Advertisement
Available languages
Available languages
To view the Celsius temperatures:
•
Press the °C SELECT pad. The indicator will light up. To
redisplay degrees in Fahrenheit, press the °C SELECT pad
again.
t
°c
NOTE: If the freezer temperature is below zero, the negative sign
next to the freezer display will light up.
Adjusting
Digital Controls
NOTE: Wait at least 24 hours between adjustments.
Recheck the
temperatures
before other adjustments
are made.
To adjust set point temperatures:
•
Press the refrigerator or freezer PLUS (+) or MINUS (-) pad
until the desired temperature
is reached.
I_EFRI®ERA_Ior_
Warmer
+
Colder
The set point range for the freezer is -5°F to 5°F (-21 °C to -15°C).
The set point range for the refrigerator is 33°F to 41 °F
1°C to 5°C).
CONDITION/REASON:
TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold
REFRIGERATOR Control 1°
Not set correctly for conditions
higher
REFRIGERATOR too warm
REFRIGERATOR Control 1°
lower
High use or room very warm
FREEZER too cold
FREEZER Control 1° higher
Not set correctly for conditions
FREEZER too warm/too little
FREEZER Control 1° lower
ice
High use or heavy ice use
Additional
Digital Control
Panel Features
Additional features are located on the control panel at the top of
the refrigerator compartment.
Water Filter Indicator Light and Reset
See "Water Filter Status Light."
Max Cool
The Max Cool feature assists with periods of heavy ice usage, full
grocery loads, or temporarily
warm room temperatures.
•
Press MAX COOL pad to turn on the Max Cool feature. The
Max Cool indicator light will remain on for 24 hours unless
manually turned off.
Cool
NOTE: The temperature
display will not change. After
24 hours, the refrigerator returns to the previous temperature
set points.
Accelerated
Ice Production
(on some models)
This feature assists with temporary periods of heavy ice use by
increasing ice production
over a 24-hour period.
•
Press OPTIMICE touch pad to turn on the Optimlce ®feature.
The Optimlce ®setting will remain on for 24 hours unless
manually turned off.
If increased ice production
is desired at all times, set the
Freezer Control to a colder number. Setting the freezer to a
colder temperature
may make some foods, such as ice
cream, harder.
Temperature
System
The Temperature System feature lets you know the compressor
or evaporator fan is running. It is normal for this indicator light to
be on.
Temperature
System
Cut Hazard
Use a sturdy gBase when dispensing
ice or water.
Faimure to do so can reeumt in cuts.
Depending on your model, you may have one or more of the
following options: the ability to select either crushed or cubed
ice, a special light that turns on when you use the dispenser, a
special AUTO mode, or a lock option to avoid unintentional
dispensing.
The Ice Dispenser
Ice dispenses from the ice maker storage bin in the freezer. When
the dispenser lever is pressed:
•
A trap door opens in a chute between the dispenser and the
ice bin. Ice moves from the bin and falls through the chute.
•
When you release the dispenser lever, the trap door closes
and the ice dispensing stops. The dispensing system will not
operate when the freezer door is open.
Some models dispense both cubed and crushed ice. Before
dispensing ice, select which type of ice you prefer. The button
controls are designed for easy use and cleaning.
Style 1
Style 2
c_
n
ICE
CRUSH
CUBE
Crushed
Cubed
13
Advertisement
