Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele KS 35222 iD
Summary of Contents for Miele KS 35222 iD
- Page 1 Operating and installation instructions Refrigerator with Dynamic cooling K(S) 35222 iD K(S) 37222 iD en - GB To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time.
-
Page 2: Table Of Contents
Contents Guide to the appliance ..........4 Optional accessories . - Page 3 Contents Automatic defrosting ..........31 Cleaning and care .
-
Page 4: Guide To The Appliance
Guide to the appliance Control panel a On/Off button c Display b Super cool button d Menu symbol (Settings mode: For activating and deactivating the lock) e Super cool symbol f Lock symbol g Temperature display h Temperature selector button i Dynamic cooling button (automatic temperature distribution) - Page 5 Guide to the appliance a Control panel b Fan c Door shelf / Egg tray d Adjustable shelf e Interior lighting f Bottle shelf g Condensate channel and drain hole h Fruit and vegetable drawers* * Depending on model This drawing is for illustration purposes only.
-
Page 6: Optional Accessories
Guide to the appliance Optional accessories Optional accessories are available from Miele or via the internet. Bottle rack Bottles can be stored horizontally using the bottle rack to save space. The bottle rack can be placed at different positions in the appliance. -
Page 7: Caring For The Environment
Caring for the environment Disposal of the packing Disposal of your old appliance material Electrical and electronic appliances often contain valuable materials. They The packaging is designed to protect also contain materials which, if handled the appliance from damage during or disposed of incorrectly, could be transportation. -
Page 8: Warning And Safety Instructions
They contain important information on installation, safety, use and maintenance. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions. Keep these instructions in a safe place and ensure that new users are familiar with the content. - Page 9 The appliance is also not suitable for use in areas susceptible to explosion. Miele cannot be held liable for any damage resulting from incorrect or improper use or operation. The appliance can only be used by people with reduced...
- Page 10 Warning and Safety instructions Danger of suffocation. Packaging, e.g. plastic wrappings, must be kept out of the reach of babies and children. Whilst playing, children could become entangled in packaging or pull it over their head and suffocate. Technical safety The coolant system is tested for leaks.
- Page 11 If the electrical connection cable is faulty it must only be replaced by a Miele approved service technician to protect the user from danger. Do not connect the appliance to the mains electrical supply by a multi-socket adapter or extension lead.
- Page 12 Unauthorised installation, maintenance and repairs can cause considerble danger to users. Installation, maintenance and repair work must only be carried out by a Miele authorised technician. While the appliance is under guarantee, repairs should only be undertaken by a Miele authorised service technician. Otherwise the guarantee is invalidated.
- Page 13 Warning and Safety instructions Correct use The appliance is designed for use within certain climate ranges (ambient temperatures), and should not be used outside this range. The climate range of the appliance is stated on the data plate inside the appliance. Installing it in a room with too low an ambient temperature will lead to the appliance switching off for longer periods so that it cannot maintain the required temperature.
- Page 14 Only use genuine original Miele accessories with this appliance. Using spare parts or accessories from other manufacturers will invalidate the guarantee, and Miele cannot accept liability.
- Page 15 Warning and Safety instructions Disposal of your old appliance Before disposing of an old appliance, first make the door latch or lock unusable. This way you will prevent children from accidentally locking themselves in and endangering their lives. Be careful not to damage any part of the pipework whilst awaiting disposal, e.g.
-
Page 16: How To Save Energy
How to save energy Normal energy Increased energy consumption consumption Installation site / In a ventilated room. In an enclosed, unventilated Maintenance room. Protected from direct In direct sunlight. sunlight. Not near to a heat source Near to a heat source (radiator, oven). - Page 17 How to save energy Normal energy Increased energy consumption consumption Drawers, shelves and racks arranged as they were when the appliance was delivered. Only open the door when Frequent opening of the door necessary and for as short a for long periods will cause a time as possible.
