Power Connectors; Cisco Me Ac Switch Power Supply; Cisco Me Dc Switch Power Supply; Console Port - Cisco 2431 - IAD Router Hardware Installation Manual
Ethernet access switch
Hide thumbs
Also See for 2431 - IAD Router:
- Software configuration manual (124 pages) ,
- System message manual (106 pages)
Table of Contents
Advertisement
Chapter 1
Product Overview
Power Connectors
These sections describe the power supply features for the Cisco ME AC and DC switches.
Cisco ME AC Switch Power Supply
The Cisco ME AC switch is powered through an internal power supply. The AC power supply is an
autoranging unit that supports input voltages between 100 and 240 VAC. Use the supplied AC power
cord to connect the AC power connector to an AC power outlet.
Cisco ME DC Switch Power Supply
The Cisco ME DC switch power supply supports input voltages between –36 to –72 VDC, 1 to 2 A.
See
To order spare or replacement DC connectors, use one of these sources:
•
•
Console Port
You can connect the switch to a PC by means of the console port and an RJ-45-to-DB-9 female cable.
If you want to connect the switch console port to a terminal, you need to provide an RJ-45-to-DB-25
female DTE adapter. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from
Cisco. For console port and adapter pinout information, see the
section on page
Management Options
These management options are available for the Cisco ME switch:
•
•
OL-7678-01
Appendix C, "Connecting to DC Power,"
Digi-Key, part number 277-1013-ND,
Phoenix Contact, part number 1757035,
B-1.
Cisco IOS CLI
The switch CLI is based on Cisco IOS software and is enhanced to support desktop-switching
features. You can fully configure and monitor the switch from the CLI. You can access the CLI either
by connecting your management station directly to the switch console port or by using Telnet from
a remote management station. See the switch command reference on Cisco.com for more
information.
For setup instructions that use the CLI, go to
CLI-Based Setup Program."
CiscoView application
The CiscoView device-management application displays the switch image that you can use to set
configuration parameters and to view switch status and performance information. The CiscoView
application, which you purchase separately, can be a standalone application or part of a Simple
Network Management Protocol (SNMP) platform. See the CiscoView documentation for more
information.
for instructions to connect the Cisco ME DC switch.
www.digikey.com
www.phoenixcontact.com
Appendix D, "Configuring the Switch with the
Cisco ME 2400 Ethernet Access Switch Hardware Installation Guide
Management Options
"Connector and Cable Specifications"
1-7
Advertisement
Table of Contents
