Table of Contents
Advertisement
Comprehensive Configuration Examples for the
Cisco VGD 1T3 Voice Gateway
This chapter includes sample outputs from the show running-config commands after you have
completed the procedures in the chapter
and have configured various advanced features for the Cisco VGD 1T3 voice gateway.
Sample Configurations for the Cisco VGD 1T3 Voice Gateway
The following examples are useful references for you only if you are experienced with the Cisco IOS
software:
•
•
•
Cisco Unified Communications Manager MGCP with T1 PRI Backhaul
Router# show running-config
Building configuration...
Current configuration : 6948 bytes
!
version 12.4
service timestamps debug datetime msec year
service timestamps log datetime msec year
no service password-encryption
service internal
service access-server modem
!
hostname vgd 1t3
!
boot-start-marker
boot system tftp://192.168.254.254/wykwan/c5400-js-mz
no boot startup-test
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Unified Communications Manager MGCP with T1 PRI Backhaul, page 195
CT3 H.323 Configuration for PRI: Example, page 201
CT3 Trunk Configuration for CAS: Example, page 211
"Verifying Basic Setup on the Cisco VGD 1T3 Voice Gateway,"
Advertisement
Chapters
Table of Contents
Troubleshooting
