICAL ADJUSTMENTS ELECTRICAL ADJUSTMENTS PRECAUTION 5-1. TAPE SECTION 0 dB = 0.775 V 1. Clean the following parts with a denatured-alcohol-moistened 1. The adjustments should be performed in the order given in the swab: service manual. (As a general rule. Playback circuit adjustment record/playback/erase head pinch roller should be completed before performing recording circuit ad-...
  • Page 18 Record/Playback/Erase Head Azimuth Adjustment Adjustment Location: Procedure: 1. Mode: FWD/REV playback screwdriver test tape P-4-A100 level meter (forward) (10 kHz, –10 dB) 32 Ω – (reverse) i (headphones) jack (J301) 2. Turn the adjustment screw for the maximum output levels. If these levels do not match, turn the adjustment screw until both of output levels match together within 1 dB.

  • Page 19: Tuner Section

    5-2. TUNER SECTION 0 dB = 1 µV FM FREQUENCY COVERAGE CHECK Precautions in Repairing Note : As a tuner unit (TU1) is difficult to repair if faulty, Frequency Display 87.5 MHz 108 MHz replace it with new one. Reading on Digital voltmeter 1.4 ±...
  • Page 20 Adjustment Location: – TUNER BOARD (COMPONENT SIDE) – FREQUENCY FREQUENCY COVERAGE COVERAGE ADJUSTMENT ADJUSTMENT TRACKING TP(VT) ADJUSTMENT TERMINAL ADJUSTMENT TRACKING ADJUSTMENT – 20 –...

  • Page 21: Cd Section

    Ver 1.1 5-3. CD SECTION TRAVERSE Check This check is to be done when the optical pick-up block is replaced. Notes on Check 1. Perform the traverse check in the CD test mode. Check Procedure: After check, be sure to exit the test mode. 1.
  • Page 22 Focus/Tracking Gain Check VOLT/DIV: 100 mV TIME/DIV: 2 ms Adjustment Location: CD board (Component side) 100 mV A frequency response analyzer is necessary in order to perform this 75 mV check exactly. However, this gain has a margin, so even if it is slightly off, there is no problem.
  • Page 23 Adjustment Location: CD board –CD BOARD (CONDUCTOR SIDE) – TP(VC) IC702 IC701 TP(FE) TP(RF) TP(TE) – 23 –...

  • Page 24: Diagrams

    SECTION 6 DIAGRAMS 6-1. IC PIN DESCRIPTIONS • CONTROL BOARD IC801 CXP82832-028Q (SYSTEM CONTROL) Pin No. Pin Name Pin Description GRID2 signal output GRID1 signal output — Not used. (Fixed at “H”.) C-SCOR SCOR signal input from the IC702 (CXD2587Q) T-CNT (END) T-COUNTER (T-END) signal input REG.CHK...

  • Page 25: Circuit Boards Location

    6-2. CIRCUIT BOARDS LOCATION Pin No. Pin Name Pin Description A-MUTE System mute signal output B-MUTE Tuner mute signal output C-MUTE CD mute signal output – Main Section – LINE-MUTE Line out mute signal output HEAD RELAY board C-AGCCNT CD AGC control signal output T-REC Tape REC signal output TOP board...

  • Page 26: Block Diagram -Tuner Section

    PMC-DR45L 6-3. BLOCK DIAGRAM — TUNER SECTION — TUNER BOARD DET OUT TUNER UNIT FM/MW/LW FRONT END,IF DET, FM STREO DEMODULATOR CNP1 (1/2) L OUT J1(1/2) IF AMP FM IF IN MPX IN L CH DET OUT DECODER EXT ANT...

  • Page 27: Block Diagram -Cd Section

    PMC-DR45L 6-4. BLOCK DIAGRAM — CD SECTION — CD BOARD DIGITAL SIGNAL PROCESSOR, D/A CONVERTER CD RF IC702 IC701 CNP701 CNP703 LOUT RFDC LOUT2 LOUT TAPE RFAC AOUT2 CD+5V CD+5V SECTION AIN2 CD+7.5V CD+7.5V (Page 31) LOUT1 R CH AOUT1...

  • Page 28: Block Diagram -Tape Section

    PMC-DR45L 6-5. BLOCK DIAGRAM — TAPE SECTION — LINE BOARD (2/2) MAIN BOARD (2/3) CNP311 CNJ304 R-CH J311 SOUND AMP POWER AMP LINE OUT IC302 J302 J321 IC311 SIGNAL OUT SIGNAL IN CNP903 R-CH J312 SP101 -1 L -1 L...

