Related Manuals for Miele KS 4784 Series
Summary of Contents for Miele KS 4784 Series
- Page 1 Operating instructions Refrigerator To avoid the risk of accidents or damage to the appliance it is essen- tial to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 12 543 600...
-
Page 2: Table Of Contents
Contents Warning and Safety instructions..............Caring for the environment ................17 Installation......................19 Installation site..................... 19 Climate range ....................20 Ventilation requirements ..................20 Installing several refrigeration appliances ............21 Side-by-side installation................. 21 Changing the door hinging.................. 21 Fitting supplied wall spacers................22 Installing the refrigeration appliance .............. - Page 3 Sabbath mode .................... 56 Information on Sabbath mode ..............57 Changing the time before the door alarm is triggered ....... 57 Miele@home ....................57 Adjusting the volume of alarms and buzzers /........59 Adjusting the display brightness ............... 60 Switching off demo mode ................60 Resetting the settings to their default settings .........
- Page 4 Contents Cleaning the ventilation gaps ................75 After cleaning ...................... 76 Problem solving guide ..................77 Noises......................... 84 Service........................ 86 Contact in the event of a fault ................86 EPREL database ....................86 Warranty ......................86 EU Conformity declaration ................87 UK Conformity declaration ................
-
Page 5: Warning And Safety Instructions
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating and installation instructions in a safe place... - Page 6 The refrigeration appli- ance is also not suitable for use in areas where there is a risk of ex- plosion. Miele cannot be held liable for damage caused by improper or incor- rect use or operation of the appliance. ...
- Page 7 Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the refri- geration appliance unless they are constantly supervised. Children 8 years and older may only use the appliance unsuper- vised if they have been shown how to use it in a safe way and recog- nise and understand the consequences of incorrect operation.
- Page 8 - Avoid naked flames or anything which creates a spark. - Disconnect the refrigeration appliance from the mains electricity supply. - Ventilate the room where the refrigeration appliance is located for several minutes. - Contact the Miele Customer Service Department.
- Page 9 If the electrical connection cable supplied is damaged, it must only be replaced by an original spare part to prevent a hazard for the user. Miele can only guarantee the safety of the appliance when ori- ginal Miele spare parts are used.
- Page 10 Miele authorised service technician. Otherwise the warranty is invalidated. Faulty components must only be replaced with genuine Miele ori- ginal spare parts. Miele can only guarantee the safety standards of the appliance when Miele replacement parts are used.
- Page 11 The lamp is not suit- able for room lighting. Replacement lamps may only be fitted by a Miele authorised technician or by the Miele Customer Service De- partment. This refrigeration appliance contains several light sources with at least energy efficiency class F.
- Page 12 Warning and Safety instructions Correct use This refrigeration appliance is designed for use within specific am- bient temperatures (climate range). Do not use in ambient temperat- ures for which it is not designed. The climate range is stated on the data plate in the interior cabinet of the refrigeration appliance.
- Page 13 The surface is susceptible to scratching. Even magnets can cause scratching. Accessories and spare parts Only use original Miele accessories. If other parts are used, war- ranty, performance and product liability claims will be invalidated. Miele will guarantee to supply functional spare parts for a min- imum of 10 years and up to 15 years following the discontinuation of...
- Page 14 Warning and Safety instructions Cleaning and care Scratches on the door glass can result in the glass breaking. Do not use abrasive cleaners, hard sponges, brushes or sharp metal tools to clean the door glass. Do not use any oils or grease on the door seals, as these will cause the seals to deteriorate and become porous with time.
- Page 15 Warning and Safety instructions Disposal of your old appliance Children playing could become trapped in the appliance and could suffocate. - Remove the appliance doors. - Remove the drawers. - Leave the adjustable shelves in the refrigeration appliance so chil- dren cannot climb inside.
- Page 16 Warning and Safety instructions Symbol on the compressor (depending on model) This information is only relevant for recycling. There is no risk during normal oper- ation. The oil in the compressor can be fatal if swallowed or if it penet- rates the airways.