-
Page 18: Switching On And Off
Switching on and off Before using for the first time Switching on Protective foil The stainless steel trim to the interior shelves and the door shelves has a layer of protective foil to prevent ^ Press the On/Off button. damage during transportation. The temperature display lights up, the ^ Carefully remove the protective foil appliance starts cooling and the interior... -
Page 19: Switching Off For Longer Periods Of Time
Switching on and off Switching off for longer periods of time If the appliance is not going to be used for a longer period of time, e.g. whilst on holiday: ^ switch the appliance off, ^ disconnect it from the mains, ^ clean the appliance out and ^ leave the door ajar to air the appliance. -
Page 20: The Correct Temperature
The correct temperature . . . in the refrigerator It is very important to set the correct temperature for storing food in the We recommend a temperature of 4°C in appliance. Micro-organisms will cause the refrigerator. food which is not stored at the correct temperature to deteriorate rapidly. -
Page 21: Temperature Display
The correct temperature Temperature display The temperature display on the control panel always shows the required temperature. ^ Press the temperature selector button repeatedly until the temperature you Setting the temperature want lights up in the display. If the appliance door is opened very The first time you press the button the often, or if large quantities of food are last temperature selected will flash in... -
Page 22: Selecting Settings
Selecting settings Settings mode The lock is activated or deactivated in Settings mode. ^ Press the Super cool button briefly to Activating or deactivating the call up the lock function. lock c1 will appear in the display. Settings mode is represented in the display by the Menu symbol X. - Page 23 Selecting settings – To deactivate the lock ^ Press the Super cool button for approx. five seconds. The Lock symbol 0 and the Menu symbol X will light up and c will flash in the display. Settings mode is now activated. ^ Press the Super cool button briefly to call up the lock function.
-
Page 24: Using Super Cool And Dynamic Cooling
Using Super cool and Dynamic cooling Super cool Dynamic cooling The Super cool function can be used to When the Dynamic cooling function is rapidly reduce the temperature in the not switched on, the natural circulation refrigerator to its lowest setting of air in the appliance will cause (depending on the room temperature). - Page 25 Using Super cool and Dynamic cooling Switching on Dynamic cooling ^ Press the Dynamic cooling button briefly. The Dynamic cooling symbol ¢ will light up. The Dynamic cooling fan is now ready to operate. It will switch on automatically when the compressor switches on.
-
Page 26: Storing Food In The Refrigerator
Storing food in the refrigerator Different storage zones Warmest area Due to the natural circulation of the air The warmest area is in the top section in the appliance, there are different at the front and in the door. Use this for temperature zones in the refrigerator. -
Page 27: Food Which Is Not Suitable For Storing In The Refrigerator
Storing food in the refrigerator Food which is not suitable for Do not store explosive materials in storing in the refrigerator the appliance or any products Not all food is suitable for storing in a containing propellants (e.g. spray refrigerator at temperatures below 5 °C, cans). -
Page 28: When Shopping For Food
Storing food in the refrigerator When shopping for food Storing food correctly The freshness of food when first placed Food should generally be stored in the appliance is an important factor covered or packaged. This will prevent in determining how long it stays fresh, food smells from affecting other food, and how long it can be kept in the food from drying out, and also any... -
Page 29: Adjusting The Interior Fittings
Adjusting the interior fittings Adjusting the door shelf/bottle Moving the shelves shelf The shelves can be adjusted according ^ Push the door/bottle shelf upwards, to the height of the food. then remove it by pulling it forwards. ^ Raise the shelf slightly at the front, and pull it forwards a little until the ^ Replace the door/bottle shelf at the notch at the side is in line with the... - Page 30 Adjusting the interior fittings Fruit and vegetable drawer (depending on model) The fruit and vegetable drawer is on telescopic runners, and can be removed for filling, emptying or cleaning purposes. ^ Pull out the drawer as far as it will go, and then lift it up and out.
-
Page 31: Automatic Defrosting
Automatic defrosting The refrigerator section defrosts automatically. Condensate and frost can build up on the back wall of the refrigerator section whilst the compressor is running. You do not need to remove this, as it will defrost and evaporate automatically with the warmth generated by the compressor. -
Page 32: Cleaning And Care
Cleaning and care – sharp metal scrapers. Do not let water get into the electronic unit or into the light. Before cleaning ^ Switch off the appliance. Do not let water get into the condensate channel and drain hole The display will go out and the when cleaning. -
Page 33: Cleaning The Interior And Accessories
Cleaning and care Cleaning the interior and The following are not dishwasher safe: accessories – the stainless steel trim and the protective strips on the shelves The appliance should be cleaned – the fruit and vegetable regularly, at least once a month. containers/drawers (depending on model). - Page 34 Cleaning and care After cleaning ^ Replace all shelves and accessories in the appliance. ^ Close the door. ^ Reconnect to the mains and switch the appliance back on. ^ Switch on the Super cool function for a while so that the appliance can cool down quickly.
