Table of Contents
Advertisement
Steps
1. Place the dummy SIM-card slot filler into its compartment on the palm rest.
NOTE:
Ensure that the dummy SIM-card slot filler is aligned with the ribs on the palm-rest assembly.
2. Press the dummy SIM-card slot filler until it clicks into place and ensure it fits securely into the SIM card slot.
Next steps
1. Install the
fingerprint
2. Install the
smart card
3. Install the
display
assembly.
4. Install the
system
board.
5. Install the
assembly inner
6. Install the battery.
7. Install the
heat
sink.
8. Install the
M.2 2230 solid-state drive in Slot
9. Install the
M.2 2230
or
10. Install the
memory
modules.
11. Install the
WLAN
card.
12. Install the
4G WWAN card
13. Install the
base
cover.
14. Install the
SIM
card.
15. Follow the procedure in
Palm-rest assembly
Removing the palm-rest assembly
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
reader, if applicable.
reader.
frame.
2, if applicable.
M.2 2280
solid-state drive in Slot 1, as applicable.
or
5G WWAN
card, as applicable.
After working inside your
Before working inside your
computer.
computer.
Removing and installing Field Replaceable Units (FRUs)
125
Advertisement
Table of Contents