-
Page 17: Caring For The Environment
Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged... - Page 18 Caring for the environment in free of charge. Please ensure that your old appliance poses no risk to chil- dren while being stored for disposal.
-
Page 19: Installation
*INSTALLATION* Installation This appliance should be installed in a Installation site dry, well-ventilated room. Risk of damage due to high hu- When deciding on the installation site, midity. please bear in mind that your refriger- In environments with high humidity, ation appliance will use more energy if condensation can build up on ex- installed near to a heater, a cooker or... -
Page 20: Climate Range
*INSTALLATION* Installation Climate range Ventilation requirements This refrigeration appliance is designed Risk of fire and damage due to for use within specific ambient temper- insufficient ventilation. atures (climate range). Do not use in If the refrigeration appliance is not ambient temperatures for which it is not ventilated sufficiently, the com- designed. -
Page 21: Installing Several Refrigeration Appliances
*INSTALLATION* Installation Installing several refrigeration Changing the door hinging appliances Do not change the hinging if this re- frigeration appliance is going to be Risk of damage due to condens- installed side by side with another re- ation on external appliance panels. frigeration appliance. -
Page 22: Fitting Supplied Wall Spacers
*INSTALLATION* Installation Fitting supplied wall spacers Installing the refrigeration ap- pliance The wall spacers supplied must be used in order to achieve declared en- Risk of injury and damage due to ergy consumption values and to pre- the refrigeration appliance tipping vent the build-up of condensation at over. -
Page 23: Aligning The Refrigeration Appliance
*INSTALLATION* Installation Connect the refrigeration appliance to Aligning the refrigeration appliance the electricity supply as described in Risk of damage and injury “Electrical connection”. caused by the appliance door falling Move the refrigeration appliance out or the refrigeration appliance tip- carefully to its intended installation ping over. -
Page 24: Integrating The Refrigeration Appliance In A Run Of Kitchen Units
*INSTALLATION* Installation Integrating the refrigeration appliance in a run of kitchen units The refrigeration appliance can be sur- rounded by kitchen units. K(S)/FN(S)/KFN 4xxx X edst/cs, ws, bst, el Top box Refrigeration appliance, door depth = 75 mm Kitchen unit Wall A = 25 mm (with recessed grip)/60 mm (with handle) Refrigeration appliance with glass front K(S)/FN(S)/KFN 4xxx X obsw/matt, bb,... - Page 25 *INSTALLATION* Installation Install the refrigeration appliance next Risk of fire and damage due to to the kitchen unit. insufficient ventilation. - The appliance front must protrude in If the refrigeration appliance is not front of furniture fronts by at least the ventilated sufficiently, the com- door depth.
-
Page 26: Appliance Dimensions
*INSTALLATION* Installation Appliance dimensions Installation dimensions/View from above KS 4783 ... obsw/matt All dimensions are given in mm. The refrigeration appliance will function correctly if the specified ventilation cross- sections are kept clear. * Dimensions without wall spacers fitted. Appliance depth is increased by 15 mm with the supplied wall spacers fitted. - Page 27 *INSTALLATION* Installation Connections KS 4783 ... obsw/matt All dimensions are given in mm. a View from the front b Mains connection cable, length = 2000 mm A longer mains connection cable is available to order from the Miele Customer Service Department.
- Page 28 *INSTALLATION* Installation Installation dimensions/View from above FNS 4782 ... obsw/matt + KS 4783 ... obsw/matt For more information, see the section “Installation – Side-by-side installation” and the installation instructions supplied with the side-by-side installation kit. All dimensions are given in mm. The refrigeration appliances will function correctly if the specified ventilation cross-sections are kept clear.
- Page 29 *INSTALLATION* Installation Installation dimensions/View from above KS 4783 ... ws, KS 4783 ... edt/cs, KS 4783 ... bst All dimensions are given in mm. The refrigeration appliance will function correctly if the specified ventilation cross- sections are kept clear. * Dimensions without wall spacers fitted. Appliance depth is increased by 15 mm with the supplied wall spacers fitted.
