Cisco Catalyst 3120 Command Reference Manual page 711

Catalyst blade switch 3120 for hp command reference

Hide thumbs Also See for Catalyst 3120:

Table of Contents

Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands

This example shows how to provision a switch with a stack member number of 2 for the switch stack.

The show running-config command output shows the interfaces associated with the provisioned switch:

Switch(config)# switch 2 provision WS-CBS3120G-S

Switch(config)# end

Switch# show running-config | include switch 2

interface GigabitEthernet2/0/1

interface GigabitEthernet2/0/2

interface GigabitEthernet2/0/3

You also can enter the show switch user EXEC command to display the provisioning status of the switch

This example shows how to delete all configuration information about a stack member 5 when the switch

is removed from the stack:

Switch(config)# no switch 5 provision

You can verify that the provisioned switch is added to or removed from the running configuration by

entering the show running-config privileged EXEC command.

Related Commands

show running-config

Displays the operating configuration. For syntax information, use this link to

the Cisco IOS Release 12.2 Command Reference listing page:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_command

_reference_list.html

Select the Cisco IOS Commands Master List, Release 12.2 to navigate to

the command.

Displays information about the switch stack and its stack members.

Cisco Catalyst Blade Switch 3120 for HP Command Reference

switch provision