  • Page 29: Block Diagram -System Control, Power Section

    PMC-DR45L 6-6. BLOCK DIAGRAM — SYSTEM CONTROL, POWER SECTION — POWER BOARD (2/2) CONTROL BOARD (3/3) MAIN BOARD (3/3) POWER SWITCH Q322 T901 SYSTEM CONTROL LF901 POWER IC801(3/3) CNP309 CNP902 LINE CNP801(2/3) TRANSFORMER FILTER CNP901 (2/2) (2/2) D802 TC-AMS CD+7.5V...

  • Page 30: Printed Wiring Board -Tuner Section

    PMC-DR45L 6-7. PRINTED WIRING BOARD — TUNER SECTION — • Semiconductor Location Ref. No. Location (VT) (Page 47) THIS NOTE IS COMMON FOR PRINTED WIRING • U : B+ Line. for Printed Wiring Boards: BOARDS AND SCHEMATIC DIAGRAMS. • V : B– Line.

  • Page 31: Schematic Diagram -Tuner Section

    PMC-DR45L 6-8. SCHEMATIC DIAGRAM — TUNER SECTION — • Refer to page 67 for IC Block Diagrams. Refer to page 35 for Note. • Waveform 20mV/div 5µsec/div 0.9Vp-p 75kHz (X OUT) (Page 49) • Voltage is dc with respect to ground under no-signal (detuned) condition.

  • Page 32: Printed Wiring Boards -Cd Section

    PMC-DR45L 6-9. PRINTED WIRING BOARDS — CD SECTION — • Refer to page 36 for Note. (Page 54) (Page 47) • Semiconductor Location Ref. No. Location D701 C-10 D702 D703 D704 D705 IC651 IC701 F-12 IC702 E-10 IC703 Q701 G-14...

  • Page 33: Schematic Diagram -Cd Section

    PMC-DR45L 6-10. SCHEMATIC DIAGRAM — CD SECTION — • Refer to page 68 for IC Block Diagrams. Refer to page 40 for Waveforms. Refer to page 35 for Note. (Page 49) (KSS-213C) (Page 61) (Page 56) • Voltage and waveforms are dc with respect to ground Note: The components identified by mark 0 or dotted line under no-signal (detuned) conditions.
  • Page 34 PMC-DR45L 6-11. PRINTED WIRING BOARD — TC SECTION — • Refer to page 36 for Note. • Semiconductor Location Ref. No. Location D301 D302 IC301 Q301 Q302 Q303 Q304 Q305 Q306 Q307 HRPE301 Q308 REC/PB/ERASE Q309 Q310 HEAD Q311 Q334...

  • Page 35: Schematic Diagram -Tc Section

    PMC-DR45L 6-12. SCHEMATIC DIAGRAM — TC SECTION — • Refer to page 69 for IC Block Diagram. Refer to page 35 for Note. (Page 49) • Waveform 0.1V/div 5µsec/div 4Vp-p 19.5µsec Q301 (REC) • Voltage is dc with respect to ground under no-signal (detuned) condition.
  • Page 36 PMC-DR45L 6-13. PRINTED WIRING BOARDS — MAIN SECTION — • Refer to page 36 for Note. • Semiconductor Location Ref. No. Location D311 (Page 44) (Page 40) D312 D313 D315 D316 D317 D318 D319 D321 F-10 D322 D323 D324 D325...

  • Page 37: Schematic Diagram -Main Section

    PMC-DR45L 6-14. SCHEMATIC DIAGRAM — MAIN SECTION — • Refer to page 70 for IC Block Diagrams. Refer to page 35 for Note. (Page (Page 65) (Page 46) • Voltage is dc with respect to ground under no-signal (detuned) condition.

  • Page 38: Printed Wiring Board -Control Section

    PMC-DR45L 6-15. PRINTED WIRING BOARD — CONTROL SECTION — • Refer to page 36 for Note. • Waveforms 0.2V/div 50nsec/div 3Vp-p 8MHz IC801 (X’TAL) 0.1V/div 10µsec/div 2.6Vp-p 32.768kHz IC801 (TEX) 100nsec/div 0.1V/div 2.2Vp-p 4.33MHz IC811 (XO) – 51 – – 52 –...
  • Page 39 PMC-DR45L • Refer to page 36 for Note. (Page 47) • Semiconductor Location Ref. No. Location D802 D803 IC801 IC802 IC803 Q801 D-10 Q802 D-10 Q803 Q811 Q812 (Page 57) (Page 59) (Page 40) – 53 – – 54 –...