- Page 30 KS 4783 ... ws, KS 4783 ... edt/cs, KS 4783 ... bst All dimensions are given in mm. a View from the front b Mains connection cable, length = 2000 mm A longer mains connection cable is available to order from the Miele Customer Service Department.
- Page 31 *INSTALLATION* Installation Installation dimensions/View from above FNS 4782 ... ws + KS 4783 ... ws, FNS 4782 ... edt/cs + KS 4783 ... edt/cs, FNS 4782 ... bst + KS 4783 ... bst For more information, see the section “Installation – Side-by-side installation” and the installation instructions supplied with the side-by-side installation kit.
- Page 32 *INSTALLATION* Installation Installation dimensions/View from above KS 4783 ... ws N, KS 4783 ... edt/cs N, KS 4783 ... bst N, KS 4784 ... ws N, KS 4784 ... edt/cs N All dimensions are given in mm. The refrigeration appliance will function correctly if the specified ventilation cross- sections are kept clear.
- Page 33 KS 4783 ... ws N, KS 4783 ... edt/cs N, KS 4783 ... bst N, KS 4784 ... ws N, KS 4784 ... edt/cs N All dimensions are given in mm. a View from the front b Mains connection cable, length = 2000 mm A longer mains connection cable is available to order from the Miele Customer Service Department.
- Page 34 *INSTALLATION* Installation Installation dimensions/View from above FNS 4782 ... edt/cs N + KS 4783 ... edt/cs N, FNS 4782 ... ws N + KS 4783 ... ws N, FNS 4782 ... bst N + KS 4783 ... bst (N), FNS 4782 ... edt/cs N + KS 4784 ... edt/cs N, FNS 4782 E ws N + KS 4784 ...
-
Page 35: Electrical Connection
Miele product must also be maintained the cable. in isolated operation or in operation that For safety reasons, do not use an ex- is not synchronised with the mains tension lead or multi-socket adapter. - Page 36 *INSTALLATION* Installation Connecting the refrigeration appli- ance Back of the refrigeration appliance Appliance plug connector Mains plug Plug the plug connector into the socket. Make sure that the plug connector has clicked into position correctly. Insert the plug of the refrigeration ap- pliance into the socket.
-
Page 37: Saving Energy
Saving energy How to save energy: Installation The refrigeration appliance has to cool more often at higher am- site bient temperatures and consumes more energy in the process. Therefore, you should: - Install the refrigeration appliance in a well-ventilated room. - Do not install the refrigeration appliance near to a heat source (heater element, cooker). -
Page 38: Guide To The Appliance
Guide to the appliance Appliance overview This drawing is for illustration purposes only. - Page 39 Guide to the appliance a Display b Interior lighting c Shelf with egg tray in the appliance door d Fan e Shelves in the appliance door f Adjustable shelf g Holder with charcoal filter (Active AirClean) (depending on the model) h Split shelf (FlexiBoard) i Bottle shelf with bottle holder j Flexible bottle rack...
-
Page 40: Control Panel With Start Display
Settings mode d Display for Miele@home connection status (depending on model) (only visible when the Miele@home function has been set up) Settings mode In Settings mode, you can select the following appliance functions and alter their settings to some extent:... - Page 41 Change the time before the door alarm is triggered 1:00 (see “Selecting further settings”) Set up the Miele@home function for the first time, (depend- activate and deactivate WiFi ing on or reset the network configuration model) (see “Selecting further settings”) ...
