Mounting Tools And Equipment; Unpacking And Inspection - Cisco VG224 - Analog Phone Gateway Hardware Installation Manual
Voice gateway
Hide thumbs
Also See for VG224 - Analog Phone Gateway:
- Software manual (66 pages) ,
- Quick start manual (21 pages) ,
- Manual (10 pages)
Table of Contents
Advertisement
Chapter 3
Installing the Cisco VG224 Voice Gateway
Mounting Tools and Equipment
Obtain the following tools and parts to install a Cisco VG224 voice gateway:
•
•
•
•
•
In addition, you might need the following external equipment:
•
•
•
•
•
•
Unpacking and Inspection
Do not unpack the Cisco VG224 until you are ready to install it. If the installation site is not ready, keep
the chassis in its shipping container to prevent accidental damage.
The Cisco VG224, cables, printed publications, and any optional equipment you ordered might be
shipped in more than one container. When you unpack each shipping container, check the packing list
to ensure that you received all the following items:
•
•
•
•
•
•
•
•
•
Inspect all items for shipping damage. If anything appears damaged, or if you encounter problems when
installing or configuring your system, contact a customer service representative. (See the
Technical Assistance" section on page
OL-5006-04
Standard flat-blade screwdriver as required for attaching brackets to rack or wall
Phillips screwdriver for attaching brackets to a Cisco VG224 voice gateway
Mounting brackets and screws for 24-inch rack, if required
Four telco machine screws, for installing the chassis in a rack (use the screw size required by
–
the rack)
Screws and anchors for wall-mounting, if required
Eight wood screws or other fasteners, for installing the chassis on a wall. An additional starter
–
screw can be used to facilitate wall-mounting.
ESD-preventive wrist strap
Console terminal, or personal computer with terminal emulation software
PC running terminal emulation software for administrative access
Modem for remote access
Analog voice RJ-21 cable
Ethernet switch
Modem for remote configuration
Cisco VG224
Power cord, 6-foot (1.8-meter)
RJ-45-to-DB-25 adapter cable (labeled Console)
RJ-45-to-DB-9 adapter cable (labeled Auxiliary)
Rack-mounting brackets for 19-inch rack (one pair) with screws for attaching to chassis
Chassis guard for wall-mounting applications
Grounding lug and fasteners
Cisco VG224 Voice Gateway Quick Start Guide
Cisco VG224 Voice Gateway Regulatory Compliance and Safety Information
16.)
Cisco VG224 Voice Gateway Hardware Installation Guide
Mounting Tools and Equipment
"Obtaining
3-5
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