  • Page 40: Schematic Diagram -Control Section

    PMC-DR45L 6-16. SCHEMATIC DIAGRAM — CONTROL SECTION — • Refer to page 71 for IC Block Diagram. Refer to page 52 for Waveforms. Refer to page 35 for Note. (Page 42) (Page 60) (Page 58) (Page 50) • Voltage and waveforms are dc with respect to ground under no-signal (detuned) conditions.

  • Page 41: Printed Wiring Board -Front Section

    PMC-DR45L 6-17. PRINTED WIRING BOARD — FRONT SECTION — • Refer to page 36 for Note. 6-18. SCHEMATIC DIAGRAM — FRONT SECTION — • Refer to page 35 for Note. (Page 53) (Page 56) • Voltage is dc with respect to ground under no-signal (detuned) condition.

  • Page 42: Printed Wiring Board -Top Section

    PMC-DR45L 6-19. PRINTED WIRING BOARD — TOP SECTION — • Refer to page 36 for Note. 6-20. SCHEMATIC DIAGRAM — TOP SECTION — • Refer to page 35 for Note. (Page 56) (Page 53) – 59 – – 60 –...

  • Page 43: Printed Wiring Board -Line Section

    PMC-DR45L 6-21. PRINTED WIRING BOARD — LINE SECTION — • Refer to page 36 for Note. (Page 47) (Page 40) 6-22. SCHEMATIC DIAGRAM — LINE SECTION — • Refer to page 70 for IC Block Diagram. • Refer to page 35 for Note.
  • Page 44 PMC-DR45L 6-23. PRINTED WIRING BOARDS — POWER SECTION — • Refer to page 36 for Note. • Semiconductor Location Ref. No. Location D901 D902 D903 D904 D905 D906 D907 D908 D909 D910 D911 D912 IC311 Q901 Q902 Q903 Q904 Q905...

  • Page 45: Schematic Diagram -Power Section

    PMC-DR45L 6-24. SCHEMATIC DIAGRAM — POWER SECTION — • Refer to page 35 for Note. (Page 50) • Voltage is dc with respect to ground under no-signal (detuned) condition. no mark : FM Note: The components identified by mark 0 or dotted line with mark 0 are critical for safety.

  • Page 46: Ic Block Diagrams

    6-25. IC BLOCK DIAGRAMS IC701 CXA2568M IC1 LA1833N APC PD AMP LC/PD – PILOT LD ON OSC IN RF IN DET OUT DET OUT – HOLD AGCVTH VREF – – APC LD AMP RF. AMP BUFF DECODER PILOT HOLD SW ANTI-BIRDIE CANCEL AGCCONT...
  • Page 47 IC702 CXD2587Q 59 58 57 56 55 54 53 51 50 49 43 42 41 ERROR DIGITAL ASYMMETRY DIGITAL CORRECTOR CORRECTION OPERATIONAL AMPLIFIER LRCK ANALOG SWITCH PCMD INTERFACE DEMODULATOR CONVERTER EMPH XVDD CLOCK XTSL XTAI GENERATOR TIMING TES1 LOGIC XTAO TEST XVSS SERVO DSP...
  • Page 48 IC302 BD3859FV DYNAMIC DYNAMIC TRBL1 TRBL2 BUS2 BUS1 BUS1 BUS2 –31dB VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 –56dB –56dB VCC/2 LOGIC AGND DGND IC304 LA2010 COMP(1) COMP(2) RESET HOLD IC704 GP1F32T D. OUT CONSTANT VOLTAGE CIRCUITE LS TYPE ERROR DRIVE OUTPUT BUFFER REFERENCE...
  • Page 49 IC803 BU1924F RCLK QUAL (NC) DEFFERENTIAL BIPHASE RDATA 57KHz DECODER DECODER 1187.5Hz RDS/ARI CLOCK & DRIVER 8TH SWITCHED VREF ANTI-ALIASING COMPARATOR CAPACITOR FILTER VDD2 DIGITAL VSS2 VREF VDD1 ANALOG TEST VSS1 VSS3 – 71 –...

  • Page 50: Exploded Views

    SECTION 7 EXPLODED VIEWS NOTE: • The mechanical parts with no reference • -XX and -X mean standardized parts, so • Accessories and packing materials and number in the exploded views are not supplied. they may have some difference from the hardware (# mark) list are given in •...

  • Page 51: Cabinet (Top) Section

    7-2. CABINET (TOP) SECTION MF-DR45 not supplied FDP801 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-041-336-01 CABINET (TOP) A-3328-895-A LID ASSY, CASSETTE 3-041-370-01 SPRING, CASSETTE 3-041-342-01 HOLDER, CASSETTE * 53 A-3322-502-A MAIN BOARD, COMPLETE 3-029-158-01 CATCHER, PUSH * 54 A-3322-507-A CONTROL BOARD, COMPLETE...