-
Page 42: Selecting The Desired Function In Settings Mode
Guide to the appliance Selecting the desired function in Settings mode Touch the OK sensor control on the control panel. will appear in the display. Use the or sensor control to scroll to the symbol. Touch OK. ... -
Page 43: Adjusting The Interior Fittings
Guide to the appliance Moving the adjustable shelves Adjusting the interior fittings The shelves can be adjusted according Moving the door shelf/bottle shelf to the height of the food. Only move the door/bottle shelves in the appliance door when they are empty. -
Page 44: Moving The Split Shelf
Guide to the appliance Moving the split shelf Moving a split shelf To accommodate tall items such as The split shelf can be moved to a differ- bottles or large containers, the front ent location inside the appliance. section of the split shelf slides under- ... -
Page 45: Moving The Bottle Rack
Guide to the appliance Moving the bottle rack Space for a baking tray A baking tray can be placed above the drawers. The baking tray can be no more than 466 mm wide, 386 mm deep and 50 mm high. Open the appliance door as far as it will go. -
Page 46: Moving The Charcoal Filters
Guide to the appliance Moving the charcoal filters Accessories supplied KKF-FF charcoal filters with holder Flexible bottle rack (Active AirClean) are available as op- tional accessories (see “Optional ac- Egg tray cessories”). Bottle holder When storing very strong smelling KKF-FF charcoal filter with holder food (e.g. -
Page 47: Optional Accessories
Guide to the appliance KKF-RF replacement charcoal filters Optional accessories (Active AirClean) A range of useful Miele accessories and Replacement filters to the fit the holder care products are available for your ap- are available. We recommend replacing pliance. the charcoal filters every 6 months. -
Page 48: Switching On And Off
“Electrical connection”. To enable the temperature to get suf- Miele will then appear on the appliance ficiently cold inside the refrigeration display, followed by . appliance, allow the appliance to run for a few hours before placing food in it. -
Page 49: Switching Off The Refrigeration Appliance
Switching on and off Switching off for longer periods of Switching off the refrigeration time appliance If, during a long absence, the refri- Touch the OK sensor control on the geration appliance is switched off control panel. but not cleaned and the door is left ... -
Page 50: The Correct Temperature
The correct temperature It is very important to set the correct ... in the refrigerator section temperature to ensure the shelf life of We recommend a temperature of 4 °C food. Reducing the temperature re- in the refrigerator section. duces the growth rate of microorgan- isms. -
Page 51: Temperature Display
The correct temperature If you change the temperature set- Temperature display ting: In normal operation, the temperature check the temperature display after a display shows the current average few hours. It will take this long for the refrigerator section temperature in- appliance to give an accurate read- side the refrigeration appliance. -
Page 52: Using Super Cool And Dynacool
Using Super cool and DynaCool Switching SuperCool on and off SuperCool Touch the OK sensor control on the When switched on, the SuperCool control panel. function can be used to rapidly re- duce the temperature in the fridge will appear in the display. zone to its lowest setting (depending ... -
Page 53: Switching Dynacool On And Off
Using Super cool and DynaCool Switching DynaCool on and off DynaCool Touch the OK sensor control on the When the DynaCool function is not control panel. switched on, the natural circulation of air in the appliance will cause different ... -
Page 54: Selecting Further Settings
Selecting further settings Holiday mode Explanation of the different settings The Holiday mode function is use- ful when you go on holiday, for ex- Only the settings that require further ex- ample, if you do not wish to switch off planation are described below. -
Page 55: Switching On The Lock Function
Selecting further settings Touch the OK sensor control for ap- Switching on the lock function / prox. 6 seconds. When the lock function is switched on, it protects the refrigeration appli- will appear in the display. ance from being switched off inadvert- ... -
Page 56: Sabbath Mode
Selecting further settings Sabbath mode Health risk caused by decom- The refrigeration appliance offers a posing food. Sabbath mode for the purposes of reli- As power failures are not indicated gious observance. while Sabbath mode is active, food may be exposed to increased If Sabbath mode ... -
Page 57: Information On Sabbath Mode
You can set how quickly the door alarm sounds after the appliance door is - The Miele app opened. - A Miele user account You can create In Settings mode , use the or a user account via the Miele app. sensor control to scroll to the The Miele app will guide you as you ... - Page 58 Miele@home availability wish to use (app or WPS). The ability to use the Miele app de- Touch OK. pends on the availability of the After you have successfully logged in, Miele@home service in your country.
