Using Cisco Unified Communications Manager To Configure Mgcp Gateway Support; Prerequisites For Mgcp Gateway Support; Cisco Ios Voice Gateway - Cisco VGD-1T3 Software Configuration Manual

Voice gateway

Table of Contents

Using Cisco Unified Communications Manager to

Configure MGCP Gateway Support

This chapter provides information about using Cisco Unified Communications Manager to configure

MGCP Gateway Support on the Cisco VGD 1T3 voice gateway platform. This chapter describes the

MGCP Gateway support information and configuration procedures and includes the following:

•

Prerequisites for MGCP Gateway Support are defined in the following sections:

•

The following prerequisites pertain specifically to the configuration of MGCP Gateway Support on a

Cisco IOS voice gateway:

•

Americas Headquarters:

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Cisco IOS Release 12.4(20)YA or a later release.

Transcoder and MTP services must be configured on the voice gateway. See

Conferencing and Transcoding for Voice Gateway Routers" on page

SCCP must be enabled on the local interface that the voice gateway uses to register with

Cisco Unified Communications Manager. See the

Communications Manager Interface" section on page

"Configuring Enhanced

67.

"Enabling SCCP on the Cisco Unified

81.

Table of Contents

Chapters

Table of Contents