-
Page 35: Problem Solving Guide
Problem solving guide Some minor problems can be corrected without contacting Miele. The following overview is designed to help you resolve these yourself. If having followed the suggestions below, you still cannot resolve the problem, please contact Miele. To prevent unnecessary loss of temperature it is advisable not to open the door of the appliance while waiting for it to be serviced. - Page 36 Problem solving guide The compressor is switching on too frequently and for too long, so the temperature in the appliance is dropping. Problem Possible cause Remedy ^ Set the correct The temperature The temperature inside the temperature setting. inside the appliance appliance is set too low.
- Page 37 Problem solving guide Problem Possible cause Remedy ^ Uncover the ventilation The compressor The ventilation gaps in the gaps. switches on too housing unit are covered or frequently and for dusty. ^ Dust the ventilation gaps longer. regularly. ^ Only open the door when The appliance door has been opened too frequently, you need to and then only...
- Page 38 ^ Check the temperature again in 24 hours time. Messages in the display Problem Possible cause Remedy F0 to F9 appears in ^ Call Miele Service. There is a fault. the display.
- Page 39 The LED lighting may only automatically after approx. be repaired or replaced by 15 minutes if the door is left a Miele service technician. open. There are live electrical If this is not the case, then components under the there is a fault.
- Page 40 Problem solving guide Other problems Problem Possible cause Remedy ^ Deactivate the lock (see You cannot switch The lock has been activated. The 0 symbol will "Selecting settings - To the appliance off. deactivate the lock"). appear in the display. This is normal and does not The external side This is not a fault.
-
Page 41: Noises
Noises Normal noises What causes them Humming noise made by the motor (compressor). This noise Brrrrr... can get louder for brief periods when the motor is switching on. Blubb, blubb..A gurgling noise can be heard when coolant is circulating through the pipes. -
Page 42: After Sales / Guarantee
In the event of a fault which you cannot correct yourself, or if the appliance is under guarantee, please contact: – your Miele Dealer – Miele (see back cover for contact details). Please note that telephone calls may be monitored and recorded for training purposes. -
Page 43: Note For Test Institutes
Note for test institutes Testing must be carried out in accordance with the relevant Norms and Directives. In addition, the following manufacturer's instructions should be observed when preparing and carrying out tests: – Loading plans, – Instructions in the Operating and installation instructions. -
Page 44: Electrical Connection
Electrical connection Electrical connection U.K. If the connection cable has to be replaced, this must be done by a All electrical work should be carried out suitably qualified and competent by a suitably qualified and competent person. person in strict accordance with current local and national safety regulations Do not plug other appliances in behind (BS 7671 in the UK). -
Page 45: Installation
This can cause corrosion Side-by-side of the appliance walls. KS 35222 iD, KS 37222 iD refrigerators For prevention, it is advisable to have two foamed in side-wall heaters install the appliance with sufficient... -
Page 46: Ventilation
Installation Ventilation – The cross-sectional area for ventilation in the plinth and the Specified ventilation gaps must be housing unit and also beneath the maintained. Otherwise the ceiling needs to be at least 200 cm compressor will come on more throughout to ensure that warm air frequently and for longer, resulting in can be drawn through unhindered. -
Page 47: Before Installing The Appliance
Installation Before installing the appliance ^ Take the accessory pack which includes installation parts and other accessories out of the appliance and remove the packaging strap holding the door in place. ^ Do not remove the following from the back of the appliance: ^ Open the appliance door, and remove the red safety catch a (depending on model). -
Page 48: Does Your Old Appliance Have A Different Hinging Mechanism
All the necessary parts are supplied or can be ordered from the Miele. Stainless steel front panel (depending on model) The old door front can be replaced by a stainless steel front panel if required. -
Page 49: Building-In Dimensions
Building-in dimensions Before installing the appliance make sure the housing unit is the correct size. Specified ventilation gaps must be maintained in order to ensure that the appliance functions correctly. Niche height [mm] K(S) 35222 iD 1397 – 1413 K(S) 37222 iD 1772 –... -
Page 50: Adjusting The Door Hinges
Adjusting the door hinges The door hinges are set ex-works to enable the door to be opened wide. However, if the opening angle of the door needs to be limited for any reason, the hinge can be adjusted to accommodate this. –... -
Page 51: Changing The Door Hinging
Changing the door hinging Two people are needed for changing the door hinging. The appliance is supplied right-hand hinged. If left-hand door hinging is required, follow the instructions below. To change the door hinging you will need the following tools: ^ Open the appliance door. - Page 52 Changing the door hinging ^ Place the dismantled door with the outer side facing upwards on a stable surface. Do not close the hinges. Danger of injury. ^ Undo screws d completely. ^ Fit bracket g to the opposite side ^ Unscrew screw h completely.
