Table of Contents
Advertisement
Chapter 12
Easy VPN Remote
Table 12-4
Interfaces and Connection Settings Fields
Element
Automatically
Manually
When there is traffic from local
networks (interesting traffic)
Easy VPN Remote Wizard: Server Information
OL-4015-12
Description
With the automatic setting, the VPN tunnel is established
automatically when the Easy VPN configuration is delivered to the
router configuration file. However, you will not be able to control
the tunnel manually in the VPN Connections window. The Connect
or Disconnect button is disabled when this Easy VPN connection is
chosen.
With the manual setting, you must click the Connect or Disconnect
button in the Edit Easy VPN Remote window to establish or take
down the tunnel, but you will have full manual control over the
tunnel in the Edit Easy VPN Remote window. Additionally, if a
security association (SA) timeout is set for the router, you will have
to manually reestablish the VPN tunnel whenever a timeout occurs.
You can change SA timeout settings in the VPN Components
Global Settings
With the traffic-based setting, the VPN tunnel is established
whenever outbound local (LAN side) traffic is detected.
The option for traffic-based activation appears only if
Note
supported by the Cisco IOS image on your router.
The information entered in this window identifies the Easy VPN tunnel, the Easy
VPN server or concentrator that the router will connect to, and the way you want
traffic to be routed in the VPN.
Cisco Router and Security Device Manager 2.5 User's Guide
Creating an Easy VPN Remote Connection
window.
VPN
12-9
Advertisement
Table of Contents
Troubleshooting