-
Page 59: Adjusting The Volume Of Alarms And Buzzers
Use the sensor control to scroll to alarms and buzzers are switched off. the symbol. Touch OK. All entered settings and values for Miele@home are reset to the default settings. The WiFi connection has been deactiv- ated, goes out in the start display. -
Page 60: Adjusting The Display Brightness
- When reporting an appliance fault to Touch OK. the Miele Customer Service Depart- ment (see “Service”). In Settings mode , use the or sensor control to scroll to the - When retrieving information from the symbol. -
Page 61: Cleaning Mode
Selecting further settings The charcoal filter change indicator on the start display will remind you to replace the charcoal filter approx. every 6 months (see “Cleaning and care – Replacing the charcoal filters”). Cleaning mode Cleaning mode makes it easier to clean the fridge zone (see “Cleaning and care”). -
Page 62: Door Alarm
Door alarm Switching the door alarm off early The refrigeration appliance is fitted with a door alarm to avoid increased If you are bothered by the sound of the energy consumption and food becom- alarm, you can switch the alarm off ing warm if the door is left open. -
Page 63: Storing Food In The Fridge Zone
Storing food in the fridge zone Different storage zones Risk of explosion due to flam- mable mixes of gases. Due to natural air circulation, there are Electrical components can cause different temperature regions in the re- flammable mixes of gases to ignite. frigerator section. -
Page 64: Food Which Is Not Suitable For Storage In The Refrigerator Section
Storing food in the fridge zone Coldest area Food which is not suitable for storage in the refrigerator sec- The coldest area in the fridge zone is directly above the DailyFresh drawer tion and at the back of the appliance. Not all food is suitable for refrigeration at temperatures below 5 °C, because it A temperature setting of 4 °C com-... -
Page 65: Storing Food Correctly
Storing food in the fridge zone Storing food correctly Ensure that food stored in the fridge zone is in packaging or covered prop- erly (some exceptions apply in the DailyFresh drawer). This will prevent food odours from af- fecting other food, stop food from dry- ing out and also prevent any cross-con- tamination of bacteria. -
Page 66: Storing Food In The Dailyfresh Drawer
Storing food in the DailyFresh drawer Selecting low humidity The DailyFresh drawer provides good storage conditions for fruit and veget- The appliance is delivered with in- ables. creased humidity and the compart- The humidity level in the DailyFresh ment cover pushed backwards . drawer can also be regulated to suit the Only change this position if the food being stored. - Page 67 Storing food in the DailyFresh drawer Observe the following tips if you find that food you have stored does not keep well (e.g. food becomes limp or wilts after only being stored for a short time): Only place fresh food in the appliance. The initial condition of the food is crucial to maintaining freshness.
-
Page 68: Defrosting
Defrosting Fridge zone and DailyFresh drawer The fridge zone and the DailyFresh drawer defrost automatically. Condensate and frost can build up on the back wall of the fridge zone and the DailyFresh drawer whilst the com- pressor is running. You do not need to remove this. -
Page 69: Cleaning And Care
Cleaning and care Cleaning agents The data plate located inside the in- terior cabinet of the refrigeration appli- Cleaning and conditioning agents ance must not be removed. It contains used in the interior cabinet of the re- information which is required in the frigeration appliance must be food event of a fault. -
Page 70: Preparing The Refrigeration Appliance For Cleaning
Cleaning and care Preparing the refrigeration ap- Cleaning the inside of the ap- pliance for cleaning pliance Tip: Switch Cleaning mode on. The The refrigeration appliance should be cooling system in the fridge zone is cleaned regularly (at least once a switched off, but the interior lighting re- month). -
Page 71: Cleaning Accessories By Hand Or In The Dishwasher
Cleaning and care - The door and bottle shelves in the Cleaning accessories by hand appliance door (without stainless or in the dishwasher steel trim) The following components must be - Adapters for the split shelf cleaned by hand only: - Adjustable shelves (without the trim - The stainless steel trim or printing) - Page 72 Cleaning and care Dismantling an adjustable shelf Risk of damage as a result of in- Remove the trim before cleaning the correct cleaning. adjustable shelf. Proceed as follows: The telescopic rails contain a special lubricant which can be washed out ...
- Page 73 The symbol in the start display re- minds you to replace the charcoal filter. Replacement KKF-RF charcoal filters can be obtained from the Miele Cus- tomer Service Department, from your Remove the dividing plate. dealer or from Miele’s website.
