Cisco WS-C3560E-24PD-E Command Reference Manual page 371

Catalyst 3560 series switch

Table of Contents

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands

To return to policy-map configuration mode, use the exit command. To return to privileged EXEC mode,

use the end command.

This example shows how to assign DSCP 10 to all FTP traffic without any policers:

Switch(config)# policy-map policy_ftp

Switch(config-pmap)# class ftp_class

Switch(config-pmap-c)# set dscp 10

Switch(config-pmap)# exit

You can verify your settings by entering the show policy-map privileged EXEC command.

Related Commands

show policy-map

Defines a traffic classification match criteria (through the police, set, and trust

policy-map class configuration commands) for the specified class-map name.

Defines a policer for classified traffic.

Creates or modifies a policy map that can be attached to multiple ports to

specify a service policy.

Displays QoS policy maps.

Defines a trust state for traffic classified through the class policy-map

configuration command or the class-map global configuration command.

Catalyst 3560 Switch Command Reference

Show Quick Links

Table of Contents