Table of Contents
Advertisement
5. Lift and remove the system board from the chassis.
Installing the System Board
1. Insert the system board into the chassis.
2. Connect the I/O board connector to the system board.
3. Connect the eDP cable to the system board.
4. Connect the speakers to the system board.
5. Connect the power connector to the system board.
6. Tighten the screws to secure the system board to the computer.
7. Install:
a)
palmrest assembly
b)
keyboard
c)
memory module
d)
hard drive
e)
WLAN card
f)
access panel
g)
optical disk-drive
h)
battery
20
Removing and Installing Components
Advertisement
Table of Contents
