Debug Dot1X - Cisco Catalyst 3120 Command Reference Manual

Catalyst blade switch 3120 for hp command reference

Hide thumbs Also See for Catalyst 3120:

Table of Contents

Cisco Catalyst Blade Switch 3120 for HP Debug Commands

debug dot1x

Use the debug dot1x privileged EXEC command to enable debugging of the IEEE 802.1x authentication

feature. Use the no form of this command to disable debugging.

Syntax Description

state-machine

Though visible in the command-line help strings, the redundancy keyword is not supported.

Command Default

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug dot1x command is the same as the no debug dot1x command.

When you enable debugging, it is enabled only on the stack master. To enable debugging on a stack

member, you can start a session from the stack master by using the session switch-number privileged

EXEC command. Then enter the debug command at the command-line prompt of the stack member. You

also can use the remote command stack-member-number LINE privileged EXEC command on the stack

master switch to enable debugging on a member switch without first starting a session.

Related Commands

show debugging

debug dot1x {all | errors | events | feature | packets | registry | state-machine}

no debug dot1x {all | errors | events | feature | packets | registry | state-machine}

Display all IEEE 802.1x authentication debug messages.

Display IEEE 802.1x error debug messages.

Display IEEE 802.1x event debug messages.

Display IEEE 802.1x feature debug messages.

Display IEEE 802.1x packet debug messages.

Display IEEE 802.1x registry invocation debug messages.

Display state-machine related-events debug messages.

Modification

This command was introduced.

Displays information about the types of debugging that are enabled.

Displays IEEE 802.1xstatistics, administrative status, and operational status

for the switch or for the specified port.

Cisco Catalyst Blade Switch 3120 for HP Command Reference