Table of Contents
Advertisement
Figure 129. Installing the fan cage module
3. Push the fan cage module into the chassis until the handles touch the middle plane.
NOTE:
Ensure that the rear fan cage is level and not slanted.
4. Rotate the left and right handles inward by hand.
5. Using a Phillips 2 screw driver, tighten the two thumb screws on the rear fan cage.
Next steps
1.
Install GPU
fan(s).
2. Follow the procedure listed in
GPU tray
Removing the GPU tray
The procedure to remove the H100 GPU and A100 GPU is same.
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Remove rear GPU
fan(s).
4.
Remove the GPU fan
CAUTION:
Ensure that two people operate the GPU tray due to its heavy weight.
Steps
1. Using a Phillips 2 screwdriver, release ten capture screws on both side of the chassis.
After working inside your
Safety
Before working inside your
cage.
system.
instructions.
system.
Installing and removing system components
157
Advertisement
Table of Contents