-
Page 74: Cleaning The Front Of The Appliance And The Side Panels
Cleaning and care Cleaning the front of the appli- ance and the side panels If soiling is left on for any length of time, it may become impossible to remove. Surfaces may suffer discol- ouration or damage. Therefore, it is best to remove soiling from the appliance front and side panels immediately. -
Page 75: Cleaning The Door Seal
This finish is resistant to brush or vacuum cleaner (you could soiling and is very easy to clean. use a Miele vacuum cleaner dusting brush, for example). Appliance with matt black glass front ... -
Page 76: After Cleaning
Cleaning and care After cleaning Touch the OK sensor control on the control panel. will appear in the display. Touch OK. When Cleaning mode is switched off, the dot in the upper corner of the display goes out. Use the and sensor controls to scroll to the symbol and touch OK. -
Page 77: Problem Solving Guide
You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. Information to help you rectify faults yourself can be found at www.miele.com/ser- vice. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it. - Page 78 Check whether the door seal is damaged. The door seal is dam- No tools are required to change the door seal. aged or needs to be re- Change the door seal. A replacement is available placed. from Miele or from specialist retailers.
- Page 79 Problem solving guide Other problems Problem Cause and remedy The floor of the refriger- The condensate drain hole is blocked. ator section is wet. Clean the condensate channel and drain hole. There is no audible This is not a fault. The alarm was switched off in Set- alarm even though the tings mode.
- Page 80 lights up on the dis- Demo mode has been activated. play, the refrigeration Touch OK. appliance does not get Miele will appear initially in the display, followed by cold even though the the start screen. controls and the interior ...
- Page 81 Problem solving guide Message Cause and remedy is lit up on the dis- The lock function has been activated. play and the appliance Unlock the refrigeration appliance temporarily or cannot be used. switch the lock function off completely (see “Se- lecting further settings –...
- Page 82 F Switch the alarm off by tapping OK. with numbers may ap- Contact the Miele Customer Service Department. pear. An alarm will also To report the fault, you need the fault code and also sound.
- Page 83 When removing the lighting cover, there is a risk of coming into contact with live electrical components. Do not remove the lighting cover. The LED lighting may only be repaired or re- placed by the Miele Customer Service Department. Risk of injury from LED lighting.
-
Page 84: Noises
Noises The refrigeration appliance is producing various noises during operation. If the cooling performance is low, the refrigeration appliance will conserve energy but operate for longer. The volume will be lower. Food will be chilled faster if the cooling performance is high. The volume will be higher. - Page 85 Noises Noises Cause and remedy Vibrating, rattling, The refrigeration appliance is uneven. Use a level to clinking check and adjust the alignment of the refrigeration ap- pliance by raising or lowering the adjustable feet under- neath the refrigeration appliance. The refrigeration appliance is touching another appli- ance or piece of furniture.
-
Page 86: Service
Miele dealer or Miele Customer Service. The model identifier can be found on You can book a Miele Customer Ser- the data plate inside the refrigeration vice call-out online at www.miele.com/ appliance or, depending on the model, service. -
Page 87: Eu Conformity Declaration
EU Conformity declaration Miele hereby declares that this refriger- ator complies with Directive 2014/53/ The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.ie - For service, information, operating in- structions etc: go to https:// miele.co.uk/manuals and enter the... -
Page 88: Uk Conformity Declaration
UK Conformity declaration Miele hereby declares that this refriger- ator complies with UK Radio Equipment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk... -
Page 89: Copyrights And Licences
Copyrights and licences For the purpose of operating and controlling the communication module, Miele uses proprietary or third-party software that is not covered by open source licens- ing terms. This software/these software components are protected by copyright. The copyrights held by Miele and third parties must be respected. - Page 91 United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk, E-mail: info@miele.co.uk Australia Ireland Singapore Miele Australia Pty. Ltd. Miele Ireland Ltd. Miele Pte. Ltd. ACN 005 635 398 2024 Bianconi Avenue...
- Page 92 KS 4783 ..., KS 4784 ... en-GB M.-Nr. 12 543 600 / 00...