Table of Contents
Advertisement
Chapter 2 Catalyst 2350 Cisco IOS Commands
transceiver [detail |
properties |
dom-supported-list]
trunk
| begin
| exclude
| include
expression
Note
Though visible in the command-line help strings, the crb, fair-queue, irb, mac-accounting,
precedence, random-detect, rate-limit, and shape keywords are not supported.
Command Modes
Privileged EXEC
Command History
Release
12.2(46)EY
Usage Guidelines
The show interfaces capabilities command with different keywords has these results:
•
•
•
•
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
OL-19055-01
(Optional) Display the physical properties of a coarse wavelength-division
multiplexer (CWDM) or dense wavelength-division multiplexer (DWDM)
small form-factor (SFP) module interface. The keywords have these
meanings:
detail—(Optional) Display calibration properties, including high and
•
low numbers and any alarm information.
•
properties—(Optional) Display speed and duplex settings on an
interface.
•
dom-supported-list—(Optional) Display the supported Digital Optical
Monitoring (DOM) SFP modules.
Display interface trunk information. If you do not specify an interface, only
information for active trunking ports appears.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Use the show interface capabilities module 1 command to display the capabilities of all interfaces
on the switch. Any other number is invalid.
Use the show interfaces interface-id capabilities to display the capabilities of the specified
interface.
Use the show interfaces capabilities (with no module number or interface ID) to display the
capabilities of all interfaces on the switch.
Use the show interface switchport module 1 to display the switch port characteristics of all
interfaces on the switch. Any other number is invalid.
Catalyst 2350 Switch Command Reference
show interfaces
2-277
Advertisement
Chapters
Table of Contents
