Table of Contents
Advertisement
Configuring IP Addresses
Parameter
Local IP
Address
Subnet Mask
Default Router
Primary DNS
Secondary DNS Secondary Domain Name Server IP address used by the HiPath
When the Static option is checked, the HiPath AP 1140
uses the IP address in the corresponding Static/DHCP
failure field.
The IP Configuration section sets the general IP addresses used
by the HiPath AP 1140.
Figure 9: IP Configuration Section
The following table describes the parameters that can be set:
IP address of the HiPath AP 1140.
Subnet mask IP address used by the HiPath AP 1140. The subnet
mask enables the network administrator to further divide the host
part of the address into two or more subnets.
Default router IP address used by the HiPath AP 1140. A router is a
device that connects any number of LANs.
Primary Domain Name Server IP address used by the HiPath
AP 1140. A DNS is an Internet service that translates domain names
into IP addresses.
AP 1140. A DNS is an Internet service that translates domain names
into IP addresses.
Basic Configuration
Definition
27
Advertisement
Table of Contents
