hit counter script
Download Print this page

Cisco CISCO887W-GN-A-K9 Datasheet page 13

880 series integrated services routers

Advertisement

G.SHDSL (EFM mode) specifications (Cisco
888E)
Table 12.
DSLAM
Siemens HIX 5300
ECI 480
Alcatel ASAM 7300
Table 13.
DSLAM
Alcatel ASAM 7300
ECI 480
Ericsson
Huawei 5600
Lucent Stinger
Table 14.
DSLAM
ZTE 9806
Huawei MA5600
Table 15.
DSLAM
ECI Hi-Focus SAM 480
Alcatel ASAM7300
Lucent Stinger
Siemens Hix-5300
Table 16.
DSLAM
Huawei 5603
Alcatel ISAM 7302
Hatteras HN4000e
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
ADSL-over-ISDN DSLAM Interoperability for Cisco 886
ADSL2/2+ over ISDN Line-Card Chipset
Infineon
Infineon
Globespan
ADSL over Basic Telephone Service DSLAM Interoperability for Cisco 887 and 887M
ADSL2/2+ over Basic Telephone Service Line-
Card Chipset
Broadcom (Annex A and Annex M)
Infineon (Annex A and Annex M)
Broadcom (Annex A and M)
Globespan (Annex A only)
Globespan (Annex A and Annex M)
VDSL2 DSLAM Interoperability for Cisco 887V
VDSL2 over POTS Line Card Chipset
Broadcom
Broadcom
G.SHDSL DSLAM Interoperability for Cisco 888
G.SHDSL (2 wire and 4 wire) Line Card Chipset
Infineon
Conexant / Ikanos
Conexant / Ikanos
Infineon
G.SHDSL DSLAM Interoperability for Cisco 888E
G.SHDSL (2- and 4-wire) Line-Card Chipset
Infineon
Infineon
Infineon
● Conexant / Ikanos ChipsetSupports 2-wire mode
● Offers symmetrical WAN speeds up to 2.304 Mbps over a single copper pair and up to 4.608
Mbps over two copper pairs using ITU-T G.991.2 Annex A and Annex B
● Offers symmetrical WAN speeds from 768 kbps to 5.696 Mbps over a single copper pair using
ITU-T G.991.2 Annex F and Annex G
● Offers symmetrical WAN speeds up to 22.784 Mbps over four copper pairs using IEEE
802.3ah EFM bonding
● Supports wetting current (Section A.5.3.3 of G.991.2)
● Supports dying gasp; uses power status bit (Section 7.1.2.5.3 of G.991.2) for signaling
● Supports rate adaption
Data Sheet
Page 13 of 16

Advertisement

loading