One USB 1.1 port for security eToken credentials, booting from USB, and loading configuration
●
Easy setup, deployment, and remote-management capabilities through web-based tools and Cisco IOS
●
Software
Figure 1 shows a Cisco 881 Integrated Services Router.
Figure 1.
Tables 1 and 2 list the routers that currently make up the Cisco 880 data and SRST series, respectively.
Table 1.
Models
Cisco 881
Cisco 886
Cisco 887
Cisco 887V
Cisco 888
Cisco 888E
Table 2.
Models
Cisco 881 SRST
Cisco 888 SRST
The Cisco 880 Series is ideal for small branch offices and teleworkers who need to be connected to larger enterprise
networks as well as small businesses. These routers help extend corporate networks to secure remote sites while
giving users access to the same applications found in a corporate office. This access applies to both data and voice
applications. When users require WLAN access, visibility and control of network security are even more critical at
the remote site. The Cisco 880 Series meets this need with a single device that combines integrated 802.11g/n
capabilities with security features such as Wi-Fi Protected Access (WPA), including authentication with IEEE 802.1X
with Cisco Extensible Authentication Protocol (LEAP) and Protected EAP (PEAP) and encryption with WPA
Temporal Key Integrity Protocol (TKIP). (Refer to the wireless solution overview and security data sheet for more
information. The Cisco 880 Series models that include the integrated access point can use either autonomous or
Cisco Unified WLAN modes. In Cisco Unified WLAN mode, as part of an enterprise WLAN architecture, all WLAN
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Cisco 881 Integrated Services Router with Integrated 802.11n Access Point
Cisco 880 Series Data Models
WAN Interface
LAN Interfaces
10/100-Mbps Fast
4-port 10/100-Mbps
Ethernet
managed switch
ADSL2/2+ over ISDN
4-port 10/100-Mbps
(Annex B)
managed switch
ADSL2/2+ over POTS
4-port 10/100-Mbps
(Annex A)
managed switch
VDSL2 over POTS
4-port 10/100-Mbps
managed switch
G.SHDSL (ATM)
4-port 10/100-Mbps
managed switch
G.SHDSL (EFM)
4-port 10/100-Mbps
managed switch
Cisco 880 Series SRST Models
WAN Interface
10/100-Mbps Fast Ethernet
G.SHDSL
802.11g/n Option
Yes (Cisco 881W)
Yes (Cisco 886W)
Yes (Cisco 887W)
Yes (Cisco 887V)
Yes (Cisco 888W)
Yes (Cisco 888W)
LAN Interfaces
Voice Ports
4-port 10/100 Mbps managed
4 foreign-exchange-station
switch
(FXS) ports and 1 foreign-
exchange-office (FXO) port
for public-switched-
telephone-network (PSTN)
fallback
4-port 10/100-Mbps managed
4 FXS ports and 1 Basic Rate
switch
Interface (BRI) port for PSTN
fallback
Integrated 3G
Integrated ISDN Dial
Backup
Yes (Cisco 881G)
–
Yes (Cisco 886G)
Yes
Yes (Cisco 887G)
Yes
Yes (Cisco 887VG)
Yes
Yes (Cisco 888G)
Yes
No
Yes
802.11g/n Option
Yes (Cisco 881 SRSTW)
Yes (Cisco 888 SRSTW)
Data Sheet
®
Page 2 of 16