hit counter script

Gigabit Ethernet Module Connectors And Leds; Table 2-3 Fast Ethernet Module Led Descriptions - Cisco CSS5 SSL K9 - Syst. CSS11500 SSL MODULE Hardware Installation Manual

Content services switch
Table of Contents

Advertisement

Chapter 2
Cabling and Troubleshooting the CSS
Note

Gigabit Ethernet Module Connectors and LEDs

Warning
78-16421-01
Table 2-3
describes the FEM LEDs and their indications.
Table 2-3
Fast Ethernet Module LED Descriptions
LED Name
Color
Link
Green
Duplex
Green
If all of the FEM Link and Duplex LEDs blink synchronously, the module has
failed.
The Gigabit Ethernet Module (GEM), model CSS5-IOM-2GE, contains two
1000-Mbps SFP GBICs; 1000BASE-SX or LX with LC-type connectors, or
1000BASE-T with RJ-45 connectors.
The GEM can use the following GBICs with LC-type connectors:
Long-wavelength SFP GBICs (CSS5-GBIC-LX). The longwave length
transceiver (1000BASE-LX) can reach 1,804.4 ft. (550 m) for all multimode
media types. For single-mode fiber, the distance is 16,404 ft. (5,000 m).
Short-wavelength SFP GBICs (CSS5-GBIC-SX). The transceiver distance
can reach from 721.8 ft. ( 220 m) to 1,640.4 ft. (500 m), depending on the
quality of the fiber.
Because invisible radiation may be emitted from the aperture of the port when
no fiber cable is connected, avoid exposure to radiation and do not stare into
open apertures.
Cisco 11500 Series Content Services Switch Hardware Installation Guide
Cabling the CSS 11503 and CSS 11506 Modules
State
Indicates
Off
No link established
On
Link established but no activity
Blinking
Link established with transmit or receive
activity
Off
Port is operating at half duplex
On
Port is operating at full duplex
2-17

Advertisement

Table of Contents
loading

This manual is also suitable for:

11500 series

Table of Contents