Table of Contents
Advertisement
show boot
Table 2-12
show boot Field Descriptions
Field
BOOT path-list
Config file
Private Config file
Enable Break
Manual Boot
Helper path-list
Catalyst 2350 Switch Command Reference
2-226
Description
Displays a semicolon separated list of executable files to try to load and execute when
automatically booting.
If the BOOT environment variable is not set, the system attempts to load and execute
the first executable image it can find by using a recursive, depth-first search through the
flash file system. In a depth-first search of a directory, each encountered subdirectory
is completely searched before continuing the search in the original directory.
If the BOOT variable is set but the specified images cannot be loaded, the system
attempts to boot the first bootable file that it can find in the flash file system.
Displays the filename that Cisco IOS uses to read and write a nonvolatile copy of the
system configuration.
Displays the filename that Cisco IOS uses to read and write a nonvolatile copy of the
system configuration.
Displays whether a break during booting is enabled or disabled. If it is set to yes, on, or
1, you can interrupt the automatic boot process by pressing the Break key on the console
after the flash file system is initialized.
Displays whether the switch automatically or manually boots. If it is set to no or 0, the
boot loader attempts to automatically boot up the system. If it is set to anything else,
you must manually boot up the switch from the boot loader mode.
Displays a semicolon separated list of loadable files to dynamically load during the boot
loader initialization. Helper files extend or patch the functionality of the boot loader.
Chapter 2 Catalyst 2350 Cisco IOS Commands
OL-19055-01
Advertisement
Chapters
Table of Contents
