Table of Contents
Advertisement
TIME SETTINGS
There are 3 timer settings with audio beep indicator. These different
settings will give different curl effects. The longer the time the hair is
held inside the curl chamber, the more defined the curl will be. But
results will also vary according to hair type. Use the following as a
guide.
• Setting 8 (8 seconds = 3 beeps) - for loose waves
• Setting 10 (10 seconds = 4 beeps) - for soft curls
• Setting 12 (12 seconds = 5 beeps) - for more defined curls
NOTE: When in timer mode after the beeps finish, if the curler is kept
shut, after a few moments the mains indicator will flicker and a single
continuous beep will be emitted until the curl is released.
AUDIO OFF SETTING
Slide the timer switch to '0'. When the '0' setting is selected there will
be no beep indicator to advise when to release the styler. Take extra
care when using this setting.
CURL DIRECTION SETTING (Right/Left/Auto)
Use the Curl direction control to choose either a uniform or natural
finish. Select the curl direction by sliding the switch to either left 'L' or
right 'R'. When styling the left side of the hair, slide the curl direction
switch to the left position - 'L'. When styling the right side of the hair,
slide the switch to the right position - 'R'. This ensures that the curl
sits towards the face on both sides of the head and will give a more
uniform style. For a more natural look then select the auto setting 'A'.
This will alternate the direction after each curl.
SLEEP MODE
This appliance has an automatic sleep mode feature. If the styler is not
used for more than 20 minutes the temperature will automatically drop
down to around 150°C. If you wish to continue using the styler after
Advertisement
Table of Contents