- Page 53 Changing the door hinging ^ Push appliance door f onto pre-fitted screws d and , and tighten screws d and securely. ^ Replace covers a, b and c. ^ Replace the locking pins into the top of the hinges to prevent the door opening too far.
-
Page 54: Building In The Appliance
Building in the appliance To install the appliance you will need Two people are needed for installing the following tools: this appliance. ^ The appliance must be installed in stable and correctly aligned kitchen furniture on a level surface. ^ The housing unit must be secured against the risk of tipping. -
Page 55: Preparing The Appliance
Building in the appliance The following installation parts are – required for fitting the furniture required door: All installation parts are number coded. This coding is also used in the installation instructions. – required for installing the appliance in its housing unit: All fitting instructions given are for a right-hand hinged appliance. - Page 56 Building in the appliance ^ Push the appliance two-thirds of the way into its niche. When doing this, make sure that the mains cable does not get trapped. Tip to help you push it into position: Secure a length of string to the plug to "increase"...
- Page 57 Building in the appliance Niche height 140 cm and above ^ Screw in adjustable feet l completely. ^ Remove cover f. ^ Secure part g using screws h loosely into the top left-hand side of the appliance. Do not tighten the screws so that you can adjust the position of this part.
- Page 58 Building in the appliance Building in the appliance ^ Push the appliance into the niche until the fixing brackets at all four corners are in line with the front edge of the furniture side wall. ^ Carefully remove the protective foil from sealing strip m.
-
Page 59: Securing The Appliance In The Niche
Building in the appliance ^ Check the position of the fixing If the all round gap of 42 mm is not bracket at the top and bottom front maintained between the appliance edge of the furniture side wall again. casing and the front edge of the This will create a gap all round of housing unit side walls the door may 42 mm to the front edges of the... - Page 60 Building in the appliance ^ Snap off any protruding ends from the fixing bracket. They are no longer required. ^ Replace covers f and u on the fixing brackets. ^ Push the loose bracket up against the furniture wall. ^ Attach fixing bracket j to the housing unit side wall with screw s.
- Page 61 Building in the appliance Niche height 140 cm and above For additional stability of the appliance in the unit, push the rods supplied in underneath the appliance between it and the floor of the housing unit. ^ Then secure handle v to one of the rods w.
-
Page 62: Fitting A Furniture Door
When fitting large or divided furniture The furniture door must be fitted doors an extra fitting kit or set of correctly and not under tension. fixing brackets should be used. These are available to order from Miele. - Page 63 Building in the appliance Tip: Push fitting aids b together with the furniture front up to the height adjoining unit furniture doors. ^ A gap of 8 mm is set ex-works between the appliance door and the fixing bracket. Double check this gap and reset it if necessary.
- Page 64 Building in the appliance ^ Place the furniture door with the outer side downwards on a stable surface. ^ Fit the side cover q over the fixing bracket on the hinge side. ^ Turn the furniture door over and fix the handle if required.
- Page 65 Building in the appliance ^ Open the appliance door. Aligning the door ^ Hang the furniture door onto adjusting bolts h. ^ Loosely attach nuts c on the adjusting bolts. ^ Close the door and check the – Side adjustments (X) distance between the door and ^ Slide the furniture door.
- Page 66 Building in the appliance ^ Drill holes l in the furniture door and fit screws m. ^ Whilst counterholding adjusting bolts Make sure the two metal edges are h with a screwdriver, tighten nuts c aligned (Symbol II). on the appliance door with ring ^ Close both doors.
- Page 67 Building in the appliance ^ Tighten all screws again. To make sure the appliance is correctly fitted: – The doors must close properly. – The doors must not touch the housing unit. – The seal at the top edge of the handle side must fit properly.
- Page 68 Alteration rights reserved / 0613 M.-Nr. 09 485 690 / 00 K(S) 35222 iD, K(S) 37222 iD...