Cisco VG224 - Analog Phone Gateway Hardware Installation Manual page 42

Voice gateway

Hide thumbs Also See for VG224 - Analog Phone Gateway:

Table of Contents

Wall-Mounting the Chassis

Note

For attaching to a wall stud, each bracket requires two #10 wood screws (round- or pan-head) with #10

washers, or two #10 washer-head screws. The screws must be long enough to penetrate at least 3/4 inch

(20 mm) into supporting wood or metal wall stud.

For hollow-wall mounting, each bracket requires two wall anchors with washers. Wall anchors and

Note

washers must be size #10.

Figure 3-8

•

Figure 3-8

Cisco VG224 Voice Gateway Hardware Installation Guide

3-10

shows the orientation required for installation.

Wall-Mounting the Chassis

Chapter 3

Installing the Cisco VG224 Voice Gateway

OL-5006-04

Table of Contents

Show Quick Links

Table of Contents

Troubleshooting