Table of Contents
Advertisement
Chapter 7
Wide Area Application Services
Table 7-1
NM WAAS Tab
Element
Registration status with the WAAS
central manager
Register
Refresh
To configure the WAAS device....
WAAS Configuration
WAAS Interface
Router IP address
Service Module Internal IP Address
Service Module External IP Address
Default Gateway
WCCP Protocol Settings
OL-4015-12
Field Reference
Table 7-1
describes the information in the NM WAAS tab.
Description
Cisco SDM shows one of the following:
•
•
To log on to the
click Register.
Note
To refresh the registration status, click Refresh. Cisco SDM
displays a username and password dialog to allow you to
login to the CM.
To launch the central manager device manager, click on the
displayed link.
The name of the WAAS network module; for example,
Integrated Service Engine 0/0.
The IP address of the router interface to the service module.
This is the IP address of the Redirect interface.
The internal IP address assigned to the service module.
(Optional). The external IP address assigned to the service
module.
The default gateway IP address used by the service module.
Cisco Router and Security Device Manager 2.5 User's Guide
Active—The Edge
WAE
central manager. Cisco SDM displays a green icon when
the Edge WAE is registered.
Inactive—The Edge WAE is not registered with the
WAAS central manager. Cisco SDM displays a red icon
when the Edge WAE is not registered.
CM
and register the Edge WAE on the router,
Do not attempt to register until you have configured
the WAAS NM, and entered the Cisco IOS CLI
commands noted at the beginning of this help topic.
WAAS Reference
is registered with the WAAS
7-5
Advertisement
Table of Contents
Troubleshooting