  • Page 52: Cd Chassis Section

    7-3. CD CHASSIS SECTION not supplied not supplied KSM-213CCP M651 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-028-010-01 TRAY * 109 1-792-227-11 CABLE, FFC (CD PICK-UP) 3-028-019-01 PLATE, CHUCK * 110 A-3322-504-A CD BOARD, COMPLETE 1-452-899-21 MAGNET * 111 1-671-072-11 LOADING BOARD...

  • Page 53: Mechanism Deck Section (1)

    7-4. MECHANISM DECK SECTION (1) (MF-DR45) M691 (S692, 693, 694, 695) (S692, 693, 694, 695) PH691 179 180 S691 PM691 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-043-921-01 SCREW 3-029-589-01 TRIGGER, ARM 3-029-591-01 COLLAR 3-043-916-01 SPRING 3-043-906-01 GEAR, CAM 3-029-593-01 CLUTCH 3-034-597-01 CAM, ARM...

  • Page 54: Mechanism Deck Section (2)

    7-5. MECHANISM DECK SECTION (2) (MF-DR45) not supplied HRPE301 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 3-029-573-01 LEVER (HD) 3-029-578-01 REEL, CAP 3-029-576-01 PINCH, ROLLER 3-029-602-01 SPRING 3-029-574-01 PINCH (R), CAP 3-029-579-01 REEL, GEAR 3-029-575-01 PINCH (L), CAP 3-043-925-01 WASHER 3-043-913-01 SPRING...

  • Page 55: Optical Pick-Up Section

    7-6. OPTICAL PICK-UP SECTION (KSM-213CCP) not supplied M701 M702 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 0 251...

  • Page 56: Speaker (L) Section

    Ver 1.1 7-7. SPEAKER (L) SECTION J901 SP101 T901 F902 not supplied F901 The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Ref. No. Part No. Description Remark Ref.

  • Page 57: Speaker (R) Section

    Ver 1.1 7-8. SPEAKER (R) SECTION SP201 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3378-542-1 NET ASSY, FRAME 3-029-170-01 FOOT (SPEAKER) 3-049-718-01 DUCT (SPEAKER) SP201 1-529-615-11 SPEAKER (8cm) 3-042-255-01 BOX (R), SPEAKER (SILVER) 3-042-255-11 BOX (R), SPEAKER (WOOD) (SP) 3-042-255-21 BOX (R), SPEAKER (WOOD) (EXCEPT SP) –...

  • Page 58: Electrical Parts List

    SECTION 8 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in • Items marked “*” are not stocked since The components identified by the parts list may be different from the they are seldom required for routine service. mark 0 or dotted line with mark parts specified in the diagrams or the Some delay should be anticipated 0 are critical for safety.
  • Page 59 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JUMPER RESISTOR > JR752 1-216-296-00 SHORT JR753 1-216-295-00 SHORT JR701 1-216-296-00 SHORT JR754 1-216-295-00 SHORT JR702 1-216-296-00 SHORT JR755 1-216-296-00 SHORT JR703 1-216-296-00 SHORT JR756 1-216-296-00 SHORT JR704 1-216-296-00 SHORT JR705...
  • Page 60 CONTROL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R708 1-216-049-00 RES-CHIP 1/10W C802 1-162-282-31 CERAMIC 100PF R710 1-216-073-00 METAL CHIP 1/10W C804 1-162-294-31 CERAMIC 0.001uF R711 1-216-222-00 RES-CHIP 1/8W C805 1-162-282-31 CERAMIC 100PF R712 1-216-214-00 RES-CHIP 4.7K 1/8W C806...
  • Page 61 CONTROL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C885 1-102-516-11 CERAMIC 27PF R811 1-249-417-11 CARBON 1/4W C886 1-162-291-31 CERAMIC 560PF R812 1-249-417-11 CARBON 1/4W C887 1-162-288-31 CERAMIC 330PF R813 1-249-417-11 CARBON 1/4W C888 1-128-551-11 ELECT 22uF R814 1-249-421-11 CARBON...
  • Page 62 CONTROL FRONT LINE Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R869 1-249-417-11 CARBON 1/4W R416 1-249-421-11 CARBON 2.2K 1/4W R871 1-249-429-11 CARBON 1/4W R872 1-249-437-11 CARBON 1/4W < SWITCH > R873 1-249-401-11 CARBON 1/4W R874 1-249-421-11 CARBON 2.2K 1/4W...
  • Page 63 LINE LOADING MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < CONNECTOR > C119 1-126-964-11 ELECT 10uF C120 1-130-475-00 MYLAR 0.0022uF 5% * CNP312 1-580-155-11 PIN, CONNECTOR (PC BOARD) 3P C121 1-136-495-11 MYLAR 0.068uF C122 1-136-495-11 MYLAR 0.068uF <...
  • Page 64 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C326 1-126-963-11 ELECT 4.7uF IC304 8-759-800-71 IC LA2010 C327 1-126-934-11 ELECT 220uF IC305 8-759-324-40 IC KIA7805PI C329 1-126-964-11 ELECT 10uF C351 1-104-665-11 ELECT 100uF < JACK > C352 1-161-494-00 CERAMIC 0.022uF...
  • Page 65 MAIN POWER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R118 1-249-417-11 CARBON 1/4W R340 1-249-429-11 CARBON 1/4W R119 1-249-417-11 CARBON 1/4W R351 1-249-413-11 CARBON 1/4W R120 1-249-437-11 CARBON 1/4W R352 1-247-807-31 CARBON 1/4W R121 1-249-431-11 CARBON 1/4W R353 1-249-409-11 CARBON...
  • Page 66 POWER SPEAKER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C909 1-136-169-00 MYLAR 0.22uF Q908 8-729-036-77 TRANSISTOR KRC107M C910 1-126-968-11 ELECT 100uF Q909 8-729-037-34 TRANSISTOR KRA107M C911 1-127-876-21 CERAMIC 0.01uF Q910 8-729-012-83 FET 2SK679A C912 1-127-876-21 CERAMIC 0.01uF Q911 8-729-012-83 FET 2SK679A...
  • Page 67 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-3322-501-A TC BOARD, COMPLETE JR105 1-216-295-00 SHORT JR106 1-216-295-00 SHORT ******************* JR107 1-216-295-00 SHORT < CAPACITOR > JR108 1-216-295-00 SHORT JR109 1-216-295-00 SHORT C101 1-163-001-11 CERAMIC CHIP 220PF C103 1-163-139-00 CERAMIC CHIP 820PF...
  • Page 68 TC RF TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R311 1-216-308-00 METAL CHIP 1/10W < SWITCH > R312 1-216-093-11 RES-CHIP 1/10W R313 1-216-017-11 RES-CHIP 1/10W S801 1-762-798-11 SWITCH, KEY BOARD (LINE) R314 1-216-308-00 METAL CHIP 1/10W S802 1-762-798-11 SWITCH, KEY BOARD (TAPE N)
  • Page 69 TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 1-163-009-11 CERAMIC CHIP 0.001uF 8-719-988-61 DIODE 1SS355TE-17 1-164-489-11 CERAMIC CHIP 0.22uF 8-719-988-61 DIODE 1SS355TE-17 1-126-964-11 ELECT 10uF 8-719-050-69 DIODE KV1520N 1-104-760-11 CERAMIC CHIP 0.047uF 1-163-115-00 CERAMIC CHIP 82PF <...
  • Page 70 TUNER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 8-729-930-99 TRANSISTOR 2SC2413KP < VIBRATOR > < RESISTOR > 1-760-130-11 VIBRATOR, CRYSTAL (75kHz) ************************************************************* 1-216-029-11 METAL CHIP 1/10W 1-216-158-00 RES-CHIP 1/8W MISCELLANEOUS 1-216-017-11 RES-CHIP 1/8W *************** 1-216-089-11 RES-CHIP 1/10W 1-216-035-00 METAL CHIP 1/10W...
  • Page 71 Ref. No. Part No. Description Remark ACCESSORIES & PACKING MATERIALS ******************************** 1-501-374-11 ANTENNA, LOOP (MW/LW) 1-501-594-51 ANTENNA (FM) 1-770-019-11 ADAPTOR, CONVERSION PLUG 3P (UK) 1-791-562-11 CORD, CONNECTION (AUDIO) 3-027-153-11 LID, BATTERY CASE (for RMT-CDR45AD) 3-029-170-01 FOOT (SPK) 3-044-713-11 MANUAL, INSTRUCTION (ENGLISH, SPANISH) (AEP, UK, SP) 3-044-713-21 MANUAL, INSTRUCTION (FRENCH, GERMAN) (AEP, SP)
  • Page 72 PMC-DR45L REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision Contents of CORRECTION-1 (to exploded views) included.

Table of Contents